This is an ice maker mold and heater assembly for a refrigerator ice maker. It is used with modular style icemakers and is located in the freezer section of the refrigerator. This ice mold is flake resistant which prevents the coating on the mold from flaking into the ice cubes when the ice mold begins to wear. The ice mold forms the ice cubes and the heater allows the ice cubes to fall from the ice mold to drop them into the ice bucket. You will need to remove the ice maker from the refrigerator to access the mold and heater assembly. This is a genuine replacement part.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kris C - September 26, 2021
Verified Purchase
Normally easy to repair, But leave it to professionals.
MY makers ice mold was leaking, so I ordered a new one. I received the part and proceeded to dismantle the old unit. Screws holding the face on were SO HARD to remove. Tried several sized screwdrivers, and stripped the head while removing. THEN trying to replace them was JUST as difficult and then getting them ti tighten ALL THE WAY down was impossible. I thought I got em fully screwed in , but the ice maker has quit making ice all together
Caution: If your maker is old, may want a professional to replace...
I will now have to replace the entire unit, just to get ice.
Savings: $0
Cost of ice mold: $~80
Cost of new unit: $125
Total COST $300
Is it worth it?? Was not to me.
★★★★★
★★★★★
Brian K - August 8, 2021
Verified Purchase
Quick fix
Part came fast & went right in.
★★★★★
★★★★★
Ken P - January 20, 2021
Verified Purchase
EASY TO DO
PART WAS AS EXPECTED
★★★★★
★★★★★
Stephen P - September 18, 2020
Verified Purchase
Works great
The original part was leaking due to the coating wearing off, water was leaking on the ice bin below making a solid chunk. Watched the video sent with the confirmation e-mail on how to replace the worn out part and it was an easy repair. The model refrigerator in the video was not the same as mine but it was easy the figure out the procedure. Threw out the first two ice batches and now it works perfectly.
★★★★★
★★★★★
WAYNE K - December 28, 2019
Verified Purchase
ice mold
The ice mold came in good shape and was easy to install it is working great.
★★★★★
★★★★★
Sarah D - September 8, 2019
Verified Purchase
A perfect replacement and the ice maker works great!
Just what we needed. Literally we have no experience repairing appliances and we're not handy at all.
Using PartSelect and watching YouTube videos about how to replace the ice maker probably saved us hundreds of dollars and certainly extended the life of our 15+ year-old fridge.
I wish the ice maker was a little less expensive, but the alternative would be calling a repair person and probably paying $300 or more so I can't complain.
★★★★★
★★★★★
Les M - March 19, 2019
Verified Purchase
Fast delivery
Arrived on time
★★★★★
★★★★★
Richard L - January 30, 2019
Verified Purchase
Great part worked as I expected.
Repair video is a general view of the ice maker and the repair. Your particular refrig and the placement of the ice maker may vary from the video. Pay particular attention to the harness and the manner in which the moving parts fit together into the ice mold. DO NOT FORCE ANY OF THE PARTS INTO PLACE. All of the ice maker parts should and will reinstall easily if u take care to note each as u remove them from the broken unit. I would suggest applying a small amount of heat to the conductive adhesive to soften it before pressing the control unit into place and securing with the screws.DO NOT OVER HEAT IT.
★★★★★
★★★★★
Martez B - November 6, 2018
Verified Purchase
Worked like a charm
The part came quickly as advertised. Was not exactly the same as the OEM but fit perfectly just the same.
The live tutorial was spot on and saved me a lot of time and aggravation. This process saved me from spending $2K on a new refrigerator.
★★★★★
★★★★★
Alvin D - October 9, 2018
Verified Purchase
Easy repair
Received the part promptly and was packaged in such a way that it would be in perfect shape to install immediately.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 25 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Leaking water
Watched the video...easy!
David from Valencia, CA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker wasn't working (water line frozen) and showed extensive damage to the metal basin.
Unplug fridge, turn off water to fridge Uninstall ice maker (some tools needed) Remove ice buildup inside water line
Purchase new ice maker and installed it while watching a youtube video of how to do it. Once installed, turned on the water line and plugged in fridge.
Sarah from UNIONTOWN, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking in ice bucket causing to freeze big chunk of ice and making ice maker inop
turned water off to ice maker unpluged fridg while doing repair which was such short time everything was ok removed 3 1/4 hex screws holding ice maker in position while holding ice maker in hand unpluged wiring connection for it removed old ice mold which coating had come off of which was very simple 2 philips screws which are recessed on
... Read more control unit then gently wiggle assembly apart paying attention to how all the tray parts went together then reinstalling same way as they were remove very simple repair anyone should be able to do
Read less
gary from clearmont, MO
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Flaking ice mold.
Easy, just removed the ice dispenser and the left support for the dispenser so I could get to the bottom screw easier. Three screws held the mold in place. The bottom screw had to be removed completely, but I just loosened the two top screws and lifted the mold out away from the wall and then disconnected the wiring. The end cover snapped
... Read more of easy with a screw driver. I then removed the three screws holding the motor. then pulled the motor off.(the next square part under the cover. I did this before I realized that I could use a small screw driver and stick it into the holes to remove the mold and not mess with the outer screws. After I removed the mold, I replaced the new mold into position, without putting the white forky looking part back on so I had to take the two screws out and put the part in place before attaching the motor back to the mold. Everything went back together just like a charm. The ice maker is working good, easy job. Gone golfing now.
