This part releases the detergent and rinse aid into the dishwasher. This detergent dispenser is for dishwashers.
Detergent dispenser holds the dishwasher detergent in a covered compartment.
Unplug the dishwasher or shut off the house circuit breaker before installing this part. Wear work gloves to protect your hands during this repair.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Dishwasher Detergent and Rinse Aid Dispenser
Troubleshooting
This part fixes the following symptoms:
Will not dispense detergent | Door latch failure | Door won’t close | Not cleaning dishes properly
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David R - January 6, 2023
Verified Purchase
Easy repair
Wonderful service
★★★★★
★★★★★
Dennis J - November 3, 2021
Verified Purchase
Easy repair, great part!!
Part was in great condition when I recieved it!! Replaced the part and my dishwasher works like new! It's 8yrs old! Thank you!
★★★★★
★★★★★
Steve Z - May 9, 2021
Verified Purchase
Easy to do
The accompanying YouTube video made installation a snap. Could have done it without but much easier/quicker with.
★★★★★
★★★★★
Daniel Z - April 5, 2021
Verified Purchase
Whirlpool Dishwasher
The part w a perfect fit and works great.
★★★★★
★★★★★
Mark S - December 4, 2020
Verified Purchase
Works great
Installed easily, washer works like new again
★★★★★
★★★★★
Trent K - June 22, 2020
Verified Purchase
Very easy!
Smooth ordering process, fasT delivery, and VERY informative video, what more could you ask for?
★★★★★
★★★★★
Steven C - June 21, 2020
Verified Purchase
Easy as can be
The part went in easy. Took me 10-15 minutes. Works as it should.
★★★★★
★★★★★
Randy F - June 2, 2020
Verified Purchase
Replacement detergent dispenser
The part was exactly what I was looking for. I received it quick and the installation was a breeze.
★★★★★
★★★★★
Christopher A - May 24, 2020
Verified Purchase
Perfect fit
Exactly the part I needed. Arrived before expected, quickly. The installation video was spot on.
★★★★★
★★★★★
Damon M - February 19, 2020
Verified Purchase
Exactly what I needed
The part fit perfectly, installed easily and now I don't have to wait for the dishwasher to drain the prewash and then add soap for the wash. Saved me $600 dollars on a new dishwasher.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 12 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Change the detergent dispenser
Took out the old dispenser and replaced the new one
John L from WILBRAHAM, MA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The PartSelect video for making this repair was dated, not applicable.
PS11750654 Detergent and Rinse Aid Dispenser
I ignored the sizing of the drivers needed. Fortunately I have enough tools to adjust. The video was basically irrelevant; it did not show/explain the required steps to make this repair. The time I spent was in great part figuring out the work around due to the differences from the v
... Read moreideo shown and the actual layout.
Tell Steve that THE VIDEO NEEDS TO BE UPDATED!
Read less
Ernest from SAINT PAUL, MN
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
rinse liquid compartment leaking
replaced soap dispenser
janis from FORD CITY, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Detergent Dispenser would not stay closed
When we tried to get a repair person, we found most places were not even taking customers who didn't buy the appliance from them. Independent repair people reported month-long (or more) delays, so we decided to try it even though we are not exactly "handy" people. :-)
It was actually rather easy. We followed the video from the
... Read morePartSelect website and it guided us all the way through the process. It was helpful to have 2 people working together, especially when removing/replacing the front cover.
It's been a couple of weeks and it's still working!
Read less
MATT from ALLISON PARK, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
small plastic mechanism on soap dispenser broke
Replaced Soap Dispenser. Reviewing the video instructions provided by partselect.com I was able to do the job myself without much difficulty. Tools required for my Kenmore model were a little different except for that it was the same. Thank You.
Mark from MONTGOMRY VLG, MD
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
On the the lid of the dispenser a tiny tab that engages with a tiny bar that is supposed to hold the lid closed on the detergent until released by a solenoid at a certain time in the cycle. It allowed the lid to open prematurely.
I performed the repair exactly as shown in the online video site accessed by entering the url that came with the order. The video was correct in every aspect.
The tiny little tab on the new dispenser broke on the first use of the machine. Very weak part of the process. We will secure lid to the detergent by another means, wh
... Read moreich we had been doing for some time anyway. Can't afford another $75 plus shipping. Very weak design.
Read less
Don from OKLAHOMA CITY, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace the soap dispenser
It is VERY IMPORTANT that you watch the HOW TO VIDEO provided from the BEGINNING, then it will be VERY EASY to do. I took out ALL the screws, I DIDN'T need to do, so it took longer, & made things more difficult.
Mary Ann from DEFIANCE, MO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Detergent lid failed to stay closed
Watched your online video,and the rest was simple
Bob from SAN DIEGO, CA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
3 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dispenser would no longer lock
Watched the video from your web site. Extremely easy to follow and to complete the replacement!
Joseph from PHILADELPHIA, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace the whole dish soap dispenser
I switched off power to the dishwasher and unscrewed the front panel from the inside sides. Then, carefully removed the front by lifting up and off. I disconnected the signal wire by unclipping it from the detergent dispenser; it clipped in like a phone jack. Unscrewed the frame holding in the dispenser, then popped out the old dispenser,
... Read more popped in the new one, screwed on the frame, hooked the signal back in. Replaced the front, screwed it in, turned on power and ran a small quick wash to make sure it was working properly. It was!
