Part Location Diagram of WPW10195622 Whirlpool Rack Stop Clip
See part 12 in the diagram
Replacing your KitchenAid Dishwasher Rack Stop Clip
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Rack Stop Clip WPW10195622

 Fits your 66513293K114!
★★★★★
★★★★★
78 Reviews

Rated by 23 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 10.70
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 66513293K114!
PartSelect Number PS11750071
Manufacturer Part Number WPW10195622
Manufactured by Whirlpool
Product Description

Rack Stop Clip Specifications

This manufacturer-approved Rack Stop Clip is a gray plastic part which can be installed with a screwdriver. Measuring slightly over an inch in length, it prevents the rack from sliding too far and falling off. If broken or damaged, then the rack will slide too far and this is a sign the part should be replaced. It attaches to the end of the top dishwasher rack. This clip can be used for the left or right side, and is sold individually. It is a good idea to replace both sides at once. To make this repair, start by pulling out the rack, then, using your screwdriver, reach in behind the rack stops and press the clips in. You should be able to remove the stops from the track from here. Next, you should be able to slide the track back over the rollers and snap the new track stop into place.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your KitchenAid Dishwasher Rack Stop Clip

Replacing your KitchenAid Dishwasher Rack Stop Clip
Troubleshooting
This part fixes the following symptoms:
Door won’t close | Door latch failure | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Kenmore, Whirlpool, Jenn-Air.
Part# WPW10195622 replaces these:
AP6016778, W10195622, WPW10195622VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
78 Reviews
4.6
Filter By Rating:
  • 5 Stars
    63
  • 4 Stars
    7
  • 3 Stars
    1
  • 2 Stars
    3
  • 1 Star
    4
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 23 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
TOP RACK END CLIP BROKE OFF
PULLED BROKEN CLIP OFF AND SQUEEZED NEW ONE IN. I HAD TO USE PLIERS TO SQUEEZE TOGTHER SINCE i AM 77 YEARS OLD AND HANDS ARE NOT THAT STRONG ANY MORE. I HAD ALSO WATCHED THE INTERNET VIDEO TO MAKE SURE I COULD HANDLE THIS CORRECTLY. 10 MINUTES MAX TO UNLOAD TOP RACK AND PUT TOGETHER.
  • Sonya from YOUNGSTOWN, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
End stop on the upper rack of the dishwasher
Reviewed the video of this problem. Followed these instructions using a flat screwdriver to release the broken stop. Then used the same tool to set the piece firmly in place.
  • Victoria A. from CATONSVILLE, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top rack rail broken
Installed new rail and stop clip. Less than 5 minute fix.
  • Julie from CLOVIS, NM
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left side rack clip came off
I took the top dishwasher rack off, then took off the old clip I had taped on. I hadn’t watched the video so I put the new one on by looking at the other side rail and inserted the new part matching the other rail, clicked the new clip on and I was done. it was quite easy for an eighty-one year old woman!! It did take me awhile to figure it out.
  • Lenora from EMMETSBURG, IA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper drawer rack stop clip broke caused one side fell off rail.
I followed the YouTube attached with PartSelect email invoice to fix it. I am very happy PartSelect sent repairing video instruction and took me less than 15 minutes to get it done. Awesome!
  • Pooi from TORRANCE, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top rack rear stop broken
Remove any pieces of the rear stop by prying it off the end with small flat blade screwdriver. Make sure rack is fully on the roller tracks and then carefully push the new plastic end piece onto the rack. Be sure to orient it correctly by checking the end piece of the other rack.
I ordered two and replace them both at the same time.
  • Linda from BEND, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The rack stop clip on the upper right rail broke. I ordered two replacements and installed the part in about 15 minutes!
I pulled the upper rack out of the dishwasher. I then removed the broken rack clip stop on the right side and reinstalled the new replacement clip. I then put the rack back onto the rollers and voila, the upper rack no longer fell down off of the tracks!! Problem solved and the replacement clip only cost $8.95!!
  • Patricia from MC CORMICK, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace parts to basket
did need the strength of husbands hands to pop out old parts
Other Parts Used:
Rack Stop Clip Lower Dishrack Wheel
  • Eugena from LULING, LA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fully loaded top rack would detach from track when pulled out for emptying.
Removed dishwasher from cabinetry to replace tub rollers (4). Replaced roller sets (4) on top rack. Also replace both rails and rail stops. Screwdriver was only tool required for this part of repair. Needed wrench and screwdriver to remove and replace dishwasher in lower cabinetry.
Other Parts Used:
Dishwasher Dishrack Roller Dishwasher Upper Rack Roller Rack Stop Clip
  • Richard from TRUCKEE, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The clip on the back upper rail broke
I used pliers to pull the old clip out and pushed the new one in. Easy as that!!
  • DONNA from BOONEVILLE, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

12 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
July 20, 2017
How do I take this part off to replace it
PartSelect logo
Hi Oscar, start by pulling out the rack. Then, using a small flat blade screwdriver, reach in behind the rack stops and press the clips in. From there the stops can be pulled off the track. I hope this helps!

16 people found this helpful.

Was this helpful?
Thank you for voting!
Paul
July 20, 2017
The upper dishrack in my dishwasher keeps falling off of the rails. This is a gently used dishwasher and I wanted to confirm that this is the rail stop part I would need to prevent the top rack from coming off
PartSelect logo
Hi Paul, yes, this is the right part. The purpose of the rack stops clips are to clip in at the end of the top dishwasher rack to prevent it from sliding out and falling off. Please let us know if you have any further questions.

