Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ralph
February 3, 2020
The spring on my ice dispenser on the door is weak and allows warm air to get into the ice cube drop causing the ice to melt ,jamming the dispenser. Can i replace the spring or the device that keeps the door shut tight
For model number Gs5vhaxwboo
Hello Ralph, thank you for your question. If the door is in good condition, you should only have to replace the spring, which is Torsion Spring Part #: PS11750653. You can also get the spring in a kit with the door which is Part #: PS11723180. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 3 reviews.
What's this?
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice Door broken letting warm air into Ice Maker system which kept freezing up.
I didn't have to buy a new Ice door kit. The part on the Refrig. door I needed I found out was unavailable. The door parts (Ice door parts and the asembly for the water unit) screws into that part. I found out that I would have to replace the whole refrig. door which was $900.00. I took every apart got me some pvc glue used it on the door and bought the original screw online with some other assorted parts,Door switch, etc. and was able to repair in about an hour. Some of the parts are very fraigle so you have to be very careful or you will be buying some new replacement parts.The new nickel and dime parts are expensive. My Icemaker was leaking where the Ice was clumping together in the bin, and when I checked the unit was $125.00. I found a new one and replaced it for about half that price. I am now very happy! (a least until the next project.)
Unpluged the unit and removed the front trim ring. removed the old parts and installed the new parts. in reverse order. it took about 12 hour but the dispenser to work but seems to work fine now.
jad to fix the mount fire the pin and install a new pin and spring
I started by using some superglue to reattach the broken mounting ring for the pin above the ice door flap. Wait a few minutes for the glue to set (I waited about 2 hours.) After that, install the pin and spring with the spring legs facing the door flap mount and the arch on top. Angle it so the freezer door apply pressure to the spring arch then slot the pin into the circular mount you just glued on the left and the retaining slot on the right.
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout