This insulation is also known as oven wrap insulation, and is used in conjunction with your range. Its purpose is to be installed in between the oven and the cabinets that surround it. This will help prevent the heat from escaping while cooking and essentially keep it locked inside the oven. The most common reason for needing to replace the insulation in your oven is that it becomes a comfy place for vermin to nest. Before making this installation, it would be best to disconnect the electrical power to your appliance, and to make sure that your range is cool to the touch.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rosanna
October 16, 2019
Hi, I’m looking for oven insulation for my oven door, in between the inner glass. I opened it up to clean the inner glass and the white insulation was wet and dirty so I’m looking to replacement it. I would really appreciate your help with this matter. Thank you.
For model number JGBS18DEN5WW
Hello Rosanna, Thank you for the question. I looked up the Manufacturer Part Number WB35K10151 and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Angela
November 30, 2022
What are the dimensions of this insulation?
For model number WFE520S0FS1
Hello Angela, thank you for reaching out. The dimensions of this insulation are: 70" x 20". We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jim
February 2, 2023
Is this enough to wrap the upper and lower oven boxes?
For model number KERS507XSS
Hi Jim,
Thank you for your question. Yes, this should be enough to go over the top and sides of the ovens. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
February 28, 2019
Does this insulation wrap include under the oven
For model number wfe540hoes
Hi John,
Thank you for your question. This insulation is also known as oven wrap insulation, and is used in conjunction with your range. Its purpose is to be installed in between the oven and the cabinets that surround it. This will help prevent the heat from escaping while cooking and essentially keep it locked inside the oven. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Adam
September 10, 2019
So this is the wrap that goes up one side, across the top and down the other side? May i ask the width and length of the piece?
For model number Kenmore elite gas range. Free standing
Hi Adam, We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Christopher
October 12, 2022
I need the insulation for the bottom and around the top of over the back insulation is good
For model number Wfe320m0js0
Hi Christopher,
Thank you for your question. The part number listed under your model number for the insulation is PS11750415. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Angela
November 30, 2022
Will this work with my model number??
For model number WFE520S0FS1
Hi Angela,
Thank you for your question. Yes, this would be the correct insulation for your range. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
Part Videos
Replacing your Whirlpool Range Insulation
Customer Repair Stories
Average Repair Rating: 2.5 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
mice had made nests in the insulation wrap in the range
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Wendy from Red Hook, NY
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
86 of 111 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.4
Filter By Rating:
5 Stars
3
4 Stars
4
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Karen L - December 1, 2021
Verified Purchase
Exactly what I needed
The part was just as described and arrived very fast.
★★★★★
★★★★★
Diana B - July 29, 2021
Verified Purchase
Repair went well
The part was in good condition. I removed the old mouse nested insulation, cleaned with natures miracle then installed the new insulation. Pretty easy. Had to cut off some extra. Oven works now with no bad smell.
★★★★★
★★★★★
Bernie D - March 11, 2019
Verified Purchase
Ordered two, needed both
I ordered one for the range and one for over the dishwasher. Turns out my model oven used two insulating pads. One over the top/down the sides and one down the back/under the bottom. I didnt see my model listed, so I can't be upset. I just used them both in the oven and had it back in service in under an hour.
★★★★★
★★★★★
Gregory S - January 28, 2019
Verified Purchase
fits like a glove
Easy install!
★★★★★
★★★★★
Lagrand I - January 24, 2019
Verified Purchase
Worked great
The part came fast and was working in 1 hour
★★★★★
★★★★★
Chad W - December 4, 2018
Verified Purchase
As expected
The part was in great condition and fit as expected.
★★★★★
★★★★★
Chad S - May 10, 2018
Verified Purchase
Exactly What I Needed
Part ordered is the top and side insulation. Fit fine. One side of the insulation was thicker than the other.. appeared to be matted differently. House has not burned down, so I guess it's okay. Shipping took about a week.
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750415
Manufacturer Part Number: WPW10208653
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
