Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mark G - August 17, 2019
Verified Purchase
Just the right part, and speedy delivery
Just the right part and speedy delivery.
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
10 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
November 24, 2017
How does the float come off, and do float parts such as overflow control switch come with directions on how to remove old float & overflow switch and install new ones?
For model number MDB4949SDM
Hi Dennis,
Thank you for your inquiry. We get our parts prepackaged from the manufacturer, so they may or may not include instructions. There is a video on our website that you can reference on how to install the float. You will find the video under part number PS2344786. I hope this helps. Thank you and have a great day!
5 people found this helpful.
Was this helpful?
Thank you for voting!
GH
April 3, 2018
My Maytag is occasionally leaking from directly under the float switch. Per an answer i received on the item page for a gasket (ps11746142), i have ordered this replacement valve and a backup gasket. I assume the dw has to be removed for installation?
For model number MD8959SBS
Hi GH,
Thank you for your question. We do have an installation video that will show you how a float switch is generally installed: https://youtu.be/xZY_PIp1YRw . I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Russell
August 27, 2021
Red drain light stays on and 2 second count down blinks?
For model number 66514573N612
Hello Russell, Thank you for the question. Depending on what cycle the Red Light and Countdown is in the display, we suggest checking the Drain Hoses and the Pump for a blockage or clog preventing it from properly draining. We hope this helps!
My dishwasher is leaking from the float valve, and this time its not the gasket under the nut (replaced that already) as it was a large leak. Is there an o ring on the float that stops water from going down the float tube and running out onto the floor??
For model number KUDE70FXSS3
Hi Don, thank you for your question. No there is not. The gasket is the one underneath of the nut. No water at all should be getting passed that gasket and into the electrical parts of the float switch. It sounds more like you are getting a leak from somewhere else in your appliance. I would suggest taking a look at your water inlet valve, and your sump parts to see if the leak is coming from there. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Vickie
October 17, 2022
Water Leake. Seems to be coming from door area put on a new door seal washed 1 load dishes worked no leaks. Washed 2nd load leaking a lot. Turned dishwasher off and tub was full of water . Leaking seems to be near the Float area the water seems to be in the float area. Does not happen every time we wash dishes. Just at random times.
For model number MDB4949SDZ0
Hello Vickie, thank you for reaching out. We have researched your model and found that the likely issue could be in the overfill control switch, part number PS11750031. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps!
I'm trying to troubleshoot a leak along the front edge of my machine. I removed filter, cleaned everything out, including chopper. I had hard water so there was a lot of mineral build up, I've put in a softener system a few months ago to rectify this. This leak was maybe every 8-10 loads, but recently it's been every time and pretty substantial. After cleaning just now a ran a few rinse cycles, first two fine, third-leaking again. I'm not sure how much water the machine should allow, I'm thinking maybe an issue with the float. Doesn't seem to have a mechanical issue, it moves freely. How would I know if it's allowing too much water? Is there something else to check? Pump seems to work ok, water drains efficiently into the sink as far as I can tell.
For model number KUDC10FXSS6
Hi Jeff, thank you for the great question. According to our research, you may need to check the following parts to fix the issue: door seals, part numbers PS11755651, PS12348515, PS11731683, and water inlet valve, part number PS11752927. We hope this solves your problem!
I have error code 6. 4. My dishwasher has power. Which part do I need to fix that ?
For model number KDTE334GPS0
Hello Patricia, thank you for getting in touch. According to our research, the error code 6-4 means that the float switch in the dishwasher has failed. You may need to replace it to fix the issue. The float switch for your model is part number PS11750031. We hope this solves your problem!
Dishwasher seems to always have water at the bottom and is leaking. I understand a bit of water will always remain. Hoses and filter cleaned. Float? Drain pump? Control panel?
For model number WDF560SAFM2
Hello Tyler, thank you for getting in touch. Based on the description that you have provided, we would recommend checking the drain pump, part number PS11738151, to fix the issue. We hope this solves your problem!
Leaking somehow down the shaft of the float and out the bottom of the float assembly. Unit will hold water for hours without leaking, so its not the float gasket. When it does leak it isn't just dripping, it's quite a bit of water. I have taken apart and inspected the float and the float housing and nothing looks abnormal. Any help would be appreciated. Thanks
For model number WDTA50SAHB0
Hello Jason, thank you for getting in touch. Based on the description that you have provided, we would recommend checking the water inlet valve, part number PS11752927, to fix the issue. We hope this sorts out your problem!
I changed door seal and gasket around tub and my dishwasher still leaks out the bottom left side of door. Seems like float switch is working. It seems to start leaking approximately 30 minutes into cleaning cycle. Thanks for any help
For model number WDTA50SAHZ0
Hi Tom, thank you for getting in touch. We have concluded that the issue is with the drain pump, part number PS16744935. We would suggest checking it to solve the problem. Glad to be of help!
