Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This gray plastic lower dishrack roller is a part for your dishwasher. It attaches to the bottom of the lower dishrack, allowing it to move in and out smoothly. If the lower dishrack stops moving in and out easily or preventing you from being able to shut the dishwasher door, inspect the dishrack roller for damage. The assembly includes 2 rollers and the bracket that attaches to the dishrack (parts are not sold separately). This assembly is sold individually, so you will need 4 assemblies to replace them all in your appliance. For this easy repair, start by removing the lower dishrack from the appliance and set it on the counter. Use a screwdriver to pry off the old roller assembly from the lower tabs. Align the new part on the dishrack by snapping it in place.
Door won’t close | Door latch failure | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
Part# WPW10195417 replaces these:
AP6016764, W10195417, WPW10195417VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
143 Reviews
4.7
Filter By Rating:
5 Stars
118
4 Stars
16
3 Stars
6
2 Stars
0
1 Star
3
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Scott W D - February 14, 2025
Verified Purchase
Easy repair
Part is brand new, easy replacement, works like new
★★★★★
★★★★★
Charles S - May 3, 2025
Verified Purchase
Easy to install and works great!
This is my first purchase from your store and it worked out great!
★★★★★
★★★★★
William L - January 27, 2018
Verified Purchase
Exact match, easy to install
The part was exactly what I needed. It was quite easy to replace the broken one.
★★★★★
★★★★★
Colin A - January 25, 2018
Verified Purchase
Easy repair
Part came quickly in good shape.Easy install machine working lioke new
★★★★★
★★★★★
Eric L - June 5, 2023
Verified Purchase
For a person who knows next to nothing about repair, this was a super easy fix!
First, it should be noted that my repair knowledge is/was minimal prior to ordering these wheels.
Now, a piece of advice from a novice: Take the extra few seconds to plug your model number in at the start to avoid ordering the wrong items and shipping things back. Yup ... did that because "Of course I know which part I needed" ... I didn't.
Thankfully the customer service people are phenomenal and helped fix my confusion, aka teach me to read the suggestion of putting in my model number before ordering.
As far as ordering and replacement goes, a suggestion from me. If your wheel(s) wore out naturally and you are thinking of ordering 1 of these ... DON'T. Save yourself the shipping costs and order 4 of these from the get-go. Disregard if it isn't general wear that caused your wheel to fail.
Best practice in removal of the old wheel (to prevent you from injuring your hand ... like me ....) use a flathead screwdriver or other punch type tool and a hammer or mallet to break off the 2 locking buttons holding the wheel in place. Attempting to pry them back, while pushing the wheel casing out was a bit of a failure on my part.
When putting the new wheels in, it was as simple as just snapping them in place and done. The wheels work wonderfully!
★★★★★
★★★★★
William S - September 28, 2018
Verified Purchase
Easy repair
Received part very quickly.. THANK YOU
★★★★★
★★★★★
Claude L - June 16, 2021
Verified Purchase
easy repair
I got exactly what I wanted. The repair went easily.
★★★★★
★★★★★
Alfred S - January 31, 2018
Verified Purchase
Easy repair
The pair was in great condition and easy install.
★★★★★
★★★★★
James T - July 23, 2021
Verified Purchase
easy repair
QUICK delivery FITS PERFECTLY
★★★★★
★★★★★
Kathlynn B - April 10, 2020
Verified Purchase
Worked as expected
No issues installing. Perfect replacement for our diswahser wheels which have all fallen apart.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 21 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Lower Dishrack Wheel Replacement
Simply take out the lower dishwasher rack, grab a pair of pliers and gently pry the old assembly off and snap the new assembly into place. It's very easy.
Jeff from LAS VEGAS, NV
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old wheel assembly broke
locate lock tab and gently press slide off the old assembly. align and slide the new assembly on.
the lock tab is sometimes hard to push in, if you struggle with pushing it you can either break it off the old assembly or use a small flat head screwdriver to gain leverage.
Mary from NEENAH, WI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A wheel on one of the bottom rollers was falling off
I give you a 5-Star customer review.
When the button holding one of the rollers in place fell off, I was lost, didn't know what to do. Then I found you online and called, there was virtually no waiting time on hold, and a very helpful representative quickly found the correct part and ordered it for me. It arrived in only 2 da
... Read moreys! Removing the old roller assembly with a screwdriver was a easy, it took 2 seconds. Snapping the new one into place was more difficult -- it took me about 5 minutes to figure out how to do it, and an instruction diagram would have been helpful, but that was a minor inconvenience.
I cannot thank you enough. Excellent service! Definitely 5-Stars!
Read less
Joel from NEW YORK, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
If I can do it, you can do it.
Replacing the rear wheel assembly isn't as easy as replacing the front, which took 5 minutes. You have to align the tine row, so it takes a few minutes more. But I'm a tiny woman with long nails, and if I can do it, you can do it!
Just watch the video, follow the directions, and you can't go wrong.
Ellen from GREENWICH, CT
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel assembly falling off x4
Popped damaged/worn wheel assembly off, snapped new ones in. Easy peasy
All wheels on lower dish rack wheel assembly were broken making the dish rack very difficult to push into dishwasher and remove it.
