Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Douglas D - December 19, 2022
Verified Purchase
Simple fix!
Directions were great... it literally took longer to clear the shelves in the refrigerator than changing the damper control. Do not hesitate to do this repair on your own!
★★★★★
★★★★★
Chris M - November 17, 2022
Verified Purchase
Easy repair using a great part that worked as expected!
The part was exactly as expected. The instructional video on the website was extremely helpful. My fridge is back up and running like normal!
★★★★★
★★★★★
Terry P - July 10, 2019
Verified Purchase
Damper replace
Works great
★★★★★
★★★★★
Debbie L - April 25, 2018
Verified Purchase
great part easy install easy ordering
My part arrived on the day it was scheduled to be delivered. It was an easy install and easy repair, great part and easy ordering process.
★★★★★
★★★★★
Phyllis H - February 21, 2018
Verified Purchase
easy
Fridg started working before part arrived, thank you
★★★★★
★★★★★
David Z - February 20, 2018
Verified Purchase
Good service
It turns out it was the wrong part so I returned it
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 10 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Refrigerator section too cold, temperature usually @ 30 degrees, freezer ok
First off, I learned from YTube how to go about figuring out what might be wrong & how to fix it. I watched numerous videos and narrowed it down to the damper as the part to be replaced. I learned how to use the Jazz Board in the fridge to test components & verified the damper wasn't getting signal to open/close. I removed the old damper
... Read more& put in the new one following what I had seen on the videos. I found a video that had the same type of damper assembly as my fridge & used it to show me how to remove & replace the damper. This was the 2nd part I had to replace to get my fridge up & working. I spent a total of 224.00 on parts and now the fridge is quieter than it's been in years. Finally, if a 66 year old woman can do this, so can you. Just watch YTube & also PartsSelect also has videos also.
Read less
C D from CATHEDRAL CTY, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy damper
Easy fix, it's right in the back of the fridge under a cover that just clips in, a piece of foam, and two screws. The hardest part is getting the clips free without breaking them. After replacement it's silent instead of making a grinding noise regularly.
Keith from OLYMPIA, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy, running constantly motor in damper unit.
Unsnapped and pulled off small cover exsposing two phillips head screws. I removed larger cover and styrofoam insert fully exsposing the damper unit. i unplugged same and with a 1/2 inch wood chisel was able to release the "snaps" holding the old unit in place. Simply reverse procedure to install new unit.
lawrence from TRAVERSE CITY, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control noisy when opening and closing removed damper housing
Pop off vent cover remove 2 screws removed cover housing and foam. Removed damper by unclipping tabs on left and right side of control lift up and out. Unplugged power wires reinstalled in reverse order.
Nelson from CATSKILL, NY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fresh Food Compartment occasionally going down to 28-30 degrees F
Failure detected as Damper Control at upper rear of compartment would continuously open/close, would never stay open or closed. Sometimes the main board would turn it off (maybe a low thermistor limit?), but it would stick open a bit, and keeping letting freezer air into fridge. Could have potentially been control board, but as it turns
... Read more out after disassembly of the defective damper, the internal microswitch was stuck in the closed position so it wouldn't shut off the motor. Easy fix by gently pulling the cover off the damper control, pull out Styrofoam encasement, then a phillips to remove the damper assembly. Gently push tabs to release wire connectors. Reverse the process and you're done! If I really wanted to go on the cheap, I could have just changed the microswitch, but that looked like a shaky maneuver at best. This site saved me on this one, so happy to share my experience with this Maytag and its nasty habit of freezing my milk and eggs!! :)
Read less
Galen from WASECA, MN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had two problems
one was the refrig wasn't holding temperature properly, sometimes too cold, sometimes too warm. Also the cold water dispenser didn't work at all. First, IMPORTANT! Check to see if there are different parts for your 'series' of model. I made the mistake of missing this and received the wrong parts the first time as Parts Select doesn't hig
... Read morehlight this! It would be nice if their website checked to see if different parts are available for your model and ask if you checked this important fact. They were very good to replace the wrong part with the right one and refund the amount of the returned part. On my model, the first two digits of the serial number denotes the series number, which means you may need a 'series' specific model part. After getting the correct parts, replacing the damper control solved the temperature control issues and the refrige is actually quieter now (It used to make sounds as the damper opened or closed). My unit used a 'series 10' version and there was no need to purchase the harness, as I just used the old one. Replacing the dual water valve solved the issue with my water dispenser not working. I'm good with hand tools so both of these were easy for me using just basic tools.
Inside the food section above the top shelf behind the light in the back, remove the lid from the cover in lifting from the lower edge no tools necessary here. Remove two screws with Phillips screw driver remove entire housing inclusive Styrofoam insert. Unplug damper Control Unit. Remove two screws and remove damper control unit and repl
... Read moreace in reverse order. Finally that refrigerator is quiet, I should have done this long time ago. Unbelievable this is the second part I have to replace on this expensive refrigerator.
Read less
klaus from san diego, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
20 of 24 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the upper half of the refrigerator wasn't being cooled
I called the repairman and he troubleshot the problem and told me that he could order the part or that I could. He quickly explained what to do. I ordered the part it came in with 2 days during that time I looked up on how to remove and replace the part on the website. The website stated it took around 15 minutes. That is all it took.
... Read more I had to use a screw driver to remove two screws and seperate the connection. I reconnected the wiring per instructions on the website reversed the process and it was done within 15 minutes. I save a lot of money and time away from work. This is a grest site to get what you need to fix your appliances. If I have any problems with my other equipment I will becoming back to this website to get the parts and information
I want to thank you for providing the information and helping folks out that can do the job
Read less
chip from Reading, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
65 of 80 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy Control
Remove cover inside frig at rearwall top with screw driver. Remove phillips screws holding unit in place. Unclip connectors ,and replace in reverse order.
