The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold.
Note: This part has been updated by the manufacturer. It will appear different but will still function the same as the original.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Amana Refrigerator Water Inlet Valve - 120V 60Hz
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Leaking | Not dispensing water
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jon B - December 1, 2018
Verified Purchase
received part promptly, correct part
part was correct
★★★★★
★★★★★
Gerry M - August 4, 2018
Verified Purchase
Worked as expected.
Part was received very fast. Worked perfectly. Appliance up and running!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 40 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Neither the water or ice dispensers were working
I'm sharing this story because what appeared to be the fault of a defective water inlet valve, turned out to be something else. Maybe it will be helpful to you. Because the refrigerator and not been hooked up to water for several months, several knowledgeable people suggested I replace the solenoid valve, as its malfunction was the lik
... Read moreely problem. I did so, without results. That is, still no water or ice. Then I remembered, the door with the dispensers had been removed and replaced at the beginning of the period in which there was no water hook-up. Looking for some other reason the dispensers did not work, it occurred to me it might be the wiring from the door to the body of the refrigerator, and so it was. When the door was reinstalled, they misaligned the four-wire plug, resulting in faulty connections. When I rotated the plug to get the colored wires to match up, everything worked as it should. Had I thought of that first, I could have saved $70 on a valve I did not need.
Read less
Jeffrey from NORTHRIDGE, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No water through door
I replaced the fill valve by first unplugging the referigerator turning offf the water supply before removing the cover to gain access to the water valve. I removed to bracket from the old fill vale and installed on new valve. Reversed the above and it fixed the problem. I ordered the part from PartSelect for this twenty five year old ref
... Read moreerigerator and received it the next day. Fastest service ever! Right part too!
Read less
Watson from Denton, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
split/cracked water solenoid valve
very easy. removed the old solenoid because it was cracked and spraying water all over the floor. installed the new part, turned on water supply and that was it!! water dispenser in the door works better, it fills a glass faster and the ice maker works better too.
christopher from colfax, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Wrench set
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was leaking at the point where the water line enters the frig
Ordered a new pump (inlet valve) and installed and problem corrected.
Larry from Cary, NC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking water from bottom
Somebody else wrote a really good description of how to repair, he should write manuals! So, read his..I will just add, most of us have phones that take pictures, so I took pictures and video before I started, so then I could remember how everything went back together.
Jeff from Las Vegas, NV
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker end cap was broken, and water did not come out of the front.
Removed the ice tray took the screws out and installed the end cap, then took the cardboard cover off the back removed two screws unscrewed the water lines and replaced the water inlet valve. Should have done this years ago. What an easy fix. It was real nice to talk to a tech that was able to tell me what was wrong and how to fix the pr
... Read moreoblem. Saved me alot of money!
There are 2 main parts to repair an icemaker. I replaced the inlet valve first--it is the least expensive. Just unplug frig and bend plastic inflow hose in half and hold with a rubber band. This keeps water from leaking out. Take out old valve and reinstall new exactly as the old. There are only 2 electric connections and 3 water, so it
... Read more is hard to go wrong;just put it back together the way you took it apart. Plug in and open water inlet. Unfortunately the icemaker still did not work. So I replaced the icemaker. Take out the bucket. Take the 3 screws out that hold up the icemaker. In order to unplug the wiring harness, I had to also remove the metal mounting plate behind the icemaker to allow access to the plug-in on the left posterior side of the icemaker. Push in the raised part of the plug to allow for easy removal from the icemaker plug receptacle. Remember what color wire is on top for easy replacement later. Once the icemaker is free, take it out and install the bail from the old icemaker. The left side is the important one that engages the mechanism;the right side is just a tender or slave to the drive mechanism on the left to keep it in position. Plug the wiring harness back in--correct side up and be sure to fully engage the raised part of the plug to lock solidly in place.Remount the metal icemaker mounting plate with the 4 screws to the side walls of the freezer. Quarters are a little tight here on a side-by-side so put a paper or something under your work to catch screws that are easy to drop. A magnetized nut driver works best here. Then secure the icemaker to the mounting plate with the 3 original screws. Remount the bucket and lower the bail. Turn the electric and water back on. I had ice cubes in the bucket starting at about 2 hours.