Read less
Joseph from Benbrook, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The coating on the ice mold came off and ice wouldn't come out.
I removed the ice maker, saw the problem, took the ice maker apart and ordered a new mold. I reassembled it with the new mold and it now makes ice but the control arm remains up after each ice dump. I plan to take the ice maker back out when we leave (we are snow birds in Florida) and see if the arm is properly placed.
Gary from Fort Meade, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice mold leakage
The first thing I would like to say is thank you Parts select for a very fast delivery. It was within 24 hours I received my component. The installation went very well. The main thing is to take each part off the old mold, one at a time and install it onto the new mold. Make sure to look at each part as it is mounted to the old mold an
... Read mored re install them the exact same way. Just be gentle with some of the plastic pieces because they are fragile in certain areas. It will take a few hours for everything to start working properly. Thanks again Parts select. Good luck and God Bless.
Read less
Jason from Leo, IN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One screw stuck
Had to widen screw access hole in motor frame enough to use the phillips bit with my 12V impact driver. That worked perfectly. It took an extra two hours of trying to break the screw free without stripping it and figure out what to do when it wouldn't budge. Once I got the screw out the fix went quick and the ice maker now works great. If
... Read more you have a coroded screw go straight to the impact driver.
Loosen to screws under ice mold and unplug power cord from icemaker.Lift out complete unit. Remove cover on ice maker,then 3 screws on end plate and remove end plate. Remove 2 screws that hold ice mold to frame. Make sure that the thermostat is moved to new mold. Reverse order to install new mold.
Joseph S from Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice getting stuck in icemaker
Removed icemaker found ice mold protective layer coming off. Replaced ice mold and working great. Online graphic very detailed and easy to determine part needed. Easy and great delivery. Highly recommended for future repairs.
Mariano from Miami Beach, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker motor was buzzing. Unable to discharge ice.
I first turned off the refrigerator. I then used a hair dryer to melt and release the ice by warming the bottom of the mould. Then I turned the fridge back on and let the icemaker discharge the ice. I then turned off the icemaker and ordered the new part. I unplugged the fridge, removed the icemaker (three screws and an electrical conne
... Read morection). Then I replaced the heater/tray with the new one and turned everything back on. Within a couple of hours we began having ice again.
Read less
David from Sarasota, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pat
January 25, 2018
Does this part come with your replacement icemaker?
For model number 10657285790
Hello Pat, Thank you for your inquiry. Yes it does, part# 4317943 ice maker replacement comes with the ice mold, you would have to order the bail/shut off arm separately part# WP2304354 Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Don
November 19, 2018
My ice machine does not make ice or get water to it will this fix it
For model number MFI2269vew
Hello Don, Thank you for the question. I suggest filling the ice maker with a glass of water. If it makes ice as normal you may need to replace the Water Inlet Valve, PartSelect Number: PS2069865. If it still does not make ice, you may have a detective ice maker, PartSelect Number: PS11749922. Unfortunately the Ice Mold will not fix this issue. Hope this helps, good luck with this repair!
My ice maker begin making a clicking noise. I found that there was ice cubes blocked.I removed the old cubes and tried operation again this time water froze in tray. i removed ice maker defrosted and reinstalled. no luck have same problem. the video's that i have seen all show the ice maker for this model mounted inside the frig my ice maker is mounted in the top of the door. what model ice maker would i need and will that correct problem?
For model number wsf26c2exw01
Hi Jerry, thank you for your question. I have linked the correct ice maker for your appliance down below. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.
Hello Warren, Thank you for the question. Unfortunately the ice Maker water level can not be adjusted. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Catherine
June 29, 2021
My ice maker works but the ice cubes are fused together and it appears that a small amount of water is leaking into the ice bucket as the cubes are all frozen to the bottom of the bucket. How do I correct this?
For model number 111.7302
Hello Catherine, Thank you for the question. Insufficient cooling can cause ice to melt and clump together. In order for us to locate the correct parts and repair information we will require the full model number of the unit. 111.7302 is showing to be incomplete. Once you have located the full model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
August 11, 2022
I need to locate the ice maker reset button, where is it?
For model number WRS321SDHZ05
Hello James, Thank you for the question. The Reset Button is on the underside of the Ice Maker on the bottom of the front cover area. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Mark
March 18, 2020
Icemaker rotates but does not fill with water
For model number 10655384400
Hello, Thank you for your question. I would recommend looking into the water inlet valve. If you are not getting any water it could be an issue with that. We hope that helps.
Was this helpful?
Thank you for voting!
Jesse
July 31, 2019
Ice maker quit working. It dispenses water but the ice can’t make it out of the mold. Heating element maybe?
For model number 106.45423801
Hello Jesse, we are not technicians however we would recommend checking the ice door kit part number PS11723180. Thank you for your question and have a great day!