9 people found this helpful.

Was this helpful?
Thank you for voting!
Mike
July 20, 2017
Looking for the dishrack stop for my upper dishrack on my dishwasher. I think my unit has two of these- one on the left and one on the right. Does this purchase only come with one stop and is it for the left or the right or both?
PartSelect logo
Hello Mike, this order will come with 1 dishrack stop, and can be used for the left or the right side. If both dishrack stops need replacing, you will have to purchase 2 of these. Best of luck with this repair.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Tim
February 19, 2018
Re: Wpw10195622 “rack stop clip”. Your answer to multiple questions (paul, et al) is wrong. This part goes in the back end of the “slide rail”/“drawer track” (wpw10195623) to keep the track from coming off, and to remove or replace when removing and replacing the rail. It is more robust than the front rack stop, which is part of the “drawer track” assembly and apparently not available separately. This front stop consists of a robust plastic base, that is molded (melted) permanently onto the front end of the metal rail (“track”), and a flimsier plastic from stop that snaps on and swivels 90 degrees to allow you to remove the drawer for cleaning. This front swiveling drawer stop is the one that breaks so that the rack comes off the rail if you pull it out too far. The only way to get this part is to replace the “drawer track” (above), or canabolize another machine, since it is part of that assembly.
For model number 66513252K114
PartSelect logo
Hi Tim, Thank you for your information, that is very helpful. One thing to note is that not all models are actually formatted the same. Though many models use the same sort of parts, they are not all used the same way. Some models use this clip as the front piece, in your particular case it is used as the back piece and the front piece only comes with the rack track. If you ever have any questions about parts just let us know, we can generally determine what part goes where by using your diagrams. I hope that helps. Have a great day.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Penny
October 22, 2019
Is the stop clip the same on the front of the rack and the back of the rack?
For model number KUDC10FXWH5
PartSelect logo
Hi Penny, thank you for your question. They would be different parts. The front clip is offered separately but the back clip is only offered with the track. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Penny
October 23, 2019
This is a follow up question from yesterday about the stop clip on the upper rack of my dishwasher. The picture of the rack shows the stop clip being at the back of the rack, but the answer i received yesterday stated that the stop clip is sold separately for the front and the back clip is sold connected to the track--which is correct?
For model number KUDC10FXWH5
PartSelect logo
Hello Penny and thanks for writing. PS11750071 This rack stop clip works for either the right or left side of your upper dish rack. This part is sold individually. This part fixes the following symptoms: Door won’t close, Door latch failure. We hope this helps. Please contact us anytime.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Steve
November 11, 2017
I need to replace the upper rail clip so the wheel does not come out when the basket is pulled forward. The instructions say a screwdriver is needed to remove the old and screw in the new clip. As i look at it, it does not screw and has more of a rivet attachment. Do i need to replace the whole rail ? Is there instructions ?
For model number KUDC10IXSS7
PartSelect logo
Hi Steve, Thank you for your question. We had a similar question asked by another customer, here is the answer: start by pulling out the rack. Then, using a small flat blade screwdriver, reach in behind the rack stops and press the clips in. From there the stops can be pulled off the track. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Nicky
February 28, 2020
The front clip on the top rail has broken and i'm wondering if this can be purchased separately for this model or if i need to get the entire rail. Note that this clip on this model is different than the back clip. It snaps open so that you can remove the top drawer completely.
For model number 13922k012
PartSelect logo
Hello Nicky, thank you for your question. The front clip on the upper rail is only available by ordering the whole rail. You will have to order PartSelect Number PS11750072. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Marcelle
July 25, 2021
Water isn't entering the washer it starts but the water doesn't fill
PartSelect logo
Hello Marcelle, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you.

Was this helpful?
Thank you for voting!
Robert
July 30, 2021
Left stop on top rack broke need to order both probably ,but it work then rack drop down on one side wouldn't align with water hole . Don't know if realign or what.
For model number wdt710paym3
PartSelect logo
Hello Robert, Thank you for your inquiry. You may also need to replace the rollers that hold the rack to the track as well, part# PS11753471. Hope this helps.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750071
Manufacturer Part Number: WPW10195622
Brand
Model Number
Description
Kenmore
66213293K112
Dishwasher - Kenmore Dishwasher Model 662.13293K112 (66213293K112, 662 13293K112) Parts
Kenmore
66513042K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513042K111
Dishwasher
Kenmore
66513042K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513042K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513042K114
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513042K115
Dishwasher - DISHWASHER
Kenmore
66513042K116
Dishwasher - DISHWASHER
Kenmore
66513043K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513043K111
Dishwasher
Kenmore
66513043K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513043K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513043K114
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513043K115
Dishwasher - DISHWASHER
Kenmore
66513043K116
Dishwasher - DISHWASHER
Kenmore
66513044K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513044K111
Dishwasher
Kenmore
66513044K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513044K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513044K114
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513044K115
Dishwasher - DISHWASHER
Kenmore
66513044K116
Dishwasher - DISHWASHER
Kenmore
66513049K110
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513049K111
Dishwasher
Kenmore
66513049K112
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513049K113
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513049K114
Dishwasher - UNDERCOUNTER DISHWASHER
Kenmore
66513049K115
Dishwasher - DISHWASHER
Kenmore
66513049K116
Dishwasher - DISHWASHER
Kenmore
66513252K110
Dishwasher - UNDERCOUNTER DISHWASHER
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service