This part is also known as a float switch. This float switch, when activated, stops the flow of water into the dishwasher.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Dishwasher Overfill Control Switch
Troubleshooting
This part fixes the following symptoms:
Leaking | Will not fill with water
This part works with the following products:
Dishwasher, Dryer.
Part# WPW10195039 replaces these:
AP6016738, W10195039, W10734532
Customer Reviews
Average Rating:
★★★★★
★★★★★
6 Reviews
4.5
Filter By Rating:
5 Stars
5
4 Stars
0
3 Stars
0
2 Stars
1
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Marshall F - August 26, 2022
Verified Purchase
Fairly easy repair
The part fit perfect for my dish washer. I cannot improve upon the on line instructional video that accompanied the part purchase.
★★★★★
★★★★★
Scott D - April 29, 2021
Verified Purchase
Awesome service
I ordered many parts through Part Select and as always, fast, factory oem parts at a great price!
★★★★★
★★★★★
Jay L - April 21, 2021
Verified Purchase
Easy repair.
Easy to follow video. Got it fixed fast
★★★★★
★★★★★
Byron W - February 20, 2021
Verified Purchase
Leaks
Decent priced. Helpful information
★★★★★
★★★★★
Dan L - April 25, 2019
Verified Purchase
Never again
I ordered this part and it works like it should but the shipping is extremely slow. It took 12 days for it to come in. This is rediculious
★★★★★
★★★★★
James N - February 7, 2018
Verified Purchase
Fast service!
Part was perfect fit, arrived fast and fixed the problem.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
DISHWASHER WOULD NOT FILL WITH WATER
Unscrewed bottom panel of the dishwasher and simply replaced the bad control switch with the new one.
TRACEY ANN from BRICK, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water fill overflows at times
thought it could be due to the overfill control switch,so ordered one and replaced one in the washer. However, it did not solve the problem. Having a repair company coming to look at the dishwasher. Tipped the washer on its back and switch was readily accessable. Only had to open plastic covering over the switch, disconnect the wires and
... Read moreinstall new switch and reconnect the wires.
Read less
Dennis from AUBURNDALE, WI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
6 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
24 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jennifer
November 6, 2018
During normal cycle a lot of water is coming out the bottom of the door. This doesn't seem to happen on 1 hour cycle. Would this be a problem with the overflow control switch or another part? Thanks!
For model number WDF760SADM0
Hello Jennifer, thank you for your question. Yes, the float switch (also known as the overfill control switch) helps control the water level. If it goes bad, it is possible that the dishwasher may flood or leak. You may want to test it with a multi-meter to see if it has continuity and replace it if it does not show continuity. I hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Andrew
October 25, 2017
What does the overfill controll switch do
For model number KUDE48FXSS5
Hi Andrew,
Thank you for your question. The overfill switch, or float switch as it is sometimes called, makes sure that your appliance does not over fill with water. It also helps the drain pump know when the water has been all drained out of the machine. I hope that helps. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Mario
December 23, 2017
My Whirlpool gold series dishwasher keeps on filling and draining it will not go to wash cycle. What do you think the problem is?
Hello Mario,
Thanks for your question. This will vary from model to model for the exact parts, but you will want to check the water inlet valve with a multi-meter for continuity, replacing it if it shows no continuity. Check the wash arm impeller inside the pump and motor, as well as considering the idea that the pump may be bad. Examine the spray arms to see if any of them are clogged and clean them if needed. Test the float switch as well with a multi-meter for continuity and replace it if it does not show continuity.
I hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Nicole
December 28, 2017
The dishwasher will not fill. Can you help?
For model number WDT720PADM
Hello Nicole,
Thanks for your question. Your water inlet valve may be clogged or defective. It could be worth considering replacing it. Your problem may also be the float switch, so replace that if the inlet valve is fine.
I hope this helps.
Machine overfills and leaks at front of door. Float switch tests good. Fill valve tested good but replaced because of some rust stains on screen. Float moves freely. Water drains normally when cancelled. What could be the solution to this problem?
For model number Mdb4709pab3
Hi Wayne, Thank you for the question. I suggest replacing the Overfill Control Switch, PartSelect Number: PS11750031.Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Dennis
November 24, 2017
If the overfill control switch is bad, will it cause the washer to overfill at times, and cause water to gush out the bottom of the door?
For model number MDB4949SDM
Hello Dennis,
Thanks for your question. Yes, the float switch (also known as the overfill control switch) helps control the water level. If it goes bad, it is possible that the dishwasher may flood or leak. You may want to test it with a multi-meter to see if it has continuity and replace it if it does not show continuity.
I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Heather
June 15, 2023
DISHWASHER - MAYTAG MODEL MDBH979SAM0
Type 577-1
Hi - we had water leaking, and at first it seemed to be the water inlet valve, and we replaced that. New part seems good, no more leaks detected there. Then I noticed a drip from the water inlet hose, and replaced that. No more leaks there. However, water was still (or now) pouring through the bottom of the front door (machine was out from its usual place under cabinet, on tile floor), and at that point I suspected the door gasket, and replaced that. However, issue was not fixed, so we then replaced the front door lower seal as the old one had some hard water build up I couldn't remove (PS11755651), and we also took out the lower (and upper) wash arm parts, cleaned those, and cleaned the upper portion of the sump pump (accumulator and filter, and top of sump pump) of gudge. And, then did our best to LEVEL the machine, which stopped the gush of water, but there is still water filling up in and then draining out of the metal tray at the bottom of the door, (above the white padded material) and coming past the door's lower seal.
For model number MDBH979SAM0
Hello Heather, thank you for the question. Since you have replaced and cleaned the most common parts that can cause leaking, we would recommend checking the float switch, part number PS11750031. It shuts the water fill valve off if the water level gets too high before the timed fill cycle ends. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Wayne
November 30, 2017
You suggested that I replace the overfill switch. I stated in my previous question that the float/overfill switch tested good. I checked it with a continuity tester and also operated it manually in the machine. What else in the system will cause this problem? Thank you for any suggestions you may have.
For model number Mdb4709pab3
Hello Wayne,
Thanks for your question. You may wish to check the circulation pump and motor. It is rare for this part to be causing such leaking, but you have found that most of the other parts test well, so it may be worth examining the pump and motor as well.
I hope this helps.
Unit does not wash at all. I start it, let it run for 10 minutes, open it, and all the dishes are still dry. I hear a humming sound lasting about 30 seconds, it stops for a few seconds and resumes, repeating, but apparently no water goes through. I let it run a complete washing cycle, and after it is finished, soap had been dropped intact over the dishes, but was intact, not even wet, reusable.
possible causes? Thank you in advance for your help.
For model number KUDS30SXSS4
Hi Gustavo,
Thank you for your question. If the dishes are not getting cleaned because there is no water entering the dishwasher and you are hearing a humming sound, it sounds like the issue is with the water inlet valve. A component in the water inlet valve may have failed and it will need to be replaced. The water inlet valve is usually located behind the lower access panel. Remove the lower access panel in order to locate the inlet valve. Once you have located it, visually inspect the water inlet valve for any signs of cracking, wear, or other damage. If any issues are found during your inspection, you will need a replacement water inlet valve. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sean
January 4, 2020
My dishwasher is leaking during wash cycle, and the water is leaking out at the overfill control switch. I was going to replace the switch, but is this a different problem with a seal/gasket inside instead? Thanks for your time!
For model number IUD8555DX0
Hi Sean, both the switch and gasket could the problem, I would inspect the seal for damage and go from there. Thank you for your question and good luck with your repair!
