The Dishwasher Lower Dishrack Roller is a grey plastic part which attaches to the bottom of the lower dishrack, allowing you to slide it easily in and out. If the rack no longer moves smoothly or shows visible damage then it may be time to replace it. Check your model number and user manual to see if this is the right part for your appliance. To attach this part to your dishwasher, align the adjustable tines with the middle slot in the roller assembly. From there, it should just snap into place on the rack. The wheels and pins for this part are only sold as an assembly of two per set in this part, unfortunately, these individual components are not available to purchase separately.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close | Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, KitchenAid, Whirlpool, Jenn-Air.
Part# WPW10195417 replaces these:
AP6016764, W10195417, WPW10195417VP
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lois
November 8, 2018
I only need the pin for the wheel assembly, one wheel fell off and i can't find the pin. Do they sell the wheel and pin separately? It seems rather costly for the entire assembly.
For model number KDFE104DWH1
Hi Lois, thank you for your question. Unfortunately no. The axle is not sold without the roller. We apologize that our prices are not as low as you expected. We base our prices on what we are charged by the manufacturer for the parts. We try to keep our prices as low as possible, but do also have to keep them at a level to help cover our costs. We hope this helps to explain the reasoning behind the prices! Good luck with your repair.
54 people found this helpful.
Was this helpful?
Thank you for voting!
Roy
October 13, 2017
Can you send wheels and tabs to hold them separately?
For model number w10195417 - part #
Hello Roy, thank you for contacting us. The wheels are sold separately from the rack, as well as the clips and tabs. Hope this helps!
23 people found this helpful.
Was this helpful?
Thank you for voting!
Betty
November 8, 2019
Do the wheels stay on? The ones i have now keep popping out.
For model number KDFE104DBL1
Hello Betty,
Thank you for your question. They are supposed to stay on the roller plate yes. If the wheels keep popping off, you would need to replace the entire roller since the wheels are not available separately. Hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Ruth
January 20, 2018
How does this part attach to dishwasher?
For model number W10195417 whirlpool wheels directions
Hello Ruth, Thank you for your inquiry. Align the adjustable tines with the middle slot in the roller assembly, then it should just snap into place on the rack. Although we do not have a repair video for this exact part number, I have included a link for a similar model to assist you. Hope this helps!
https://www.youtube.com/watch?v=7MBgy1xgfek&list=PLD984081941E1E8CD&index=190
6 people found this helpful.
Was this helpful?
Thank you for voting!
Susann
August 23, 2017
Have 3 year old KitchenAid dw. Told this part would let me replace 2 bottom rack wheels. One on each rt side wheel unit but is not a Kenmore. Will this part really work?
For model number KDFE104DBL0
Hi Susann,
Thank you for your inquiry. Yes, these parts are sold individually but they are the correct wheels for your lower dishrack according to your model number. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Donna
August 6, 2018
Can i buy two wheels and tabs for my dishwasher instead of the entire assembly
For model number Kdfe304dsso
Hello Donna, thank you for your question. Unfortunately, the wheels are only sold as an assembly of two per set which is part number Lower Dishrack Roller Part Number: WPW10195417. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jacob
December 16, 2017
Is the pin which holds the wheels on sold separately? If so, what is the part number? Thanks!
For model number KDFE304DSS0
Hello Jacob,
Thanks for your question. The pin is only included with the lower dishrack roller part.
I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ed
May 5, 2018
How many units do you get?
For model number WPW10195417
Hi Ed,
Thank you for your question. It looks like in the part description above we have indicated that this lower dishrack roller is sold individually. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Todd
March 4, 2018
I need to replace the bottom rack wheel assembly. My dishwasher is made by Whirlpool and sold by ikea. Is this part compatible? Partselect number ps11750057
Manufacturer part number wpw10195417
For model number IUD8555DX3
Hi Todd,
Thank you for your question. Yes, this part is compatible with your appliance. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kev
February 4, 2019
Just need the wheels. Need 4 each.
For model number Kdte204ess1
Hello Kev, Thank you for inquiry. We show that part number PS11750057 is for the lower dish rack roller. These are sold individually. Good luck with your repair!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
One of the rollers broke of on the lower dish rack
Snapped the old one off and snapped the new one on.
Barbara from BETHESDA, MD
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
13 of 25 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
one wheel came off a lower rack 2 wheel roller piece
push the 2 retaining clips back with my fingers and slide off the broken roller piece. Slide the new replacement 2 roller piece into place and push up until the retainer clips click and lock.
Dan from HUNTERTOWN, IN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original Rollers on lower dishracknwere broke
Pulled off the old rollers and snapped on the new ones. Easy as can be!
Broken lower rack wheels, tine pivot, and rail stop clip
Easy, 5 minute repair. Snap off old, snap on new. I looked up on the manufacturer's website and got the replacement part numbers, then ordered on partselect for half the price.
Still waiting for part. Shipped 23 April. FedEx rerouted from Northampton PA to Chicago 4/30. Scheduled to be delivered 5/11 by end of day. Plan is to replace assembly.
John from WALDORF, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The wheel broke
Removed the new part and forced fitted the new part.
Lorraine from CANONSBURG, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rack wheels fell off
Snapped old parts off, snapped new ones .
John from CAMILLUS, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old wheels were falling off
Very simple. Snapped the old wheel assembly off. Then snapped the new wheel assembly on. Done!
Dominic from AURORA, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheels would not stay on
I took the old wheel assembly off and snapped the new wheel assembly on. It’s that simple. Note the dishwasher rack needs to be empty. Very pleased with this site. Parts came super fast.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Leonard M - April 3, 2022
Verified Purchase
Easy snap on
Part arrived in 2 days, 10 minutes fix
★★★★★
★★★★★
Elizabeth T - February 15, 2022
Verified Purchase
Came fast-easy installation- works very well
Came in good time. Easy to install! Fit was perfect! Thank you!
★★★★★
★★★★★
Sam D - February 9, 2022
Verified Purchase
Great Part, Quick Delivery!
This lower dish rack wheel assembly is made by Whirlpool but it fit my Kitchen-Aid washer perfectly. It also cost about $15 less than the same part from the Kitchen-Aid website. I would highly read PartSelect.com.
★★★★★
★★★★★
James K - January 5, 2022
Verified Purchase
Part works great.
Part was all I needed. Works great
★★★★★
★★★★★
Rod M - January 1, 2022
Verified Purchase
Quick Repair took 5 minutes
This was a no brainer to order the part and install myself. I am handy and always look for ways to first try the repair myself. The service was excellent and as I first ordered the wrobg part it was returned easily and correct part received within a few days. Highly recommend Parts Select.
★★★★★
★★★★★
Carol M - November 11, 2021
Verified Purchase
Easy, exactly what O needed!
The part came in good condition.. no defects, not broken…
★★★★★
★★★★★
Terry L - November 6, 2021
Verified Purchase
Prompt Service
The part arrived promptly and installation was easy.
★★★★★
★★★★★
Joseph P - October 20, 2021
Verified Purchase
It was the right part and it fit perfectly
Easy repair.
★★★★★
★★★★★
Dwight H - September 21, 2021
Verified Purchase
EASY AS PiE!!
Works perfectly with the new part installed
★★★★★
★★★★★
Jeffrey E - August 19, 2021
Verified Purchase
easy repair
VERY pricey, rack now rolls onto door with no problem
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
