This water inlet valve supplies the water needed to both the water dispenser and the ice maker. A block in the valve could be what is keeping your machine from properly dispensing water, or making ice. Before you decide to replace this part, turn the household water supply to this valve off, and remove the input tubing to see if it is clogged. If so, clear the blockage to allow water back into the ice machine. If the ice maker is still not working properly, you may need to replace the water inlet valve. Remember to disconnect the power and water supply to your refrigerator before beginning this repair.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Ice Maker.
This part works with the following products:
KitchenAid, Whirlpool, Jenn-Air, Kenmore.
Part# WPW10217917 replaces these:
AP6017258, 2313741, W10159841, W10217917
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
G. Wayne C - January 30, 2018
Verified Purchase
Inlet valve
Part worked fine and was easy to install.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Valve needed replacement - ice had become very thin
Just install the new valve by reversing the process of removing the old valve. Only possible nance is with the quick release hose fittings - the collar is pushed down to release the hose. Also, be sure to FULLY reinsert the hose in the new valve. Best to twist the hose a bit when inserting so it goes through the o-ring inside the valv
... Read moree. If not fully inserted, it will leak.
Read less
Mark from RICHMOND, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water leaking from water control board.
After turning off water to icemaker, defective control removed (two screws) and new unit installed.Worked perfectly.I was totally amazed when I ordered the part thursday afternoon and it arrived fridaY morning.Total time out of operation less than 24 hours.Wonderful results.
otis from frenchburg, KY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
0 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking water inlet valve
Received replacement valve ~ 3 days, easily replaced in less than 15min, works great
Barton from Ringgold, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
4 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water inlet valve was leaking and damaged the circuit
just replaced the water inlet valve, it took less than 10 minutes. Ordering the part was just as simple, no hassle what so ever. Got the part as promised and installed it in minutes just as it was explained. I will come back to this site in a hart-beat.
Thanks
Hugohug from LAREDO, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
14 of 28 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freeze ruptured inlet valve
Simple to replace. Next fall I will be sure to drain the outdoor icemake and shut it down for the winter.
Lindey from Austin, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
7 of 24 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
April 12, 2019
Does the water inlet valve assembly include the circuit board?
For model number KUIS18NNTB0
Hi Mark,
Thank you for your question. The electronic control board is sold separately from the water inlet valve. The part number listed under your model number for the electronic control board is PS11748974. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gerald
September 28, 2017
How do you disconnect the inlet and outlet water lines from this part?
For model number WPW10217917
Hi Gerald,
Thank you for your inquiry. There is a video on our website that you may reference on how to disconnect the lines from the water inlet valve. You will find the video under part number PS3497634. I hope this helps. Thank you and have a great day!
There is a plastic cover that snaps onto the water inlet valve ( part number wpw10217917), mine is cracked and is causing my ice maker to leak. Can you send me the part number to this cover? The model number of my ice machine is kuis15nrtb1.
For model number KUIS15NRTB1
Hi Sonya, Thank you for the question. The plastic housing or cover is not sold separately from the valve its self so the valve will need to be replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ulises
January 4, 2019
Como saber si mi válvula no sirve o es la tarjeta la que no le manda la señal ya que mi válvula no se activa
Hola Ulises, gracias por contactarnos. Para que podamos ubicar las piezas correctas y la información de reparación, necesitaremos el número de modelo de la unidad. Una vez que haya localizado el número de modelo, no dude en volver a enviar la pregunta y estaremos encantados de ayudarle. ¡Esperamos escuchar de usted!
Was this helpful?
Thank you for voting!
Robert
January 18, 2019
I didn't remove the water valve but got the new one but not sure where the incoming water line pushed into the valve. There's one hole at the top and one at the bottom.Thank you.
For model number KVIS18NNTWO
Hi Robert,
Thank you for your question. There is one of our videos on YouTube that you may reference on how to install the water inlet valve. The refrigerator and the water inlet valve in the video may not show exactly like the one you have, but it will give you a general idea on how to install the part. Here is a link to the video, https://www.youtube.com/watch?v=eNGe_VUDIBA. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Kandi
December 6, 2017
I need to replace the inlet tubing that runs from water inlet valve to the back of the unit and where you insert the tube from the water source. It is a hard gray tubing that pops into the bottom of the inlet valve ...but i'm not sure which one it is in the diagram.
For model number KUIC15NLTS1
Hi Kandi,
Thank you for your question. I have listed that part in a link down below for you. I hope that helps. Good luck with your repair.
My ice maker is not receiving enough water to make ice. If i fill the water trough it will make ice as normal. It just doesn't fill enough water by itself. Would that be the fill valve or is there a fill sensor?
For model number KUIC18NNTS2
Hi Bryan,
Thank you for your question. If the ice maker is not receiving enough water to make ice, you will need to check the water fill tubes, the water inlet valve, the water filter, the water pump assembly and the ice maker. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Bob
June 24, 2019
Leaking water out of where the supply line enters the valve. Ideas?
For model number JIM158XBCX1
Hello Bob, Thank you for the question. If the lines so not have damage then the valve, PartSelect Number: PS11750553 will need to be replaced. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
