Lint Filter WPW10215093

Hello Sam, Thank you for the question. The filter is under the basket in the bottom of the outer tub assembly. You will need to remove the basket and agitator to get to the filter. The filter is held in place by screws. Thank you for your inquiry, good luck with this repair!

Hello Dave, Thank you for the question. I suggest removing and cleaning the Water Pressure Hose, PartSelect Number PS11741846. This is the hose that tells your appliance if your tub is at the desired water level and can get a build up over time and will not fill tot he proper level. Hope this helps!

Hi Michael, Thank you for your question. The lint filter is located under the basket in the bottom of the outer tub assembly. To access the lint filter, you will need to remove both the agitator and the basket. The lint filter is held in place by a couple of screws. We hope this helps! If you have any questions, please let us know.

Hi Tricia, Thank you for your question. Based on your description, it sounds like you are referring to the screens on the water inlet valve. The screens are not sold separately and are only sold with the water inlet valve. The part number listed under your model number for the water inlet valve is PS12349267. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Hi Eileen, Thank you for your question. The part number listed under your model number for the lint filter is PS11750500. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Hello Mike, thank you for contacting us. The lint filter, part number PS11750500, is located at the outer tub inlet near the pump. We hope that helps!

Hello Donna, the cold water valve for this unit is PartSelect Number: PS12348073. We do not provide service, but the installation of this part is not difficult for a do-it-yourself-er. Please enter the part number into the site for current price and availability. Good luck with your repair!

Hello Allison, thank you for contacting us. This part does not come with instructions on how to remove the basket and agitator. Your model contains a lint filter, part number PS11750500, under the spin basket. 1: First, you have to take up the lid. There are two lock clips under the top panel. Now, grab the front panel from the lid lock and slide the top panel to the forward position. 2: Remove the agitator by removing the bolt. 3: Remove the tub cover by unhooking all the locks. 4: Remove the spanner nut that is holding the spin tub. 5: Remove the inner basket, and you get access to the lint filter. We hope this helps, good luck with this repair!

Hello Doug, thank you for reaching out. According to our research, this issue arises when the drain hose is clogged. A clogged drain hose prevents water from properly flowing down the drain pipe resulting in a backup of water, which has nowhere to go but onto your laundry room floor. We would suggest cleaning the drain hose. If this does not resolve your issue, then you may need to replace the drain pump, part number PS11770076. We hope this solves your problem!

Hello Cindi, thank you for contacting us. Yes, your model contains a lint filter, part number PS11750500, under the spin basket. We are providing instructions that will help you clean the lint filter. 1- Remove the top assembly by sliding it forward. 2- Remove the agitator by removing the bolt. 3- Remove the tub cover by unhooking all the locks. 4- Remove the spanner nut that is holding the spin tub. 5-Remove the inner basket, and you get access to the lint filter. We hope this helps, good luck with this repair!