Read less
Michael from West Liberty, IA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no water pressure at water dispencer
pulled cover off back of refrigerater at the water line,shut water off removed water line,check for pressure at the line by puting the line into a 5 gallon bucket it was ok.took the dispencer lines off that goes up to dispencer,hit dispencer switch could hear buzzing at the dispencer unit but no pressure.so i replace water inlet valve
robert from gray, ME
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water kept running out of water dispenser
Repair man wanted $240.00 to fix this problem. I simply removed panel from bottom of back of refrigerator and disconnected two screws and the water and the part was free reconnected water and the two screws and done deal with a $40.00 part.
Richard from Austin, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
8 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker not making ice, also needed drumwheel for the front of the ice bucket, wouldn't crush ice , and ice would get stuck
Took the rear bottom panel loose , the ice maker and water dipenser valve is in the right corner. Turn off water line to the refrigerator , and also unplug the electric from the outlet. It is easier to take the ground wire loose from the valve bracket now , before taking valve out of the bracket. take the two water lines that run to the d
... Read moreoor and the ice maker loose, then remove the main inlet line. Once you have the water lines off, then you can remove both electrical plugs from the electric coils. The water lines that run to the door and the ice maker cant be confused , because they are two different sizes , so they will only fit the correct side. The electrical plugs are pretty simple as well as, the wires are the same color as the coils, so its fairly easy to see which one goes where. The replacement process is pretty self-explanitary , just reverse the order. Just as a hint of advice , have a sponge or mop ready to clean up the water that comes out of the lines when you remove them. I also changed the drum wheel in the front of the ice bin, this process is not easy if you let the blades and spacers fall apart , as they have to pretty much have to be in correct order , or your ice bin will not crush ice , and you could possibly bust the bin into pieces. The process is not really hard , just pay close attention to what is coming off from where!!! There are two bolt on the bottom of the front cover , take them loose and pull the cover forward from the bottom, then lift a little , should come off. Then the metal front cover should be exposed, ther are two bolts in it as well , remove them , and the front should be loose , this is when you hold the auger and keep an eye on the blades. There is also a nut , right in the center of the wheel you have to take loose , hold the auger then take the nut loose with a 1/2 in. wrench. Once you remove the nut the drum pulls right off the auger. When going back together , make sure the ice crusher blades all line up correctly , as the blades wont work at all . They have to slide back into the blade pivot bracket (slot made into the plastic bucket front). As I said before , be sure and pay close attention , and this process will go easily. The drum is marked front side , or this side out, be sure its installed correctly , as the ice will not feed right. The first cycle of the ice maker making ice will probably be only 1 or 2 cubes , but the second time around you will have a full set of 8 , the water lines get air in them while they are unhooked so you wont get a full cycle the first time.
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kenneth
May 6, 2018
Do I need both water inlet valves or is it one unit?
Hello Kenneth,
Thanks for your question. This water inlet valves includes both solenoids in one unit, though your model may use additional valves depending on your model number.
I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
James
September 16, 2019
Water inlet valve cant be removed or replaced. Why?
For model number Arb9059cs Amana
Hello James, Thank you for the question. Yes, the valve can be removed and replaced. Please see the video on the site on installing a new valve. Here is a link for the same video to YouTube as well. Hope this helps!
https://www.youtube.com/watch?v=nZXMIOxndxI
Was this helpful?
Thank you for voting!
Darius
November 16, 2017
Water inlet valve (part number wpw10245167 replaces: 0312510, 4343698, 4343985, 8170671, d7742202, d7742203, d7742204, w10245167, y0312510), has a large opening for the water inlet 1/4" tube nut to connect to. What is the part number and where can i find that large water inlet connector?
For model number Amana Refrigerator SRD25S5W
Hi Darius,
Thank you for your inquiry. We have the water tube connector available for you if you would like to purchase it. You would find the part in your refrigerator down by the water inlet valve. The part number for it is PS11742446. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
James
September 16, 2019
The video for replacing the wiv is unavailable (youtube)
For model number Arb9059cs
Hello James, thank you for contacting us. Here is a direct link to the YouTube video for this part. https://www.youtube.com/watch?v=nZXMIOxndxI. Good luck with your repair!
Was this helpful?
Thank you for voting!
Keith
November 28, 2022
Will this WPW10245167 valve work on my model Amanda refrigerator?
For model number Amanda SXD22S2W side by side
Hello Keith, thank you for your question. Yes, the Water Valve PS11750968 you had chosen is compatible with your model. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
