Whirlpool/Whirlpool_Thumb/CTB0GDZQ.gif
See part 6 in the diagram
Replacing your Whirlpool Dishwasher Detergent and Rinse Aid Dispenser play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Detergent and Rinse Aid Dispenser

★★★★★
★★★★★
19 Reviews
$68.56   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11750654
Manufacturer Part Number WPW10224428
Manufactured by Whirlpool
Product Description

Detergent and Rinse Aid Dispenser Specifications

This part releases the detergent and rinse aid into the dishwasher. This detergent dispenser is for dishwashers. Detergent dispenser holds the dishwasher detergent in a covered compartment. Unplug the dishwasher or shut off the house circuit breaker before installing this part. Wear work gloves to protect your hands during this repair.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not dispense detergent | Door latch failure | Door won’t close | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, Estate, Inglis.
Part# WPW10224428 replaces these:
AP6017357, 8565814, 8565816, W10195169, W10224428, WPW10224428VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

19 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ralph
August 24, 2017
Where are the helpful videos --dispenser will not stay closed troubleshoot
For model number DU1300XTVQ0
Hi Ralph, Thank you for your inquiry. There are no videos for this particular part at the moment. However, it sounds like you will have to replace your dispenser as it is either and internal electrical problem in your part or the part is physically broken. Either way, you will have to replace the part. Good luck with your repair.

12 people found this helpful.

Was this helpful?
Thank you for voting!
Tony
November 29, 2017
Inside of the soap dispenser there is a rubber squared-like ring that prevents the detergent from leaking. It is missing. Do I need to replace the whole soap dispenser because of this small part?
For model number DU1055XTSS2
Hello Tony, Thanks for your question. The seal is not available as a separate part and you would require a new detergent dispenser to obtain that part. I hope this helps.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Julia
December 27, 2017
I have a Whirlpool that starts well and i hear the water running and such. However, it doesn't move past a certain point to actually open up the soap compartment and complete the cycle. I ended up cancelling the process and it drained completely. So i don't think it's a plumbing issue.
For model number DU1055XTVQ8
Hi Julia, Thank you for your question. The problem will most likely be with either your detergent dispenser or your electronic control board. More than likely your dispenser if all of the other functions in your dishwasher are working perfectly fine. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Greg
July 31, 2018
Replaced the soap/rinse aid dispenser the soap portion is working fine but the rinse aid only worked for a short period. Any suggestions as to what may be preventing the rinse aid portion from dispensing. Have tried all settings 1 through 6
For model number DU1055XTPS4
Hi Greg, Thank you for your question. The detergent dispenser is designed to release detergent into the dishwasher tub during the wash cycles and will typically have two compartments, an unsealed compartment for prewash and a sealed compartment for the main wash cycle. Verify that the dispenser is not simply clogged with caked on detergent and give it a good cleaning if necessary. Also check to make sure that the cover for the dispenser will open easily and is not damaged or broken. Check the release mechanism for worn or defective parts and replace if necessary. The rinse aid dispenser is designed to release rinse aid into the tub during the rinse cycle. Verify that the dispenser is full and is not clogged with detergent and verify that the cap is adjusted properly. The dispensers may be operated by either a mechanical devise or by a bi-metal release or wax motor devise. Also, The rinse aid cap could be the reason why your dishwasher is not releasing rinse aid. The rinse aid dispensing cap is located on the inner door panel of your dishwasher. The rinse aid cap could be loose and may just need to be refitted, but could also be warped or damaged from the heat of the water in the dishwasher. Remove the cap from the door and inspect it for signs of melting or warping and replace if need be. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Rick
May 29, 2019
Latch broken on soap dispenser, door will not shut to hold soap, can you give me part number?
For model number DU1055XTVS0
Hello Rick, thank you for inquiring. This Detergent and Rinse Aid Dispenser part PS11750654 is the replacement for your model.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Baron
June 18, 2019
Can i get the round plug for the rinse aid dispencer ?
For model number GU2400XTPQ7
Hello Baron, thank you for inquiring. For your model the Rinse Aid Cap is part PS11746426.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Carmen
September 12, 2019
My serial # is f206254306. The dispenser on my dishwasher does not look like this. It has a small latch that swings up to hold the door closed, and the latch broke off. Will the one shown above still fit my dishwasher? Thanks.
For model number WDF510PAYS2
Good Day Carmen. Thank you for your question in regards to your unit (Model Number WDF510PAYS2). Based on our research the part number for the part that is compatible with your unit is PS11750654. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jonathan
January 24, 2020
Do you have just the gasket that goes around the soap port?
For model number W10224428
Hi Jonathan. Sadly the gasket is not sold separately. Thank you for your question and good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Terri Dorr
February 26, 2018
Hi. Is there a simple check to find out why soap dispenser won’t release. Before we buy a new part also this dishwasher is 8 years old is it worth the investment n time
For model number DU1055XTPS4
Hi Terri, Thank you for your question. The detergent dispenser is designed to release detergent into the dishwasher tub during the wash cycles and will typically have two compartments, an unsealed compartment for prewash and a sealed compartment for the main wash cycle. Verify that the dispenser is not simply clogged with caked on detergent and give it a good cleaning if necessary. Also check to make sure that the cover for the dispenser will open easily and is not damaged or broken. Check the release mechanism for worn or defective parts and replace if necessary. The rinse aid dispenser is designed to release rinse aid into the tub during the rinse cycle. Verify that the dispenser is full and is not clogged with detergent and verify that the cap is adjusted properly. The dispensers may be operated by either a mechanical devise or by a bi-metal release or wax motor devise. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Darlene
October 18, 2019
The door for the soap dispenser won’t stay closed because the latch is broken. Can I just replace the latch or do I have to replace the whole part for the soap dispenser ?
For model number DU1055XTSQ2
Hello Darlene, Thank you for the question. Very sorry but the parts tot he dispenser are not sold separate from the dispenser PartSelect Number PS11750654 so it will need to be replaced. Hope this helps!

