Drip Bowl - 6" WPW10196406 | Official Whirlpool Part | Fast Shipping | PartSelect
Quick Question!

Have you ever purchased from PartSelect.com before?

Drip Bowl - 6" – Part Number: WPW10196406
Drip Bowl - 6" – Part Number: WPW10196406 https://partselectcom.azureedge.net/Schematics/Maytag/45160.gif

Drip Bowl - 6"

33 Reviews
Your Price
$4.16

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11750108

Manufacturer Part Number WPW10196406

Manufactured by Whirlpool

This drip bowl is used for electric cooktops and ranges, it is designed to sit under a six-inch surface burner. It catches the drips and spills coming from the cookware on the surface burner. This drip bowl is chrome, and it has a diameter of 8 inches. You need to remove the burner element to replace this part. Line the hole up with the element terminal blocks, and ensure the new bowl is flush with the surface of the cooktop before replacing the burner element. Drip bowls need to be replaced when they are lost, damaged, or you are no longer able to clean them adequately. This replacement part is sold individually.

This part works with the following brands: Whirlpool, Amana, Roper, Magic Chef, Maytag, Caloric, Crosley, Admiral, Hardwick, Norge, KitchenAid, Kenmore, Hoover, Jenn-Air, Inglis, Estate, Litton

This part works with the following products: Range, Cooktop, Microwave Oven Combo

This part fixes the following symptoms: Element will not heat

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part Photo
Description
Price
Availability
(34)
Part Number: PS11750107
This drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements, and catches drips and spills from the cookware on the burner. The diameter of the dri...
$4.78
In Stock
Questions & Answers
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Installation Instructions Provided by PartSelect customers like you.
Average Repair Rating: 4.7 / 5.0, 33 reviews
What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Joe from Greeley, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPW10196405, WPW10196406, WP308180
oven wouldn't heat
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, then removed element and replaced with new
.
576 of 597 people found this instruction helpful.
Was this instruction helpful to you?
susan from Owasso, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPW10196405, WPW10196406, 311065
Temperature setting no longer readable
The new thermostat knob dial was installed in about a minute, good as brand new! I was concerned, as our range is about 25 years old, and my model number was not listed. But Partselect listed several similar models, and a quick spot check of these showed that the dial appears to be fairly universal for Whirlpool products. The new knob dial fit perfectly! The drip bowls also worked great.
466 of 468 people found this instruction helpful.
Was this instruction helpful to you?
Donna from Dallas, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPW10196405, WPW10196406
Drip bowls were burned and tacky
First I removed the old bowls and replaced them with the new.
461 of 465 people found this instruction helpful.
Was this instruction helpful to you?
John from Chester, VT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPW10196405, WPW10196406
Drip bowls needed to be replaced
took old bowls out, put new bowls in, took a coffee break
447 of 531 people found this instruction helpful.
Was this instruction helpful to you?
Jon from Oakley, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
WPW10196405, WPW10196406, 814103, 330031
Surface elements quit working
Drilled out old and broken hold down clips, installed new ones(4). Cut old wires attached to surface plug in block, striped wires, and attached new plugin kit(4), warmed up heat shrink with a hair dryer, put in new drip bowels, the stove is like new.
I ordered the parts on line early one morning, the next day they were at my door and installed that day, everything that I ordered was there, and fit properly.

Way to go Part Select.com

Jon
230 of 314 people found this instruction helpful.
Was this instruction helpful to you?
Jody from Moweaqua, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPW10196405, WPW10196406, WP3169181, WP308180
Heating element for oven broke in two.
Removed the two screws holding the heating element to the back of the oven. Pulled the wires away from the connections of the old element and connected the new element. Reinstalled the screws holding the element to the back of the oven. Easiest repair I've ever done! Replaced the drip pans on the cook top and installed the new clock knobs. Good as new!
222 of 424 people found this instruction helpful.
Was this instruction helpful to you?
Donna from Petaluma, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
WPW10196405, WPW10196406, 814103
Needed to replace chrome drip bowls and replace one of the hold down clip since previous owner used incorrect drip bowls and put pressure on the hold down clip.
Pulled out the electric element from the range, replaced the new drip bowl on three of the burners and then replaced the electric element pushing it into the hold down clip. On the fourth burner, I removed the electric outlet, the previous incorrect drip bowl and had to drill out the broke off hold down clip that was no longer there. Next I placed the new hold down clip in position, alligned and fed the little screw through the hold down clip. I used a vice grip to hold the nut in place and with a screw driver tighened the nut. I placed the drip bowl in place, attached the electric element and slipped it into the new hold down clip. Everything went smoothly and I experienced an excellent repair job. We received prompt service and had no problems. I just hope the used appliance that we bought works now. It looks great. It is for a rental unit.
210 of 409 people found this instruction helpful.
Was this instruction helpful to you?
Linda from Atlanta, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPW10196405, WPW10196406
Old drip pans stained
Replaced old drip pans with new ones - very easy - even a 68 yr old lady can do it!!
210 of 412 people found this instruction helpful.
Was this instruction helpful to you?
cindy from Sebeka, MN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPW10196405, WPW10196406, 12001676
one of my burners would only work half the time, and you had to wobble it to make it work
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, connected the new element using the wire caps, and finished bye rescrewing the element backinto place.
134 of 255 people found this instruction helpful.
Was this instruction helpful to you?
Michael from Eden, VT
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Parts Used:
WPW10196405, WPW10196406, WP71002111, 700855K, WB48X10055DS, WP312808
Regular Parts Replacement/Maintenance.
We love our Jenn-Air electric range that we have owned since 1983 and couldn't get parts from where we bought it recently. We called around to Sears and other appliance dealers and they couldn't help us. We found your company searching on the internet and we are very much pleased with your parts listing and your great service. We will be back. Jody and Mike Hayden, Eden, Vt.
83 of 92 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
33 Reviews
4.7
out of 5
Filter By Rating:
  • 5 Stars
    28
  • 4 Stars
    3
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Stars
    1
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11750108
Manufacturer Part Number: WPW10196406
Brand
Model Number
Description
Admiral
1058AF-CW
Range - Electric
Admiral
1058AF-CZ
Range - Electric
Admiral
1058AH-W
Range - Electric
Admiral
1058AH-Z
Range - Electric
Admiral
1058WF-CW
Range - Electric
Admiral
1058WF-CZ
Range - Electric
Admiral
1058WH-W
Range - Electric
Admiral
1068F-CZ
Range - Slide-in, Electric
Hoover
1151AA-36
Cooktop
Hoover
1151AA-36G
Cooktop
Hoover
1151AD-30
Cooktop
Hoover
1151AD-36
Cooktop
Hoover
1151AH-30
Cooktop
Hoover
1151AH-36G
Cooktop
Hoover
1151AL-36G
Cooktop
Hoover
1151WA-36
Cooktop
Hoover
1151WA-36G
Cooktop
Hoover
1151WD-30
Cooktop
Hoover
1151WD-36
Cooktop
Hoover
1151WH-30
Cooktop
Hoover
1151WH-36G
Cooktop
Hoover
1151WL-36G
Cooktop
Magic Chef
1500PAA
Range
Magic Chef
1500PAW
Range
Magic Chef
1500PRA
Range
Magic Chef
1500PRW
Range
Magic Chef
15GA-1
Range
Magic Chef
15GA-1-94
Range
Magic Chef
15GA-1-GG
Range
Magic Chef
15GA-10
Range