Water inlet valve controls the water flow into the washer.
Fits some washers in the following series: Kenmore 110; Whirlpool CHW, WFW and YWFW; Maytag CHW, MHN, MHP, MHWE, MHWZ and YMHWE; Amana NFW and YNFW; and Inglis IFW and YIFW.
Also fits some laundry centers in these series: Whirlpool CET and CGT; and Maytag MLE and MLG.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Washer Dual Cold Water Valve
Troubleshooting
This part fixes the following symptoms:
Leaking | No hot or cold water | Water Filling Issues
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag, Whirlpool, Inglis, Amana.
Part# WPW10212596 replaces these:
AP6017174, W10212596, WPW10212596VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
11 Reviews
4.9
Filter By Rating:
5 Stars
10
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ngan-Nha V - June 28, 2021
Verified Purchase
What I needed for my LF error.
My whirlpool washer (WFW9151YW00) would trigger a LF error message during cold or warm wash. There were no issues during hot only wash. Cold water would fill my tub but not enough. There was no debris blocking the cold water filter.
Replacing the water valve solved the issue.
★★★★★
★★★★★
Brenda G - July 7, 2020
Verified Purchase
Shipped promptly, easy repair, everything worked as expected.
No complaints, watched youtube video, simple repair, machine is working great.
★★★★★
★★★★★
Marnette A - October 19, 2019
Verified Purchase
We did it ourselves!
The part was ordered correctly and when installed, fixed our problem.
★★★★★
★★★★★
Eric G - January 10, 2019
Verified Purchase
Great Product
Easy to install and work right off the box. PartSelect ship the product fast and even sent a link on how to install the product. A++
★★★★★
★★★★★
Frank D - December 28, 2018
Verified Purchase
Exact fit
Part was exact fit for old one. Perfect.
★★★★★
★★★★★
Deborah S - November 22, 2018
Verified Purchase
MY WASHER WORKS!!!
We ordered a water inlet valve. It came and my husband put it on. Easy job . It works and mama is very happy. Thank you so,so much.
★★★★★
★★★★★
Chandler's S - November 10, 2018
Verified Purchase
Easy transaction!
Good website, clear parts illustrations, fast shipping, and its the right part, factory quality!
★★★★★
★★★★★
Ronald W - September 11, 2018
Verified Purchase
Exactly as advertised
Quick delivery. The installation video was a big help. Washer is working fine now.
★★★★★
★★★★★
Mark S - August 2, 2018
Verified Purchase
Washing machine repair.
Having typed in the model number and part needed, your website showed me the right valve. Ordered, delivered in two days. 45 minutes later we were washing clothes again!
★★★★★
★★★★★
Patricia B - July 18, 2018
Verified Purchase
Cold water valve
Fast service.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Leaky inlet valve
Removed the top cover of the washer, unclamped the intake hoses from the valves and unplugged their control wires, unscrewed the old valves and removed them from the case, screwed on the new valves, replugged the wires, reclamped the hoses, fastened the top back on.
Washer would fill extremely slowly when on cold water wash resulting in long fill(LF) error code.
The washing machine would only run on the hot water cycle. When trying to use the warm or cold setting, the water would dribble into the drum and result in an LF error code(long fill). I watched a brief video on replacing the water inlet valve which made it really easy to repair. I first turned off the water, disconnected the hoses from t
... Read morehe machine, and opened the top to access the valves. I then disconnected the wires from the valve, removed the water tubes, swapped out the valves and put everything back together. I am not experienced in repair but this was a very easy fix! We decided to replace the single hot water valve and the dual cold water valve since it's an older machine and it works like new again!
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Andrew
September 23, 2019
Narrow down lf error tip. Lf only on cold wash - rinse is ok (or vice versa for cold)? Verify by pulling dispenser tray and watch for flow, if any. If little or none suspect dual cold valve; less likely, pinched or obstructed tube or nozzle. No need to even check shutoff, hose or inlet filter. Order the part! :)
For model number WPW10212596
Hi Andrew,
Thank you for your question. The LF error code means that the washer will not fill with water. If your washer is not filling with the cold water, the issue is likely the water inlet valve, but there are some other parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/Repair/Washer/No-Hot-Cold-Water/. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ronald
July 8, 2019
Sorry, gave you wrong model #. Will not dispense fabric softener.
For model number WFW9150WW00
Hello Ronald, thank you for your question. The first step most manufacturer's recommend is to remove the top of the unit, and disassemble the hoses and the dispenser drawer. Most times, the dispenser, housing, and the hoses and inlet nozzles need a good cleaning. Soap and fabric softener builds up inside the unit and it will not dispenser properly. If those areas are clean, we would recommend testing the water valves that are attached to the back of the dispenser. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Nino
June 10, 2019
Whirlpool duet front loader: Ywfw9151yw00
Hi there i have a Whirlpool washer front load, water dispenses properly for detergent and fabric softener, but not the bleach area, no water being dispensed so the siphon will not activate itself.
tray is fine tested in sink and works properly.
any ideas what can be the problem.
For model number YWFW9151YW00
Hello Nino, thank you for inquiring. You will want to replace the Bleach/Softener Siphon part PS11746274 for your model.
Was this helpful?
Thank you for voting!
Wanda
March 18, 2024
INTIALLY WHEN THE WASHER QUIT... IT STARTED BEEPING AND IT WOULD NOT DRAIN .. COULD IT BE DOOR LATCH ASSEMBLY OR TEMP SENSOR
For model number YNFW7300WW00
Hello Wanda, thank you for reaching out. You will need to replace the motor control board, part number PS11755968, to fix the issue. Good luck with your repair!