Read less
Jessica from Plano, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
54 of 63 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
21 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ralph
August 24, 2017
Where are the helpful videos --dispenser will not stay closed troubleshoot
For model number DU1300XTVQ0
Hi Ralph,
Thank you for your inquiry. There are no videos for this particular part at the moment. However, it sounds like you will have to replace your dispenser as it is either and internal electrical problem in your part or the part is physically broken. Either way, you will have to replace the part. Good luck with your repair.
12 people found this helpful.
Was this helpful?
Thank you for voting!
Tony
November 29, 2017
Inside of the soap dispenser there is a rubber squared-like ring that prevents the detergent from leaking. It is missing. Do I need to replace the whole soap dispenser because of this small part?
For model number DU1055XTSS2
Hello Tony,
Thanks for your question. The seal is not available as a separate part and you would require a new detergent dispenser to obtain that part.
I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Julia
December 27, 2017
I have a Whirlpool that starts well and i hear the water running and such. However, it doesn't move past a certain point to actually open up the soap compartment and complete the cycle. I ended up cancelling the process and it drained completely. So i don't think it's a plumbing issue.
For model number DU1055XTVQ8
Hi Julia,
Thank you for your question. The problem will most likely be with either your detergent dispenser or your electronic control board. More than likely your dispenser if all of the other functions in your dishwasher are working perfectly fine. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
July 31, 2018
Replaced the soap/rinse aid dispenser the soap portion is working fine but the rinse aid only worked for a short period. Any suggestions as to what may be preventing the rinse aid portion from dispensing. Have tried all settings 1 through 6
For model number DU1055XTPS4
Hi Greg,
Thank you for your question. The detergent dispenser is designed to release detergent into the dishwasher tub during the wash cycles and will typically have two compartments, an unsealed compartment for prewash and a sealed compartment for the main wash cycle. Verify that the dispenser is not simply clogged with caked on detergent and give it a good cleaning if necessary. Also check to make sure that the cover for the dispenser will open easily and is not damaged or broken. Check the release mechanism for worn or defective parts and replace if necessary. The rinse aid dispenser is designed to release rinse aid into the tub during the rinse cycle. Verify that the dispenser is full and is not clogged with detergent and verify that the cap is adjusted properly. The dispensers may be operated by either a mechanical devise or by a bi-metal release or wax motor devise. Also, The rinse aid cap could be the reason why your dishwasher is not releasing rinse aid. The rinse aid dispensing cap is located on the inner door panel of your dishwasher. The rinse aid cap could be loose and may just need to be refitted, but could also be warped or damaged from the heat of the water in the dishwasher. Remove the cap from the door and inspect it for signs of melting or warping and replace if need be. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Rick
May 29, 2019
Latch broken on soap dispenser, door will not shut to hold soap, can you give me part number?
For model number DU1055XTVS0
Hello Rick, thank you for inquiring. This Detergent and Rinse Aid Dispenser part PS11750654 is the replacement for your model.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Baron
June 18, 2019
Can i get the round plug for the rinse aid dispencer ?
For model number GU2400XTPQ7
Hello Baron, thank you for inquiring. For your model the Rinse Aid Cap is part PS11746426.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Carmen
September 12, 2019
My serial # is f206254306. The dispenser on my dishwasher does not look like this. It has a small latch that swings up to hold the door closed, and the latch broke off. Will the one shown above still fit my dishwasher? Thanks.
For model number WDF510PAYS2
Good Day Carmen. Thank you for your question in regards to your unit (Model Number WDF510PAYS2). Based on our research the part number for the part that is compatible with your unit is PS11750654. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jonathan
January 24, 2020
Do you have just the gasket that goes around the soap port?
For model number W10224428
Hi Jonathan. Sadly the gasket is not sold separately. Thank you for your question and good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Maria
March 22, 2023
The door of the detergent dispenser does not close. Is there some thing to try before changing the part? If not, is this fairly easy to change? Thank you.
For model number DU1300XTVT2
Hello Maria, thank you for contacting us. Based on our research, there is a lock that is used to hold the door. If that lock is broken or not holding the door, you may need to replace the detergent and rinse aid dispenser, part number PS11750654. We are providing you with a relevant video that will help you in replacing the dispenser. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terri Dorr
February 26, 2018
Hi. Is there a simple check to find out why soap dispenser won’t release. Before we buy a new part also this dishwasher is 8 years old is it worth the investment n time
For model number DU1055XTPS4
Hi Terri,
Thank you for your question. The detergent dispenser is designed to release detergent into the dishwasher tub during the wash cycles and will typically have two compartments, an unsealed compartment for prewash and a sealed compartment for the main wash cycle. Verify that the dispenser is not simply clogged with caked on detergent and give it a good cleaning if necessary. Also check to make sure that the cover for the dispenser will open easily and is not damaged or broken. Check the release mechanism for worn or defective parts and replace if necessary. The rinse aid dispenser is designed to release rinse aid into the tub during the rinse cycle. Verify that the dispenser is full and is not clogged with detergent and verify that the cap is adjusted properly. The dispensers may be operated by either a mechanical devise or by a bi-metal release or wax motor devise. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