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Whirlpool Dishwasher Detergent and Rinse Aid Dispenser

Replacing your Whirlpool Dishwasher Detergent and Rinse Aid Dispenser play video
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 8 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    dispenser didn't stay closed
    Ordered new part and installed it. I found a repair manual online and the replacement was pretty easy. I removed 8 screws that held the outer door and the dispenser was sitting there looking at me. I disconnected the solenoid, pried apart two clips and the old dispenser came right out. Reversed the process to install the new one.
    • Burt from Richardson, TX
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Screw drivers
    • Parts Used:
      WPW10224428
    126 of 136 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Needed to replace the whole dish soap dispenser
    I switched off power to the dishwasher and unscrewed the front panel from the inside sides. Then, carefully removed the front by lifting up and off. I disconnected the signal wire by unclipping it from the detergent dispenser; it clipped in like a phone jack. Unscrewed the frame holding in the dispenser, then popped out the old dispenser, popped in the new one, screwed on the frame, hooked the signal back in. Replaced the front, screwed it in, turned on power and ran a small quick wash to make sure it was working properly. It was!
    • Jessica from Plano, TX
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    • Parts Used:
      WPW10224428
    53 of 62 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    detergent dispenser not opening during the wash cycle
    remove front door outer cover,remove the hex screws holding the dispenser.unplug the wire to the dispenser and remove.replace with the new dispenser, fasten with hex head screws and plug in the wire. make sure you put the vinyl flap back in place. close front door cover and fasten.
    • Robert from Haskell, NJ
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver
    • Parts Used:
      WPW10224428
    28 of 36 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    dispenser would no longer lock
    Watched the video from your web site. Extremely easy to follow and to complete the replacement!
    • Joseph from PHILADELPHIA, PA
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Nutdriver
    • Parts Used:
      WPW10224428
    4 of 4 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    On the the lid of the dispenser a tiny tab that engages with a tiny bar that is supposed to hold the lid closed on the detergent until released by a solenoid at a certain time in the cycle. It allowed the lid to open prematurely.
    I performed the repair exactly as shown in the online video site accessed by entering the url that came with the order. The video was correct in every aspect.

    The tiny little tab on the new dispenser broke on the first use of the machine. Very weak part of the process. We will secure lid to the detergent by another means, which we had been doing for some time anyway. Can't afford another $75 plus shipping. Very weak design.
    • Don from OKLAHOMA CITY, OK
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    • Parts Used:
      WPW10224428
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Replace the soap dispenser
    It is VERY IMPORTANT that you watch the HOW TO VIDEO provided from the BEGINNING, then it will be VERY EASY to do. I took out ALL the screws, I DIDN'T need to do, so it took longer, & made things more difficult.
    • Mary Ann from DEFIANCE, MO
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Socket set
    • Parts Used:
      WPW10224428
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Detergent lid failed to stay closed
    Watched your online video,and the rest was simple
    • Bob from SAN DIEGO, CA
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      15 - 30 mins
    • Parts Used:
      WPW10224428
    2 of 5 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    small plastic mechanism on soap dispenser broke
    Replaced Soap Dispenser. Reviewing the video instructions provided by partselect.com I was able to do the job myself without much difficulty. Tools required for my Kenmore model were a little different except for that it was the same. Thank You.
    • Mark from MONTGOMRY VLG, MD
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Socket set
    • Parts Used:
      WPW10224428
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      19 Reviews
      4.7
      Filter By Rating:
      • 5 Stars
        17
      • 4 Stars
        1
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        1
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11750654
      Manufacturer Part Number: WPW10224428
      Brand
      Model Number
      Description
      Kenmore
      66513222K600
      Dishwasher
      Kenmore
      66513222K601
      Dishwasher
      Kenmore
      66513223K600
      Dishwasher
      Kenmore
      66513223K601
      Dishwasher
      Kenmore
      66513229K600
      Dishwasher
      Kenmore
      66513229K601
      Dishwasher
      Kenmore
      66513452K900
      Dishwasher
      Kenmore
      66513452K901
      Dishwasher
      Kenmore
      66513452K902
      Dishwasher
      Kenmore
      66513453K901
      Dishwasher
      Kenmore
      66513453K902
      Dishwasher
      Kenmore
      66513459K900
      Dishwasher
      Kenmore
      66513459K901
      Dishwasher
      Kenmore
      66513459K902
      Dishwasher
      Kenmore
      66513462K900
      Dishwasher
      Kenmore
      66513462K901
      Dishwasher
      Kenmore
      66513462K902
      Dishwasher
      Kenmore
      66513462K903
      Dishwasher
      Kenmore
      66513463K900
      Dishwasher
      Kenmore
      66513463K901
      Dishwasher
      Kenmore
      66513463K902
      Dishwasher
      Kenmore
      66513463K903
      Dishwasher
      Kenmore
      66513469K900
      Dishwasher
      Kenmore
      66513469K901
      Dishwasher
      Kenmore
      66513469K902
      Dishwasher
      Kenmore
      66513469K903
      Dishwasher
      Kenmore
      66513472K900
      Dishwasher
      Kenmore
      66513472K901
      Dishwasher
      Kenmore
      66513472K902
      Dishwasher
      Kenmore
      66513473K900
      Dishwasher

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service