Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This manufacturer-approved Rack Stop Clip is a gray plastic part which can be installed with a screwdriver. Measuring slightly over an inch in length, it prevents the rack from sliding too far and falling off. If broken or damaged, then the rack will slide too far and this is a sign the part should be replaced. It attaches to the end of the top dishwasher rack. This clip can be used for the left or right side, and is sold individually. It is a good idea to replace both sides at once. To make this repair, start by pulling out the rack, then, using your screwdriver, reach in behind the rack stops and press the clips in. You should be able to remove the stops from the track from here. Next, you should be able to slide the track back over the rollers and snap the new track stop into place.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Replacing your KitchenAid Dishwasher Rack Stop Clip
Troubleshooting
This part fixes the following symptoms:
Door won’t close
Door latch failure
Not cleaning dishes properly
This part works with the following products:
Dishwasher
Part# WPW10195622 replaces these:
AP6016778, W10195622, WPW10195622VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
90 Reviews
4.6
Filter By Rating:
5 Stars
74
4 Stars
8
3 Stars
1
2 Stars
3
1 Star
4
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David N - July 25, 2018
Verified Purchase
Easy repair
The website was easy to use, the shipping was fast, and the part fitment was perfect
★★★★★
★★★★★
Mark C - January 29, 2018
Verified Purchase
Perfect
Just what I needed, and easily installed.
★★★★★
★★★★★
Paul F - July 25, 2018
Verified Purchase
Easy repair. Rack doesn't fall out of dishwasher any longer.
Part arrived quickly, looked and felt just like the original.
★★★★★
★★★★★
Amika N - February 1, 2018
Verified Purchase
great!
Got the parts pretty quick and it was easy to put it on. My left one was broken, but I just went ahead and bought two because the right one might break soon. While putting on the left one on, I pushed hard (?) and broke the right one too, so it was right to order for both sides :)
★★★★★
★★★★★
Rachel C - April 7, 2020
Verified Purchase
The sites nice design made finding the part easy!
The rack stopclip had broken leading to the annoying property of the rack coming out and falling off the supports. The replacement part was perfect and fixed the problem. Thanks!
★★★★★
★★★★★
ANGELA R - March 26, 2021
Verified Purchase
diswasher part
fast service and easy to assemble
★★★★★
★★★★★
Kathleen B - February 8, 2018
Verified Purchase
Easy repair
PartSelect understood exactly what part I needed and shipped it immediately. Part popped into the rack with no problem.
★★★★★
★★★★★
Tim S - February 1, 2020
Verified Purchase
Quick and easy repair
The site was really easy to search and navigate to the right part. The part was delivered quickly and was really easy to install. Now when opening the top rack, my rack won't come off track.
★★★★★
★★★★★
Robert B - February 15, 2018
Verified Purchase
Great ordering process, quick delivery and easy to install.
Very pleased with the process and the results. Easy interface and timely delivery. Only drawback was that the apparent link to an installation video was referenced by not available.
★★★★★
★★★★★
Jennifer H - June 17, 2019
Verified Purchase
Perfect fit, great price.
Once I figured out what parts I needed they were easily ordered and shipped quickly. I ordered the wheels and on clip for the gliders the to rack sits on. Works great now.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 23 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
TOP RACK END CLIP BROKE OFF
PULLED BROKEN CLIP OFF AND SQUEEZED NEW ONE IN. I HAD TO USE PLIERS TO SQUEEZE TOGTHER SINCE i AM 77 YEARS OLD AND HANDS ARE NOT THAT STRONG ANY MORE. I HAD ALSO WATCHED THE INTERNET VIDEO TO MAKE SURE I COULD HANDLE THIS CORRECTLY. 10 MINUTES MAX TO UNLOAD TOP RACK AND PUT TOGETHER.
Sonya from YOUNGSTOWN, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
End stop on the upper rack of the dishwasher
Reviewed the video of this problem. Followed these instructions using a flat screwdriver to release the broken stop. Then used the same tool to set the piece firmly in place.
Victoria A. from CATONSVILLE, MD
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top rack rail broken
Installed new rail and stop clip. Less than 5 minute fix.
Julie from CLOVIS, NM
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left side rack clip came off
I took the top dishwasher rack off, then took off the old clip I had taped on. I hadn’t watched the video so I put the new one on by looking at the other side rail and inserted the new part matching the other rail, clicked the new clip on and I was done. it was quite easy for an eighty-one year old woman!! It did take me awhile to figu
... Read morere it out.
Read less
Lenora from EMMETSBURG, IA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper drawer rack stop clip broke caused one side fell off rail.
I followed the YouTube attached with PartSelect email invoice to fix it. I am very happy PartSelect sent repairing video instruction and took me less than 15 minutes to get it done. Awesome!
Pooi from TORRANCE, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top rack rear stop broken
Remove any pieces of the rear stop by prying it off the end with small flat blade screwdriver. Make sure rack is fully on the roller tracks and then carefully push the new plastic end piece onto the rack. Be sure to orient it correctly by checking the end piece of the other rack. I ordered two and replace them both at the same time.
Linda from BEND, OR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The rack stop clip on the upper right rail broke. I ordered two replacements and installed the part in about 15 minutes!
