Quick Question!

Have you ever purchased from PartSelect.com before?

11751688-3-S-Whirlpool-WPW10275768-Door Latch with Switches - NO Handle
11751688-3-S-Whirlpool-WPW10275768-Door Latch with Switches - NO Handle https://www.partselect.com/Schematics/Maytag/54089.gif

Door Latch with Switches - NO Handle

Your Price

$30.29
Order within the next 5 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11751688
Manufacturer Part Number WPW10275768
Manufactured by Whirlpool

This door latch, used in dishwashers, is located at the top of the door and locks the door shut when the dishwasher is working. If the door will not close or is damaged, changing the latch could be the solution. For this repair, remove all screws from the inner panel, then lift up the inner door panel and hold the door apart. Next, access the latch and pull wires from the switches. Refer to the manual provided by the manufacturer for further instructions and guidance. Remember to unplug the dishwasher from the power source or shut off the house circuit breaker before beginning this installation project.

This part works with the following brands: Maytag, Jenn-Air, Amana, Admiral, Magic Chef, Crosley.

This part works with the following products: Dishwasher.

This part fixes the following symptoms:

  • Door latch failure.
  • Door won’t close.
  • Will Not Start.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

How to remove old broken latch

Ken
Answer:

Hi Ken, First and foremost, make sure to unplug your appliance and turn off the water supply. You will have to remove all of the screws holding the inner door panel to the outer door panel. You should then be able to pop off your old latch. If the wire harness is hard to remove from your latch you can use a flat head screw driver to help push the plugs off of the old terminals. Make sure to replace your handle as this part does not come with your handle already attached. After you have done that, just follow these steps in reverse to put your appliance back together. I hope that helps!

1 person found this helpful.

Most Recent

Question:

Is it possible to get the handle and not the entire switch

Juan for model number adb1200awq
Answer:

Hi Juan, Thank you for your question. Unfortunately no. You have to get the handle with the entire latch assembly. I have linked the correct part below for you. Good luck with your repair.

1 person found this helpful.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 70 reviews What's this?
 

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Robert from Lancaster, NY

Door handle was jammed up and closed very rough.

The part was great! It was like a cartridge that plugs into the appropriate slots and done! So glad I didn't call a repair man to do this. Anyone that is considering fixing their dishwasher should check out doing it themselves. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Scott from Maryville, IL

Dishwasher would run for a few minutes and then shut-off

It seemed like a control unit problem to me, something in the board. It was basically a guess,every once in awhile you get lucky. I took off the inner panel for the door (shut power off to unit!) Removed the control board screws, released tabs on harness connector and changed board out. It works fine now. Rather be lucky than good any day.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
  • Door Latch with Switches - NO Handle
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Ralf from Manchester, TN

Door would not lock

I called for a Lowes where I purchased the dishwasher was told it was out of warranty, they set up for a repairman to come out and fix it. He came out and told me it would be $190.00 for parts and labor but that didn't include the service call of $60.00 dollars. Total bill would be $250.00, plus it would be another 2 weeks before he would be able to get back because he had to order the part but and get this I would get the part delivered to the house before the two weeks, and that he wouldn't guarantee the part for more then 90 days.
I told him no way, so I researched the internet and found this site part cost $25.00 dollars my time about 30 min. SAVINGS of $225.00.
The part was pretty easy to install had to take out a few screws around the edge. Only trouble I had was putting in the handle but I figure that out and put everything back together again.
I would purchase parts from this company again had it within 2 days, at a very reasonable cost.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Door Latch with Switches - NO Handle
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Pliers, Screw drivers
Customer: Lloyd from Denver, NC

Unit would not turn on.

After checking the door switch I found the micro switches were working but the unit would not start on the control panel. Thinking the latch was worn, I ordered a replacement. After changing the replacement latch and switches that came with it, the unit would still not start. I checked the switch and it is making contact. I can start the unit after I close the door using the handle of a pair of pliers. So I assume the control board is bad, due to the fact that it will not initialize the control panel until the door is closed. Now I have ordered a control board and will replace...stay tuned!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Door Latch with Switches - NO Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Mandy from Lafayette, CA

Door would not close - latch broken

1. Turned off power. 2. Unscrewed ten screws holding inside of door in place. 3. Lifted cover enough to access latch - helpful to have someone to hold this while doing the job. 4. Disconnected old latch assembly on each side - this was the hardest part as they were stiff and needed to be pulled hard. 5. Attached new latch assembly. 6. Screwed door panel back on. 7. Switched power back on. So easy and saved about $150. This stuff is NOT HARD and I just wish more people had the gumption to do repairs themselves instead of paying 'experts' to do exactly the same job.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Door Latch with Switches - NO Handle
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: peter from redondo beach, CA

Door det not lock

Replase door lach Thang you for the fast respons Peter Hansen

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Door Latch with Switches - NO Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Eduardo from Whittier, CA

