Whirlpool/Whirlpool_Thumb/PWEWH1AX.gif
See part 7 in the diagram
Replacing your Whirlpool Wall Oven Bake Element play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Bake Element

★★★★★
★★★★★
44 Reviews

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11750369
Manufacturer Part Number WPW10207397
Manufactured by Whirlpool
Product Description

Bake Element Specifications

The bake element is located at the bottom of the oven and gives off heat in order to bake evenly. If you notice that the element is not heating up or is not cooking evenly, it could be because it is broken or burnt out. All you need for this simple repair is a small screwdriver. To complete this repair, you will need to first turn the oven off (or shut off the house circuit breaker), remove the two screws that are holding the old element in place, remove the two wires from the old part, and then connect them to the new part and screw back into place.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly
This part works with the following products:
Wall Oven, Microwave Oven Combo, Range.
This part works with the following products:
Whirlpool, Maytag, KitchenAid.
Part# WPW10207397 replaces these:
AP6017074, 4448696, 4452153, 9760766, W10207397
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

13 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jody
February 19, 2018
The oven reads f3 when turned on and will not heat up
Ho Jody, Thank you for the question. The F3 Error code indicates the Temperature Sensor will need to be replaced. Hope this helps!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Tom
February 16, 2018
What is the amperage or wattage rating of this part?
Hi Tom, Thank you for the question.Very sorry but I do not have the watts of this element. We just have each terminal is 120 Volts. Hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Mitch
October 30, 2019
Does this element fit my rf387pxpn0?
For model number RF387PXPN0
Hello Mitch, thank you for your question. The bake element for this unit is actually Part #: PS11740695. Please enter the part number into the site for current price and availability. Good luck with your repair!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Rose
April 12, 2019
I asked a question before but did not include the #9 with the model#. The oven does get hot, however biscuits, corn bread, pizza these do not get cooked on the bottom of these items. Also it takes twice as long to fully cook fish, meat and veggies. Thank you.
For model number RBS275PBD9
Hi Rose, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Mary
September 9, 2021
I have a 5 Star oven. The electric element cracked. I am trying to find a replacement but don't see that brand listed anywhere with replacement parts. Will another brand work or is there a universal oven heating element?
Hi Mary, Thank you for your question. If you could resubmit your question with the model number from your range, we would be happy to help you with this. Here is a link from our website on where you will find model number, https://www.partselect.com/Find-Your-Range-Model-Number.aspx. We hope this helps! If you have any questions, please let us know.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Carlos
July 30, 2021
Are this parts exchanchangeable in all whirpool ranges
Hello Carlos, Thank you for your question. The parts are not interchangeable within all Whirlpool Ranges. You will need to find the specific model number on your range to locate the correct parts list to fit your range. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Rege
February 4, 2020
The knob for the gas burner broke the small metal connector to the manifold. All i need is a small metal connector, the knob itself is good. Where can i buy the part? I don't know where purchased.
For model number Wfg361lvb1
Hello and thank you for writing. If the knob is ok you would have to replace the burner valve itself PS11747196 (center and left rear). The knob would fit directly on the d shaped shaft of the burner valve. We hope this helps. Please contact us anytime if you require further assistance.

Was this helpful?
Thank you for voting!
Related Parts:
Celia
July 13, 2021
Does this element fit RF330PXDZ0 model ?
For model number RF330PXDZ
Hello Celia, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11740695. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Jeffery
July 14, 2021
I would like to replace the gas oven components with an electric element, thermostat and control module for a commercial style stove. Can you send me the parts list with cost?
Hello Jeffery, Thank you for the question. Very sorry but Gas appliances can not be converted to Electric. For more specialized assistance or to speak with someone about this, we would suggest calling the manufacturer of the appliance directly. We hope this helps!

Was this helpful?
Thank you for voting!
Karina
October 19, 2021
Heating element is broken it’s GE oven range. Can’t find model number however the number entered is on door of oven will this element fit?
For model number 326B1229P002
Hello Karina, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the Oven. We will include a link on where to locate the model number sticker. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you! https://www.partselect.com/Find-Your-Range-Model-Number.aspx

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Whirlpool Wall Oven Bake Element

