This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, your washer door may not close properly and you may not be able to run your washer. The latch is found under the lid and can be screwed out and replaced. You will need a Phillips-head screwdriver for this repair. This part is sold individually and is and OEM part from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer Lid Latch Strike
Troubleshooting
This part fixes the following symptoms:
Will Not Start | Lid or door won’t close
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag, Kenmore, Amana.
Part# WPW10240513 replaces these:
AP6017583, W10240513, WPW10240513VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
4.1
Filter By Rating:
5 Stars
5
4 Stars
0
3 Stars
2
2 Stars
1
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
N Lee M - December 15, 2022
Verified Purchase
Replacement
My original latch though the years broke. Bought this replacement latch. Works better than the original one.
★★★★★
★★★★★
Michael M - October 21, 2022
Verified Purchase
Easy Fix
Everything was excellent.
★★★★★
★★★★★
Dennis U - November 17, 2018
Verified Purchase
The part I received was exactly what I needed.
The part was ordered to replace one that was lost! They primary Laundry person does not deal well with a lid that locks, so she removed the screws to defeat the lock. I lost the part, so, in order to do laundry, had to order a replacement.
★★★★★
★★★★★
Shirley M - September 7, 2018
Verified Purchase
I need another part asap and this one is defective
The part finally came worked three days great and now doesn't . I need another replacement part and I will return the one that is defective
September 10, 2018
Hello Shirley, Thank you for leaving a review on the part ordered. Checking the order I am showing we have already contacted you to address the issue. Please let us know if there is anything else we can assist you with.
★★★★★
★★★★★
Lakedia D - July 31, 2018
Verified Purchase
It fits
Thank you for the part my washer is working now
★★★★★
★★★★★
Iris V - June 1, 2018
Verified Purchase
Great.
The part was good and work fine
★★★★★
★★★★★
Charles L - February 24, 2018
Verified Purchase
Easy repair. Part is working great
Got the part in 2 days. Did look up on how to change it out. All you have to do is take the brackets off the back, push the lid forward. Take off old latch, run the new wire through the clips. Take off the top back piece, remove the old connector and fish it out of the hole, and run the new connector. It took maybe 20-30 minutes.Have no trouble with it at all.
★★★★★
★★★★★
James C - January 26, 2018
Verified Purchase
Part worked
Part worked great! Unfortunately,still have prob.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer would not run or start when start button was pushed.
Based on, online troubleshooting and repair guide. First repair attempt was unsuccessful after replacing suggested parts and required a professional repair tech to diagnose the issue. Second attempt at repair was successful after the proper issue was diagnosed. Sometimes you just have to call a professional. John Suchinsky, Paterson NJ
Removed old striker ( 2 Phillips head screws ) replaced with new striker with the 2 screws and was done, easy fix...
John from Hale Center, Texas, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
8 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patty
April 28, 2018
The washer lid comes unlocked during drain and spin cycle so it does not completely drain and spin. I put the wash through the drain and spin cycle a second time and it works fine. This happens with every load of clothes I wash. What part do I need to replace? Thanks so much
For model number WTW5640XW1
Hi Patty, Thank you for the question.I suggest replacing the Lid Latch Assembly, PartSelect Number: PS3497627. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Trevor
August 14, 2017
The washer will turn on, lid locks and the motor sounds like its trying to start then it just sits there and flashes, the motor was just replaced and was running fine for about three loads before this happened.
For model number WTW5600XW2
Hi Trevor,
Thank you for your inquiry. It could be a couple of things. Have you tested your shift actuator to see if that part is also still functioning? Behind the front panel of your appliance, you should actually have a technical sheet that will list all of the electrical tests that you can do to your appliance to determine if the parts are working correctly. I would suggest going through those as well. It could be your shift actuator or your control board that is the problem. Good luck.
Need a new latch assembly. Is w10240513 the correct part number?
For model number DU945PWSQ0
Hello Kathie, thank you for inquiring. For your model the Door Switch Kit is part PS358749. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Teresa
July 2, 2019
What do codes F50 and F52 mean?
For model number WTW5640XW3
Hi Teresa,
Thank you for your question. The F50 error code is letting you know that the
motor rotor position sensor (RPS) senses no rotation. The F52 error code is letting you know that the motor rotor position sensor (RPS) senses rotation after a stop command. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Vern
October 9, 2019
I go to start washer red light comes on like it wants to start, but then the red light will blink several times and then the machine shuts down. If we try to start it several times it will finally start to run and works perfect then.
For model number MVWX600XW0
Hi Vern,
Thank you for your question. If the washer is not starting like it should, there are some parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=MVWX600XW0&mfgModelNum=&fkMfgID=1&ModelMasterID=869940&PID=40. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Vern
October 11, 2019
Washer will not start sometime. When you turn it on the red lite comes on and in a few seconds red lite starts to blink and waher shuts down,. Repeat start process and washer will finally start and run thru cycle. You may have to repeat start procedure several times before it will start.
For model number mvwx600xw0
Hi Vern, thank you for your question. There are a few parts that you could check. The parts to check first would be your lid switch. that is the most common part to cause issues. Other parts to check would be your shift actuator, and your capacitor as well. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ernesto
March 13, 2020
My washing machine fills up of water but does not wash or spin at all just drains the water.Need help.
For model number 110.20022013
Hello Ernesto, thank you for your question. We would suggest testing your lid latch assembly, to see if this part has failed. If this part shows no continuity, the lid latch mechanism would need to be replaced. We show this part on our website as PartSelect number PS3497627. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rex
July 6, 2021
My lid on the Kenmore 500 series closes but the machine will not start wash. I found a small plastic part the size of my small fingernail in the tub bottom. Lid will not latch. What is needed?
For model number 110.25102311
Hello Rex, Thank you for the question. We suggest checking the Lid Latch Assembly, PartSelect Number PS3497627. The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning. We hope this helps!
Washer will not lock lid. Replaced lid lock mechanismbut it still makes a buzzing noise when i push start button. Then sense light comes on and lid light keeps flashing. Should i try and replace striker?
For model number MVWC400XW2
Hi Pat, thank you for your question. You could take a look at it, yes. This part is a physical part so you should see damage that causes it not to work. If that is not the issue you might have to look into your control board being the issue. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Robert
November 11, 2021
Lid does not lock when closed to start wash cycle
For model number 110.27102310
Hello Robert, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS3497627. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