Plastic part was worn out

the small plastic part that turns the dishwasher off and on when the door is shut was worn out. It was really easy to change out. I unplugged the power cord and removed the black and white wires. Put in the new switch and it was ready.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Pliers
Customer: Jason from Edmonds, WA

Broken latch

Upon noticing that my latch was broken I removed the 10-12 torx scres from the inside of the front panel. After lifting up the inside panel, I removed the two floats from the latch assembly. I did not turn off the power at the breaker but did get a few volts in removing the float switches. When I received my parts, it took about 15 minutes to reattach the handle kit to the front panel and seal up the door. I did turn the power off at the breaker so there was no issue in stalling the wires and float switches to the handle assembly. I di order both the Latch and Latch Assembly that was shown in the picture without the latch. I was happy to see the latch already atteched to the latch assembly and I have sent the latch back for a full refund. Easy assembly and install.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Door Latch with Switches - NO Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Robert from Blue Bell, PA

Easy fix for a broken door latch

Removed the screws that attach the inside of the door, keeping them in order. Two are longer. The part is loose at that point and the wires un clip with a little pull with a needle nose. Replaced with the new part, re screwed and good as new. oh and turned off the breaker before disassembly.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Mark A from Springtown, TX

Broken door handle

unscrewed interdoor to expose harness. Replace
handle assembly.
Very easy to do and very satisfied with new part. I ordered 2 parts to make sure I had the actual one with door handle release. One of the assemblies came without the actual handle but at least if I have a switch problem I will have the Harness and switch assembly.

Happy Camper

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Door Latch with Switches - NO Handle
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Mark from laguna niguel, CA

Latch handle broken

the removal of panel was simple, the removal of electrical connections was difficult even with a little wd 40 i was nervous when any metal part is attached to a plastic part. it didn't want to let go but my suggestion is to work the connecter back and forth forward and back to get it started then with a firm grip on the wire harness with pliers pull the two apart with pliers. good luck!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Door Latch with Switches - NO Handle
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: RG from St Simons Island, GA

Latch had broken off inside

removed all the torx screws that hold the inside panel to the door. Removed the latch/switch.[Don't forget to turn off the power] Could not remove the wiring harness from the micro switch so I removed the old micro switches from the old switch and moved them to the new switch, harness and all. repositioned the latch and reattached the panel.
there are two latches available. I ordered the wrong one at first. Got the correct one in just two days. Was able to return to wrong one for credit.
Great service. Glad I didn't call a repairman.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Door Latch with Switches - NO Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Ron from Roanoke, TX

It was too easy.

Matching the part I had in my hand with the picture online was a cinch. Rec'd the latch in a few days, and installed it in minutes. Why did I wait so long to look it up and order? At least the kids think I'm a hero for fixing the dishwasher!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Marilyn from Pauma Valley, CA

Latch was broken

I removed the screws from the door, popped out the broken part, installed the new door latch and replaced the screws. The repair was fast and easy. Reading others comments about how to do the repair here helped a lot. Ordering from this company and finding the correct part couldn't have been easier. I feel fortunate to have stumbled upon this website. Fixing this on my own saved me a lot of money. Just for kicks I checked online with Sears. I found the part but they would not let me order it, I would have to request someone to come out and repair it for me, LOL! Thank you Part Seclect!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Door Latch with Switches - NO Handle
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: george from austell, GA

Door would not open/latch pivot pin broken.

After prying open the door i removed the inner skin cover which did provide me access to the latch assy,2 additional screws and it was fixed.

This appears to be a problem with this apliance since it has done this before while under warranty

Help other customers find the most helpful instructions.

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11751688
Manufacturer Part Number: WPW10275768
Brand Model Number Description
AmanaADB1200AWBDishwasher - Tall Tub
AmanaADB1200AWQDishwasher - Tall Tub
AmanaADB1200AWSDishwasher - Tall Tub
AmanaADB1200AWWDishwasher - Tall Tub
AmanaADB1500AWBDishwasher
AmanaADB1500AWB10Dishwasher
AmanaADB1500AWB37Dishwasher
AmanaADB1500AWQDishwasher
AmanaADB1500AWQ10Dishwasher
AmanaADB1500AWQ37Dishwasher
AmanaADB1500AWSDishwasher
AmanaADB1500AWS10Dishwasher
AmanaADB1500AWS37Dishwasher
AmanaADB1500AWWDishwasher
AmanaADB1500AWW10Dishwasher
AmanaADB1500AWW37Dishwasher
AmanaADB1500AWZDishwasher
AmanaADB1500AWZ10Dishwasher
AmanaADB1500AWZ37Dishwasher
AmanaADB2200AWBDishwasher
AmanaADB2200AWQDishwasher
AmanaADB2200AWSDishwasher
AmanaADB2200AWWDishwasher
AmanaADB2500AWBDishwasher
AmanaADB2500AWB37Dishwasher
AmanaADB2500AWQDishwasher
AmanaADB2500AWQ37Dishwasher
AmanaADB2500AWSDishwasher
AmanaADB2500AWS37Dishwasher
AmanaADB2500AWWDishwasher