All four original wheel assembly's were difficult to pop out so used pliers and cutter to brake original part and remove it. Nothing on the original wheel assembly was needed for the repair so braking them off was ok. The new wheel assembly parts, with two wheels on each (4 total), two wheel assembly's on each side of the rack, were easy
... Read moreto install- no tools needed. Each wheel assembly just popped right into place.
Read less
Lance from New York, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
all rollers fell off. lower rack was hard to move when full
Purchase 4 roller wheel assemblies and installed them with only a screw driver to open the tangs. quick and easy and rack rolls smoothly inside the dishwasher. Rather expensive $58 per roller assembly and hopefully these last the lifetime of the dishwasher.
mike from WESTERVILLE, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced wheel assemblies on lower dishwasher rack
After finally getting the older wheels off, it was literally a snap putting the new wheel assemblies on. I still don't know the best way to get the old ones off, to be honest, but putting the new ones on was really easy.
Jeanne from COLLIERVILLE, TN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced lower dishrack wheel assembly
No instructions were given but I found a YouTube video of the repair and it took less than a minute to install.
Jeff from WEST CHESTER, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Absolutely no instructions whatsoever.
Never did the repair. Can't figure how to remove the old dishrack assembly and put in the new one. In addition, I still need three more since all the wheels are falling off.
linda from WEEKI WACHEE, FL
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
36 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lois
November 8, 2018
I only need the pin for the wheel assembly, one wheel fell off and i can't find the pin. Do they sell the wheel and pin separately? It seems rather costly for the entire assembly.
For model number KDFE104DWH1
Hi Lois, thank you for your question. Unfortunately no. The axle is not sold without the roller. We apologize that our prices are not as low as you expected. We base our prices on what we are charged by the manufacturer for the parts. We try to keep our prices as low as possible, but do also have to keep them at a level to help cover our costs. We hope this helps to explain the reasoning behind the prices! Good luck with your repair.
66 people found this helpful.
Was this helpful?
Thank you for voting!
Roy
October 13, 2017
Can you send wheels and tabs to hold them separately?
For model number w10195417 - part #
Hello Roy, thank you for contacting us. The wheels are sold separately from the rack, as well as the clips and tabs. Hope this helps!
27 people found this helpful.
Was this helpful?
Thank you for voting!
Betty
November 8, 2019
Do the wheels stay on? The ones i have now keep popping out.
For model number KDFE104DBL1
Hello Betty,
Thank you for your question. They are supposed to stay on the roller plate yes. If the wheels keep popping off, you would need to replace the entire roller since the wheels are not available separately. Hope this helps!
17 people found this helpful.
Was this helpful?
Thank you for voting!
Ruth
January 20, 2018
How does this part attach to dishwasher?
For model number W10195417 whirlpool wheels directions
Hello Ruth, Thank you for your inquiry. Align the adjustable tines with the middle slot in the roller assembly, then it should just snap into place on the rack. Although we do not have a repair video for this exact part number, I have included a link for a similar model to assist you. Hope this helps!
https://www.youtube.com/watch?v=7MBgy1xgfek&list=PLD984081941E1E8CD&index=190
9 people found this helpful.
Was this helpful?
Thank you for voting!
Susann
August 23, 2017
Have 3 year old KitchenAid dw. Told this part would let me replace 2 bottom rack wheels. One on each rt side wheel unit but is not a Kenmore. Will this part really work?
For model number KDFE104DBL0
Hi Susann,
Thank you for your inquiry. Yes, these parts are sold individually but they are the correct wheels for your lower dishrack according to your model number. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Donna
August 6, 2018
Can i buy two wheels and tabs for my dishwasher instead of the entire assembly
For model number Kdfe304dsso
Hello Donna, thank you for your question. Unfortunately, the wheels are only sold as an assembly of two per set which is part number Lower Dishrack Roller Part Number: WPW10195417. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jacob
December 16, 2017
Is the pin which holds the wheels on sold separately? If so, what is the part number? Thanks!
For model number KDFE304DSS0
Hello Jacob,
Thanks for your question. The pin is only included with the lower dishrack roller part.
I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Ed
May 5, 2018
How many units do you get?
For model number WPW10195417
Hi Ed,
Thank you for your question. It looks like in the part description above we have indicated that this lower dishrack roller is sold individually. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Todd
March 4, 2018
I need to replace the bottom rack wheel assembly. My dishwasher is made by Whirlpool and sold by ikea. Is this part compatible? Partselect number ps11750057
Manufacturer part number wpw10195417
For model number IUD8555DX3
Hi Todd,
Thank you for your question. Yes, this part is compatible with your appliance. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kev
February 4, 2019
Just need the wheels. Need 4 each.
For model number Kdte204ess1
Hello Kev, Thank you for inquiry. We show that part number PS11750057 is for the lower dish rack roller. These are sold individually. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dishwasher","title":"Dishwasher","url":"/Dishwasher-Parts.htm"},{"position":2,"name":"Wheel or Roller","title":"Wheel or Roller","url":"/Dishwasher-Wheels-and-Rollers.htm"},{"position":3,"name":"WPW10195417","title":"WPW10195417","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
