This detergent dispenser assembly is for dishwashers.
Detergent dispenser assembly holds the dishwasher detergent and rinses agent in covered compartments.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will not dispense detergent | Door latch failure | Not cleaning dishes properly | Door won’t close
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marla
September 21, 2017
The soap dispenser doesn't latch.Latch is broken.Would it be something i could fix if i had the part?
For model number WDT710PAYM0
Hi Marla,
Thank you for your inquiry. If the latch is broken on your detergent dispenser then you will need to replace the dispenser as individual parts for it are not available. I hope this helps. Thank you and have a great day!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Duncan
September 28, 2017
I ordered a replacement soap dispenser but it did not come with instructions on how to replace. Could you pleae e-mail me directions. Thank you.The p/n i rec'd is wpwpw10195175 thank you duncan debond
For model number dish washer WDF530PLYB3
Hi Duncan,
Thank you for your inquiry. There is a video on our website that you can reference on how to install the detergent dispenser. You will find the video under part number PS11746408. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jane
November 15, 2017
When i add rinse aid to the rinse aid part of the soap dispenser it leaks when i simply close the door. The soap dispenser was installed a year ago by a professional and probably hasn't worked since then - not sure of the timing - crazy busy household. Could it be that it was not properly installed?
For model number KUDS35FXSS1
Hi Jane,
Thank you for your question. It could be that, or it could be that the dispenser that he put in was defective in some way. I would suggest trying to reinstall it first. If that does not fix the issue you may need to get that part replaced again. Here is a general video that will show you how to do that installation: https://www.youtube.com/watch?v=jCBjkjAQRFM . I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Cathy
December 10, 2017
The soap dispenser latch broke off...can it be replaced?
For model number WDF530PLYW0
Hi Cathy,
Thank you for your question. To replace it you would have to replace your dispenser entirely. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jane
November 15, 2017
The rinse aid dispenser does not hold the rinse aid. I fill it and after one wash it is empty.
For model number KUDS35FXSS1
Hi Jane,
Thank you for your question. It is likely that you will have to replaced your dispenser. In most cases where this happens, your dispenser has failed. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Keely
August 9, 2017
Detergent door is not opening to release all of soap. Dishes also seem cloudy like maybe Jet dry it's not being dispensed. Do you think i need to replace the entire dispenser mechanism or is it just the pinned i need to work on
For model number Wdf530paym3
Hi Keely,
Thank you for your inquiry. Yes it does seem like it might be your dispenser that is the problem. However I would suggest testing the part with a multi-meter first. Just to see if it is in fact causing your issue. Good luck!
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
November 7, 2022
My new Dispenser looks to be and fits just like the one it is replacing except for one big problem. The electric connectors (plastic) will not mate from my dishwasher (Kenmore 665.13042K115) to the new Dispenser. I will be seeking the correct part or a refund. Thank you.
For model number WPW10195175
Hello David, thank you for reaching out to PartSelect. According to our research, the dispenser, part number PS11750038, is compatible with your model. We have attached a helpful installation video. We hope this information is useful.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Daniel
October 4, 2022
What is the part number for my detergent dispenser?
For model number KDFE104DBLO
Hello Daniel, thank you for contacting us. We have researched the model you have provided and have found that the part you are looking for is part number PS11773088. If you would like assistance placing an order, please contact customer service. Good luck with your repair!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dispenser was not dispensing
I first turned the power off to the dishwasher. I then used the star bit to loosen the screws on the sides and top. Note that the 4 top screws are longer than the side screws. Once the screws were loose I used a clamp on each side to hold the door cover in place. Once the screws were removed, I released the clamps, raised the door then lifted the outer cover off. I then peeled the insulation back from the top to expose the dispenser. I used a small socket to remove the screws for the dispenser. I released the plug with a small slotted screw driver. I then exchanged the dispenser with the new unit being careful to correctly reinstall the black cover over the top. I reinstalled the door cover, being careful to tuck the insulation back in place. I then installed the screws using the clamps to hold the door in place during the reinstall.
Chris from MANSFIELD, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Wrench set
9 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
soap dish would not lock
12 screws remove door outside panel unplug wire remove 6 mounting screw remove old unit put new unit in place put 6 small mounting screws back plug wire in put front door panel in place put 12 door screws in your done now you can start and test run
philip from THE VILLAGES, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
soup dispenser was broken
went to utube
Mitchell from THONOTOSASSA, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
it was the detergent dispencer, we had to install it twice. and it still does not work
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
GREGORY N - September 4, 2022
Verified Purchase
Perfect Instructions! Success!
Our old dispenser would no longer stay closed. I guess the plastic degrades over time. The installation went very smoothly, except that nothing indicated to remove the plastic guard on the electrical connection. Thankfully my wife noticed that it could be removed and then the connector matched perfectly! Thanks for making me look so good.
★★★★★
★★★★★
Devin V - June 20, 2022
Verified Purchase
Everything was very easy
Everything was very easy From finding the part to getting the part in online help with how to install it.
★★★★★
★★★★★
Michael D - September 25, 2020
Verified Purchase
Easy repair, part fit perfectly
Fast delivery, part was a perfect fit and dishwasher is working perfectly.
★★★★★
★★★★★
Robert F - May 8, 2020
Verified Purchase
Easy repair. Saved lots of money
Perfect part. Darker that the inside of my dishwasher but looks just fine.
★★★★★
★★★★★
MICHAEL R - February 27, 2020
Verified Purchase
It was a simple repair
The part was in great condition and it was pretty easy to install.
★★★★★
★★★★★
Brenda B - November 14, 2019
Verified Purchase
Great part, worked as expected
It was the correct part, put it in with ease and works great. Thank you.
★★★★★
★★★★★
Christopher H - June 26, 2019
Verified Purchase
Part was installed in under 20 minutes
Part was cheaper than purchasing through local parts supply house.
★★★★★
★★★★★
Dan B - June 15, 2019
Verified Purchase
Easy repair
Easy to install using YouTube video
★★★★★
★★★★★
Michael C - March 5, 2019
Verified Purchase
Easy repair
The part was an exact replacement.
Works well glad I did the repair myself.
Only thing people should know is you will need a special torx bit which can be purchased at any of the DIY stores
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