Nicholas from Agawam, MA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
20 of 23 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Periodic loud buzzing noise from frig damper unit
Unsnap damper louver cover using only your fingernails at bottom. Remove two phillips screws from damper cover. Remove styrofoam molded insulation. Squeeze electrical connector to release latch; unplug connector. Release latches on both sides of damper control while gently pulling on damper control unit to remove it. Install new unit by d
... Read moreoing above steps in reverse. Damper door may move when electrics connected; keep fingers clear. Amana would not honor our extended warranty that we paid $65 for, saying that noises are not covered. Im glad that Partselect supplied the part quick and and a great price. The frig is quiet for the first time in 2 years!
Read less
James from Oconomowoc, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
24 of 31 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
21 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
December 8, 2017
My fridge section is too cold. Would like to check the damper control assembly. Looking at the parts list, it appears that I have to remove the icemaker assembly to access it. Is this correct? Is there any way to check motor function if the flapper doesn't appear to be stuck? Thanks
For model number GZ25FSRXYY0
Hi Steve, Thank you for the question. You shoudl not have to remove the icemaker to install this damper. Here is a repair story from a previous customer ``Unsnap damper louver cover using only your fingernails at bottom. Remove two phillips screws from damper cover. Remove styrofoam molded insulation. Squeeze electrical connector to release latch; unplug connector. Release latches on both sides of damper control while gently pulling on damper control unit to remove it. Install new unit by doing above steps in reverse. Damper door may move when electrics connected; keep fingers clear.`` You can test the motor with a Multi Meter and check for continuity. Hope this helps!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Bo
January 15, 2018
My jan-air jfd 2589kes the top fridge part temp stays at 60 plus degree and the freezer is working fine. Not sure what part i need. Thank you for your time!
Hello Bo, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: damper control assembly, thermistor, defrost thermostat, evaporator fan motor, and the defrost heater. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
February 26, 2018
The refrigerator is not cooling. How can you tell if the air damper control is broken?
For model number GB2FHDXWB02
Hi Mike, Thank you for the question. You can watch the damper to see if it is opening and closing to allow the air through. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Martha
November 7, 2017
My fridge doesn't let me control the temp. The digital numbers for the freezer and refrigerator start running like crazy. The freezer stays in 5 and the fridge in 7 the coldest.
For model number 59665232403
Hi Martha, Thank you for the question. To fix the controller issue you will need to replace the Electronic Control Board,PartSelect Number PS11755733. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Jack
August 5, 2019
Freezer is 0 fridge is 37 to 40 damper is continuously opening and closing is it the damper or a thermostat
For model number 596.79323016
Hello Jack, thank you for inquiring. It is most likely a faulty Condenser Fan Motor part number PS11750853 for your model. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
April 4, 2018
Fridge compartment is too cold, freezing eggs, vegetables, etc. Even with control panel set to 45 degrees. How can i tell if it is the control panel, the thermostat, or the airflow regulator? Should i start with the cheapest part and move toward more costly? Thanks! Jim
For model number WRX735SDBM00
Hi Jim,
Thank you for your question. You would be able to test your most of those parts with a multi meter. You would basically check both the thermostat and the damper assembly for continuity to make sure they are working. You may also want to look at your evaporator fan motor as well. It could be that it is continually blowing too much air into you fridge portion. If all of those parts are fine, then I would suggest taking a look at your control board. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Rondal
January 22, 2019
Where is damper control located in this model
For model number wrtt318fzwd02
Hello Rondal, thank you for your question. The Damper control assembly part number WPW10196393 is not the correct replacement part for your unit. The the damper, or diffuser for your unit ( part number W10861170) is toward the back of the fridge at the top, right in the middle. This is just a little channel that will allow air to flow into the fridge. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kurt
December 3, 2017
Does this unit incorporate an internal fan? Emits rattle type sound that dissipates in a short period of time.
For model number ABB2224BRB00
Hi Kurt, Thank you for the question. Depending on where the noise is coming from, there are two fans. The fan in the freezer is the Freezer Evaporator Fan Motor,PartSelect Number: PS11748697. There is also a fan that blows air onto the compressor, PartSelect Number: PS11750853. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ralph
December 4, 2019
Does this damper control valve work with my Whirlpool model number
For model number GSC25C6EYy02
Hello Ralph and thanks for writing.
It seems the part you are looking for has been discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute.
Part #ps11750106 may fit with your unit, however, as this part does not show as being compatible with your model number, we can not guarantee that it will fit. We would suggest contacting the manufacturer directly. We hope this helps. Please contact us anytime
1 person found this helpful.
Was this helpful?
Thank you for voting!
RICHARD
November 1, 2017
Will this fit motor #418-083-20 asthisiswhat is onthis one'.Has also #md-40-083-20. My bottom freezer works but get no kooling in the frig.No matter how low i turn the temp down. Do you think this will solve the problem if so need to order right away.To fix it .Thank you
For model number ABD2233DEQ
Hi Richard,
Thank you for your inquiry. The damper control assembly is one of the parts that may fix the issue. There are some other parts that you will need to check to see which one is causing the issue. You will need to check the defrost thermostat kit, the electronic control board, the condenser fan motor, the compressor start device and capacitor, the run capacitor, the defrost thermostat, the evaporator fan motor and the defrost heater. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750106
Manufacturer Part Number: WPW10196393
