Drain and Fill Hose Assembly WPW10273574 | Official Whirlpool Part | Fast Shipping | PartSelect
Drain and Fill Hose Assembly – Part Number: WPW10273574
Drain and Fill Hose Assembly – Part Number: WPW10273574 Drain and Fill Hose Assembly – Part Number: WPW10273574 Drain and Fill Hose Assembly – Part Number: WPW10273574 Drain and Fill Hose Assembly – Part Number: WPW10273574 https://partselectcom.azureedge.net/Schematics/Whirlpool/5GPTJDTW.gif

Drain and Fill Hose Assembly

Product Description

Drain and Fill Hose Assembly Specifications

This part is used for portable dishwashers.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Leaking

This part works with the following products:

Dishwasher.

This part works with the following brands:

Kenmore, Whirlpool, Inglis.

Part # WPW10273574 replaces these:

3370321, 3378107, 3378117, 3378120, 8275398, W10217171, W10217197, W10273574, WPW10273573.
Questions and Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 3 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ronald from New Britain, CT
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WPW10254672, WPW10273574
Drain and hose coupler would pop off the faucet under pressure
I removed all the cabinet screws (be careful, they use a special star bit and mine broke so I replaced all the screws with hex head sheet metal screws which was OK).
I then removed the top-very easy, 3 screws.
Disconnected two hoses at bottom of machine, one with a clamp that needed to be unscrewed the other was standard hose attachment. Put a shallow pan under the hose area where you will be removing them. There will be some water. Remove the hose assembly from the special plastic holder on the inside of the cabinet and remove the assembly from the entry point at the rear of the cabinet. Insert the new hose assembly, connecting the hoses first.
Check the old hose to determine roughly where it had been bracketed to the cabinet making sure you will have enough hose to reach your faucet. I left no slack inside the machine beyond the plastic holder. Reassemble the cabinet to the frame loosely screwing it in until all screws are in. The finish tightening them all. Reinstall the top.
Unscrew the old faucet connector and screw in the new one until fully hand tight. If you use a pair of pliers to tighten it more, protect it from the tool buy using a cloth of plastic jar cover remover to prevent damage. Connect the machine to the faucet, plug it in and let her rip. Mine was leak-less but NOTE- I connected it and tested it before re-assembling the cabinet, Otherwise you won't know if your connections were tight until its too late.
20 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Bob from Fort Sumner, NM
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable), Wrench set
Parts Used:
WPW10273574
Head on hose would not grip faucet - leaked.
Replaced the hose assembly on a Kenmore portable dishwasher/
20 of 41 people found this instruction helpful.
Was this instruction helpful to you?
Stanley R from Pineola, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WPW10273574, WPW10509257
Water intake hose leaked between plastic/hose connection (metal crimped clamp)
Since I had never made a repair on this 14 year old Kitchen Aid dishwasher, it was "discover as you go." First turned it on its back, took off bottom, disconnected both hoses and found out that hoses would not move. So, had to take off top and remove the back/side unit to get to hoses on top side where they were fastened by tape and a hose holder. Replaced hoses, used old clamp and "buttoned" it up.
10 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
2 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11751626
Manufacturer Part Number: WPW10273574
Brand
Model Number
Description
Kenmore
66517422990
Dishwasher
Kenmore
66517422991
Dishwasher
Kenmore
66517422992
Dishwasher
Kenmore
66517425790
Dishwasher
Kenmore
66517425791
Dishwasher
Kenmore
66517425792
Dishwasher
Kenmore
66517432001
Dishwasher
Kenmore
66517432002
Dishwasher
Kenmore
66517439000
Dishwasher
Kenmore
66517439001
Dishwasher
Kenmore
66517439002
Dishwasher
Kenmore
6651744993
Dishwasher
Kenmore
6651744994
Dishwasher
Kenmore
66517459000
Dishwasher
Kenmore
66517459001
Dishwasher
Kenmore
6651761590
Dishwasher
Kenmore
6651761591
Dishwasher
Kenmore
66517621690
Dishwasher
Kenmore
66517621691
Dishwasher
Kenmore
66517621692
Dishwasher
Kenmore
66517625690
Dishwasher
Kenmore
66517625691
Dishwasher
Kenmore
66517625692
Dishwasher
Kenmore
6651765190
Dishwasher
Kenmore
6651765191
Dishwasher
Kenmore
6651765192
Dishwasher
Kenmore
6651765193
Dishwasher
Kenmore
6651765194
Dishwasher
Kenmore
6651765590
Dishwasher
Kenmore
6651765591
Dishwasher