Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Richard A P - December 22, 2022
Verified Purchase
Part replacement was great. Installation was a bit difficult.
service (delivery) was excellent.
★★★★★
★★★★★
Claudia P - January 10, 2019
Verified Purchase
Work as expected
My order was shipped fast i will recommend part select when you are looking for an oem part
★★★★★
★★★★★
Sandra C - June 26, 2018
Verified Purchase
Easy repair; perfect part
Everything came quickly; son made repair-works great now!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water intake hose leaked between plastic/hose connection (metal crimped clamp)
Since I had never made a repair on this 14 year old Kitchen Aid dishwasher, it was "discover as you go." First turned it on its back, took off bottom, disconnected both hoses and found out that hoses would not move. So, had to take off top and remove the back/side unit to get to hoses on top side where they were fastened by tape and a hos
... Read moree holder. Replaced hoses, used old clamp and "buttoned" it up.
Replaced the hose assembly on a Kenmore portable dishwasher/
Bob from Fort Sumner, NM
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable), Wrench set
21 of 42 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drain and hose coupler would pop off the faucet under pressure
I removed all the cabinet screws (be careful, they use a special star bit and mine broke so I replaced all the screws with hex head sheet metal screws which was OK). I then removed the top-very easy, 3 screws. Disconnected two hoses at bottom of machine, one with a clamp that needed to be unscrewed the other was standard hose a
... Read morettachment. Put a shallow pan under the hose area where you will be removing them. There will be some water. Remove the hose assembly from the special plastic holder on the inside of the cabinet and remove the assembly from the entry point at the rear of the cabinet. Insert the new hose assembly, connecting the hoses first. Check the old hose to determine roughly where it had been bracketed to the cabinet making sure you will have enough hose to reach your faucet. I left no slack inside the machine beyond the plastic holder. Reassemble the cabinet to the frame loosely screwing it in until all screws are in. The finish tightening them all. Reinstall the top. Unscrew the old faucet connector and screw in the new one until fully hand tight. If you use a pair of pliers to tighten it more, protect it from the tool buy using a cloth of plastic jar cover remover to prevent damage. Connect the machine to the faucet, plug it in and let her rip. Mine was leak-less but NOTE- I connected it and tested it before re-assembling the cabinet, Otherwise you won't know if your connections were tight until its too late.
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ashlyn
September 16, 2019
I don't need the hose just the attachment , unsure of the name but it attaches to the hose and the faucet.
For model number 665744120
Hello Ashlyn, Thank you for the question. Very sorry the adapter is only sold as part of the
Drain and Fill Hose Assembly. Hope this helps!
15 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
February 1, 2018
How to change drain hose assembly
Hi Jim,
Thank you for your question. To replace the hose assembly you would pull our your dishwasher if you have it tucked away somewhere under a counter. Then you would unscrew your old hose from the water inlet valve at the bottom of your dishwasher and you would screw in the new hose. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
December 28, 2017
I need a longer hose assembly for my dishwasher.
For model number 66517822000
Hi Mary,
Thank you for your question. This is the only size of drain hose for your appliance according to your model information. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Evelyn
August 1, 2019
Where can i find this part from for my Whirlpool portable washer?
Hi Evelyn, thank you for contacting us. If you are looking to purchase this part then you can do so by either adding it to your cart and going through the check out process online, or by calling our customer service line and ordering with one of our agents. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cliff
January 28, 2018
Don't have any idea on what part or parts to order. My portable dishwasher fills correctly, and starts wash cycle correctly. But, as it is washing, the water is being pumped out. It continues wash cycle with no water. Any idea on what part(s) i should be ordering? Thanks for any help.
For model number DP840DWGX1
Hello Cliff, Thank you for your inquiry. We would recommend checking the drain pump diaphragm, the impeller and seal kit, the drain pump, and the drain hose. Hope this helps!
Was this helpful?
Thank you for voting!
Dave
July 4, 2019
I need extension hoses at least 30 in. Longer than the original
For model number Ingrid dishwasher citation scoutmaster
Hi Dave, thank you for your question. Please resubmit your question on the site with the model number of your equipment so that we can find the parts and information for you. Thank you.
Was this helpful?
Thank you for voting!
Sherry
November 9, 2019
Looking for drain and fill assembly that can be used for this model number
For model number DP1040XTXB0
Hello Sherry, Thank you for the question. Sadly,this kit/assembly is not sold for this model . I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Was this helpful?
Thank you for voting!
Yaz
December 27, 2019
I am looking for extension for the hose for the portable dishwasher Kenmore.
For model number 6473847737
Hello Yaz and thank you for writing.
The model number you provided is not recognized. Please verify the number you provided us. If it is correct, we recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part! We do carry related parts for units just like yours. For example, part number PS11746591 Good luck with your repair.
Hello Kaitlyn, thank you for your question. Unfortunately, that part is not compatible with that unit.
Was this helpful?
Thank you for voting!
Steve
January 11, 2020
Can i order just a replacement hose or do I need to buy the whole assembly?
For model number WPW10273574
Hi Steve. We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
