Quick Question!

Have you ever purchased from PartSelect.com before?

11750108-1-S-Whirlpool-WPW10196406-Drip Bowl - 6"
11750108-1-S-Whirlpool-WPW10196406-Drip Bowl - 6" 11750108-2-S-Whirlpool-WPW10196406-Drip Bowl - 6" https://partselectcom.azureedge.net/Schematics/Maytag/45160.gif

Drip Bowl - 6"

Your Price

$3.92
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11750108
Manufacturer Part Number WPW10196406
Manufactured by Whirlpool

This drip bowl is used for electric cooktops and ranges, it is designed to sit under a six-inch surface burner. It catches the drips and spills coming from the cookware on the surface burner. This drip bowl is chrome, and it has a diameter of 7 2/3 inches. You need to remove the burner element to replace this part. Line the hole up with the element terminal blocks, and ensure the new bowl is flush with the surface of the cooktop before replacing the burner element. Drip bowls need to be replaced when they are lost, damaged, or you are no longer able to clean them adequately. This replacement part is sold individually.

This part works with the following brands: Whirlpool, Amana, Magic Chef, Roper, Maytag, Admiral, Crosley, Caloric, Norge, Hardwick, KitchenAid, Kenmore, Hoover, Jenn-Air, Inglis, Estate, Litton.

This part works with the following products: Range, Cooktop, Microwave Oven Combo, Microwave.

This part fixes the following symptoms:

  • Element will not heat.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Chrome Drip Bowl - 8"

Part Number 11750107

This drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements, and catches drips and spills from the cookware on the burner. The diameter of the drip bowl is approximately 9 3/4 inches. This replacement might appear slightly different, but it will fit your appliance. You will need no tools to complete this repair. Simply remove the burner element, remove the old bowl, line up the hole on the new bowl with the terminal block and drop it into place. Make sure the bowl is flat before reinstalling the element. While you have the element out you should inspect the terminals for corrosion, damage, or discoloration. If you notice any of those things you should also replace the element and terminal block. You will need to replace your drip bowl if it is lost, damaged, or can no longer be cleaned. This replacement part is sold individually. To extend the life of your new drip bowl we recommend you clean it regularly with soap and water.

$4.17
In Stock

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 31 reviews What's this?
1-15 of 31
 

549 of 563 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Joe from Greeley, CO

Oven wouldn't heat

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, then removed element and replaced with new
.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

464 of 466 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: susan from Owasso, OK

Temperature setting no longer readable

The new thermostat knob dial was installed in about a minute, good as brand new! I was concerned, as our range is about 25 years old, and my model number was not listed. But Partselect listed several similar models, and a quick spot check of these showed that the dial appears to be fairly universal for Whirlpool products. The new knob dial fit perfectly! The drip bowls also worked great.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

461 of 464 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Donna from Dallas, TX

Drip bowls were burned and tacky

First I removed the old bowls and replaced them with the new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

447 of 531 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: John from Chester, VT

Drip bowls needed to be replaced

took old bowls out, put new bowls in, took a coffee break

Help other customers find the most helpful instructions.

Were these instructions helpful?   

226 of 308 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers, Wrench set
Customer: Jon from Oakley, CA

Surface elements quit working

Drilled out old and broken hold down clips, installed new ones(4). Cut old wires attached to surface plug in block, striped wires, and attached new plugin kit(4), warmed up heat shrink with a hair dryer, put in new drip bowels, the stove is like new.
I ordered the parts on line early one morning, the next day they were at my door and installed that day, everything that I ordered was there, and fit properly.

Way to go Part Select.com

Jon

Help other customers find the most helpful instructions.

Were these instructions helpful?   

221 of 423 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Jody from Moweaqua, IL

Heating element for oven broke in two.

Removed the two screws holding the heating element to the back of the oven. Pulled the wires away from the connections of the old element and connected the new element. Reinstalled the screws holding the element to the back of the oven. Easiest repair I've ever done! Replaced the drip pans on the cook top and installed the new clock knobs. Good as new!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

210 of 409 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: Donna from Petaluma, CA

Needed to replace chrome drip bowls and replace one of the hold down clip since previous owner used incorrect drip bowls and put pressure on the hold down clip.

