Removed one philips head screw. Installed new part,reinserted screw.
William J from Wyandotte, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishes were not getting clean; thought we were going to have to replace our 12 year old dishwasher.
I removed one screw in the old spray arm and replaced the arm; then replaced the screw. My 'less than $10 part saved me the cost of a repair man. The dishwasher now operates as good as new. Max Briggs, Indianapolis
MAX from Indianapolis, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken upper wash arm stabalizer bracket...
very easy to fix..i replaced many other parts while i was at it..figured i d "upgrade". washes much better now....less noisy..
Upper spray arm mount broke which eventually caused the spray arm feed tube to break as well
Removed one screw which connects the upper spray arm mount, the spray arm feed tube, and the upper spray arm. Replaced with new parts ordered from partselect and it works as good as new. Highly endorse this website!
Two piece water distribution tube kept falling off. Fell on to heating element and melted
Eay repair. Replacement tube was one piece and only required removing one phillip's head screw to replace
Randall from Logan, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken spray arm feed tube
Unscrewed the broken one and just screwed the new one on.....really easy and now it works like new!
Kathleen from Cornwall, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
feed tube worn out
First I ordered the wrong part as it was changed to a kit. reordered new parts and recieved them in less than 24 hrs. Took about 5 minutes to finish the job. Thannks to the young lady I talked to for helping me to order the right part and I have a hard time hearing and her southern draw msde it harder to understand but worked with me and
... Read morewe got things done!!!!!!!!!
Read less
John from Eagle, NE
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
1 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer arm at the bottom was flopping around causing the dishwasher to appear to leak.
Washer arm at the bottom was loose and flopping around and making waves when the bottom was full of water . This caused the dishwasher to appear to leak. For the Washer Arm Bearing Ring, First I removed the bottom drawer. Then I unscrewed the retaining screw with my fingers. and lifted off the wash arm. I then removed and replaced
... Read morethe Wash Arm Bearing Ring which looks like a top hat with the top cut out. The rim of the " hat " on the one I removed had completely worn away and looked like a 3/4 inch cylinder It took a couple. of minutes to figure out which part I really had to replace. I then put back the wash arm and tightened the screw back, replaced the drawer and everythig worked perfectly.
For the Spray Arm Feed Tube, I first unscrewed the one screw holding the old tube in place. The old part was orginally in two parts. The new part is only one piece. I placed the new part in its place, and replaced the screw.
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jonathan
January 20, 2018
Does part PS11751313 come with the attachment screw?
For model number GU940SCGT3
Hello Jonathan,
Thanks for your question. No, the attachment screw is sold separately under part number PS11753412.
I hope this helps.
My previous email and question did not contain the full model # gu980scgq2. Will manifold wpw10258149 fit this model? If not, do you have a similar part that will?
For model number GU980SCGQ2
Hello Bob, Thank you for your inquiry. We show that the correct middle spray arm/manifold for the model number you provided is part# WP3378144. Hope this helps!
Was this helpful?
Thank you for voting!
David
November 4, 2023
Will this part work with this model? What are the product dimensions?
For model number 665.15955792
Hello David, Thank you for your inquiry. We do not show this part as compatible to your model. The compatible part number is PS382824. We hope this helps.