I pulled the upper rack out of the dishwasher. I then removed the broken rack clip stop on the right side and reinstalled the new replacement clip. I then put the rack back onto the rollers and voila, the upper rack no longer fell down off of the tracks!! Problem solved and the replacement clip only cost $8.95!!
Patricia from MC CORMICK, SC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replace parts to basket
did need the strength of husbands hands to pop out old parts
Fully loaded top rack would detach from track when pulled out for emptying.
Removed dishwasher from cabinetry to replace tub rollers (4). Replaced roller sets (4) on top rack. Also replace both rails and rail stops. Screwdriver was only tool required for this part of repair. Needed wrench and screwdriver to remove and replace dishwasher in lower cabinetry.
I used pliers to pull the old clip out and pushed the new one in. Easy as that!!
DONNA from BOONEVILLE, MS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
July 20, 2017
How do I take this part off to replace it
Hi Oscar, start by pulling out the rack. Then, using a small flat blade screwdriver, reach in behind the rack stops and press the clips in. From there the stops can be pulled off the track. I hope this helps!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
July 20, 2017
The upper dishrack in my dishwasher keeps falling off of the rails. This is a gently used dishwasher and I wanted to confirm that this is the rail stop part I would need to prevent the top rack from coming off
Hi Paul, yes, this is the right part. The purpose of the rack stops clips are to clip in at the end of the top dishwasher rack to prevent it from sliding out and falling off. Please let us know if you have any further questions.
9 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
July 20, 2017
Looking for the dishrack stop for my upper dishrack on my dishwasher. I think my unit has two of these- one on the left and one on the right. Does this purchase only come with one stop and is it for the left or the right or both?
Hello Mike, this order will come with 1 dishrack stop, and can be used for the left or the right side. If both dishrack stops need replacing, you will have to purchase 2 of these. Best of luck with this repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Tim
February 19, 2018
Re: Wpw10195622 “rack stop clip”. Your answer to multiple questions (paul, et al) is wrong. This part goes in the back end of the “slide rail”/“drawer track” (wpw10195623) to keep the track from coming off, and to remove or replace when removing and replacing the rail. It is more robust than the front rack stop, which is part of the “drawer track” assembly and apparently not available separately. This front stop consists of a robust plastic base, that is molded (melted) permanently onto the front end of the metal rail (“track”), and a flimsier plastic from stop that snaps on and swivels 90 degrees to allow you to remove the drawer for cleaning. This front swiveling drawer stop is the one that breaks so that the rack comes off the rail if you pull it out too far. The only way to get this part is to replace the “drawer track” (above), or canabolize another machine, since it is part of that assembly.
For model number 66513252K114
Hi Tim,
Thank you for your information, that is very helpful. One thing to note is that not all models are actually formatted the same. Though many models use the same sort of parts, they are not all used the same way. Some models use this clip as the front piece, in your particular case it is used as the back piece and the front piece only comes with the rack track. If you ever have any questions about parts just let us know, we can generally determine what part goes where by using your diagrams. I hope that helps. Have a great day.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Penny
October 22, 2019
Is the stop clip the same on the front of the rack and the back of the rack?
For model number KUDC10FXWH5
Hi Penny, thank you for your question. They would be different parts. The front clip is offered separately but the back clip is only offered with the track. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Penny
October 23, 2019
This is a follow up question from yesterday about the stop clip on the upper rack of my dishwasher. The picture of the rack shows the stop clip being at the back of the rack, but the answer i received yesterday stated that the stop clip is sold separately for the front and the back clip is sold connected to the track--which is correct?
For model number KUDC10FXWH5
Hello Penny and thanks for writing.
PS11750071 This rack stop clip works for either the right or left side of your upper dish rack. This part is sold individually.
This part fixes the following symptoms: Door won’t close, Door latch failure. We hope this helps. Please contact us anytime.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Steve
November 11, 2017
I need to replace the upper rail clip so the wheel does not come out when the basket is pulled forward. The instructions say a screwdriver is needed to remove the old and screw in the new clip. As i look at it, it does not screw and has more of a rivet attachment. Do i need to replace the whole rail ? Is there instructions ?
For model number KUDC10IXSS7
Hi Steve,
Thank you for your question. We had a similar question asked by another customer, here is the answer: start by pulling out the rack. Then, using a small flat blade screwdriver, reach in behind the rack stops and press the clips in. From there the stops can be pulled off the track. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Nicky
February 28, 2020
The front clip on the top rail has broken and i'm wondering if this can be purchased separately for this model or if i need to get the entire rail. Note that this clip on this model is different than the back clip. It snaps open so that you can remove the top drawer completely.
For model number 13922k012
Hello Nicky, thank you for your question. The front clip on the upper rail is only available by ordering the whole rail. You will have to order PartSelect Number PS11750072. Good luck with your repair!
Water isn't entering the washer it starts but the water doesn't fill
Hello Marcelle, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you.
Was this helpful?
Thank you for voting!
Robert
July 30, 2021
Left stop on top rack broke need to order both probably ,but it work then rack drop down on one side wouldn't align with water hole . Don't know if realign or what.
For model number wdt710paym3
Hello Robert, Thank you for your inquiry. You may also need to replace the rollers that hold the rack to the track as well, part# PS11753471. Hope this helps.