Pulled out the electric element from the range, replaced the new drip bowl on three of the burners and then replaced the electric element pushing it into the hold down clip. On the fourth burner, I removed the electric outlet, the previous incorrect drip bowl and had to drill out the broke off hold down clip that was no longer there. Next I placed the new hold down clip in position, alligned and fed the little screw through the hold down clip. I used a vice grip to hold the nut in place and with a screw driver tighened the nut. I placed the drip bowl in place, attached the electric element and slipped it into the new hold down clip. Everything went smoothly and I experienced an excellent repair job. We received prompt service and had no problems. I just hope the used appliance that we bought works now. It looks great. It is for a rental unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

210 of 412 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Linda from Atlanta, GA

Old drip pans stained

Replaced old drip pans with new ones - very easy - even a 68 yr old lady can do it!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

80 of 88 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: More than 2 hours
Tools:
Customer: Michael from Eden, VT

Regular parts replacement/maintenance.

We love our Jenn-Air electric range that we have owned since 1983 and couldn't get parts from where we bought it recently. We called around to Sears and other appliance dealers and they couldn't help us. We found your company searching on the internet and we are very much pleased with your parts listing and your great service. We will be back. Jody and Mike Hayden, Eden, Vt.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

133 of 254 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: cindy from Sebeka, MN

One of my burners would only work half the time, and you had to wobble it to make it work

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, connected the new element using the wire caps, and finished bye rescrewing the element backinto place.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

65 of 66 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: sylvia from ventnor city, NJ

We needed new drip pans and no one carried the model we needed

we removed the old pans after first removing the electric heating element and simply inserted tne new pans

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Janet from Philadelphia, PA

Electric coils would not stay flat as drip pans were incorrect fit

replaced drip pans with correct type

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Sharon from Yacolt, WA

Store-bought drip bowls wouldn't fit.

My elements just plug in so all I had to do was pull them out and replace the drip bowls. They fit perfectly!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set
Customer: CHARLES from SOMERSWORTH, NH

Cooktop elements worked intermittantly.

Turn the power off to the unit. Remove the cold element by lifting up and pulling out. Remove the drip pan. Remove the element plug screw and pull the plug up and out of the socket. Cut the leads to the plug as close to the plug end as possible to allow enough wire to splice the new plug in. Strip the insullation back 3/8" to allow for splicing. Install the shrink tube collar on the wire and place one new lead (prestripped at the factory)next to the old wire and place the wire nut provided over the bare wire ends and twist it on until it is tight. Bend the wire nut splice back over one of the leads and slide the shrink tape over it. Heat up the shrink tape with a hair dryer to make it tight over the wire nut connection. Repeat the process for the next lead. Slide the leads into the new socket. Install the socket and secure the the new screw provided. Reinstall the drip pan and plug in the heat element. Follow the same procedure for each element socket replaced. Turn the power back on.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Kenneth from Wellford, SC

Replaced indicator lights and bowls

To replace a bowl lift burner slightly (1") then pull gently until it comes out. Remove bowl, replace with new bowl. Insert burner by pushing gently yet firmly, place down into clip.

To replace indicator light, remove panel from back of stove.
Locate light indicator switch, push indicator lens through front of stove, hold in place (may require a second person) slide switch unto the nub of plastic on the indicator switch. Repeat for each broken indicator lens.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 31

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11750108
Manufacturer Part Number: WPW10196406
Brand Model Number Description
Admiral1058AF-CWRange - Electric
Admiral1058AF-CZRange - Electric
Admiral1058AH-WRange - Electric
Admiral1058AH-ZRange - Electric
Admiral1058WF-CWRange - Electric
Admiral1058WF-CZRange - Electric
Admiral1058WH-WRange - Electric
Admiral1068F-CZRange - Slide-in, Electric
Hoover1151AA-36Cooktop
Hoover1151AA-36GCooktop
Hoover1151AD-30Cooktop
Hoover1151AD-36Cooktop
Hoover1151AH-36GCooktop
Hoover1151AL-36GCooktop
Hoover1151WA-36Cooktop
Hoover1151WA-36GCooktop
Hoover1151WD-30Cooktop
Hoover1151WD-36Cooktop
Hoover1151WH-36GCooktop
Hoover1151WL-36GCooktop
Magic Chef1500PAARange
Magic Chef1500PAWRange
Magic Chef1500PRARange
Magic Chef1500PRWRange
Roper2101*0ERange - Ranges, Electric*
Roper2101*1ERange - Ranges, Electric*
Roper2101*2ERange - Ranges, Electric*
Whirlpool2101^0ECooktop
Whirlpool2101^1ECooktop
Whirlpool2101^2ECooktop