Replacing your Whirlpool Wall Oven Bake Element play video
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 18 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
I broke the Bake Element while cleaning the oven.
I removed the two screws that held the bake element in place. Next I removed the Bake Element. I had to unscrew the oven to go behind it because when one piece off of the element broke, it slide back behind the oven. I pushed the wire back thru the piece holes, connected the Element, and pushed the element with the wires back through the holes. I rescrewed the element in place and the oven. PartSelect helped me to save this year's Christmas.
  • Daniel from Cheraw, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
103 of 118 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bottom Oven Element Wasn't Working
It was easy to remove the old element. It only required the removal of two screws and pulling apart the electric connectors. It was just as simple to install the new one.
  • Shannon from Carlsbad, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
54 of 57 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake Unit not heating properly
Turned the power to the oven off. Took two crews out. Disconnected the old unit, connected the new unit, put the two screws back in and tested the unit.
Other Parts Used:
Screw
  • Dan from Madison, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
31 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake element was broken. Oven would not shut down.
I used a cordless screwdriver to remove the retaing screws. One of the connections was pucshed back too far and was almost hidden in the hole. I used the tweezers to pull it out, replace the bake lelement and the retaining screws. I'm good to go!
  • Lawrence from Atlanta, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
19 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven element
2 screws &2 push pull wires.
  • Eugene from Middleburg Heights, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
18 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Over heating oven and uneven baking. Oven thought it was in self cleaning mode.
Sensor replacement was removing 2 screws and gently pulling on old sensor until the clip comes out. Secured the other end of the wires so that it did not fall back inside. Then connected the new sensor clip to the oven wire, then gently returning wire into oven, and then screwing the sensor into place.
The baking element was easier than the sensor. Removed the 2 screws holding the element into the back bottom of the oven, and pulled the element forward to disconnect from clamps. Inserted new element into clamps and screwed it in. ***NOTE that there will be a smell from the new element. This smell is normal. If the smell continues after a couple minutes stop the oven and wait an hour before reattempting.
Other Parts Used:
Temperature Sensor
  • Nicholas from OWENS X RDS, AL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
16 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake oven element was not heating up
With little reluctance..I decided to change the part myself..but was very satisfied...with two screws to detach the bake oven and install the new one.I was very happy to receive the replacement part within 24 hours of placing the order with Part select.
  • Sunil from Princeton Junction, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The lower Bake Element on Electric oven broke
Removed the 2 screws holding the element in place. Unplugged the existing element. Plugged in new element - replaced screws. Took less than 5 minutes. :)
  • Ellen from EASTVALE, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
both heat element went out on my dryer and oven
easy part break down yall had. did not have it in my budget to buy both appliances, so found your web site. spent less than $100 to fix both. thanks, Chon
Other Parts Used:
Heating Element - 240V 5400W
  • Chon from El Campo, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer was making a very loud squeaking sound.
I followed the instructional video provided on the PartSelect website almost entirely. A couple of things I did that weren't covered in the video:
The retaining ring that keeps the drum support roller in place did not retain its shape well after I removed it, so I took a pair of needle-nose pliers and reshaped it a bit before putting it back on. Also, after replacing the drum support roller, when I went to put the belt back on, I pulled a panel off the back of the dryer -- this gave me direct access to the idler pulley, making it much easier to loop the belt back through.
Other Parts Used:
Drum Support Roller Kit
  • Thomas from Canton, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
6 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
44 Reviews
4.8
Filter By Rating:
  • 5 Stars
    39
  • 4 Stars
    4
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750369
Manufacturer Part Number: WPW10207397
Brand
Model Number
Description
Whirlpool
8RBS245PDQ1
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDB0
Wall Oven - Built-in 27" Electric, Double
Whirlpool
GBD277PDB09
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDB1
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDB10
Wall Oven - Built-in, Electric, Double
Whirlpool
GBD277PDB2
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDB3
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDB4
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDB5
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDB6
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDB7
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDB8
Wall Oven - Built-in, Electric, Double
Whirlpool
GBD277PDQ0
Wall Oven - Built-in 27" Electric, Double
Whirlpool
GBD277PDQ09
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDQ1
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDQ10
Wall Oven - Built-in, Electric, Double
Whirlpool
GBD277PDQ2
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDQ3
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDQ4
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDQ5
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDQ6
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDQ7
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDQ8
Wall Oven - Built-in, Electric, Double
Whirlpool
GBD277PDS09
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDS1
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDS10
Wall Oven - Built-in, Electric, Double
Whirlpool
GBD277PDS2
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDS3
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDS4
Wall Oven - Built-in, Electric
Whirlpool
GBD277PDS5
Wall Oven - Built-in, Electric

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service