Maytag/Maytag_Thumb/JEXCUVQ2.gif
See part 9 in the diagram
Replacing your Kenmore Refrigerator Ice Mold play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Ice Mold

★★★★★
★★★★★
13 Reviews
$ 132.17   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11749915
Manufacturer Part Number WPW10190929
Manufactured by Whirlpool
Product Description

Ice Mold Specifications

This is an ice maker mold and heater assembly for a refrigerator ice maker. It is used with modular style icemakers and is located in the freezer section of the refrigerator. This ice mold is flake resistant which prevents the coating on the mold from flaking into the ice cubes when the ice mold begins to wear. The ice mold forms the ice cubes and the heater allows the ice cubes to fall from the ice mold to drop them into the ice bucket. You will need to remove the ice maker from the refrigerator to access the mold and heater assembly. This is a genuine replacement part.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking | Ice maker not making ice
This part works with the following products:
Refrigerator, Ice Maker.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Maytag.
Part# WPW10190929 replaces these:
AP6016623, 14211407, 2255835, 627815, 627997, 628189, 628228, 628315, W10122527, W10190929
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Pat
    January 25, 2018
    Does this part come with your replacement icemaker?
    For model number 10657285790
    Hello Pat, Thank you for your inquiry. Yes it does, part# 4317943 ice maker replacement comes with the ice mold, you would have to order the bail/shut off arm separately part# WP2304354 Hope this helps!

    6 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Don
    November 19, 2018
    My ice machine does not make ice or get water to it will this fix it
    For model number MFI2269vew
    Hello Don, Thank you for the question. I suggest filling the ice maker with a glass of water. If it makes ice as normal you may need to replace the Water Inlet Valve, PartSelect Number: PS2069865. If it still does not make ice, you may have a detective ice maker, PartSelect Number: PS11749922. Unfortunately the Ice Mold will not fix this issue. Hope this helps, good luck with this repair!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Jerry
    October 23, 2019
    My ice maker begin making a clicking noise. I found that there was ice cubes blocked.I removed the old cubes and tried operation again this time water froze in tray. i removed ice maker defrosted and reinstalled. no luck have same problem. the video's that i have seen all show the ice maker for this model mounted inside the frig my ice maker is mounted in the top of the door. what model ice maker would i need and will that correct problem?
    For model number wsf26c2exw01
    Hi Jerry, thank you for your question. I have linked the correct ice maker for your appliance down below. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Warren
    February 3, 2020
    Can the water level in the ice maker be adjusted?
    For model number AFI2538AES
    Hello Warren, Thank you for the question. Unfortunately the ice Maker water level can not be adjusted. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. We hope this helps.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Catherine
    June 29, 2021
    My ice maker works but the ice cubes are fused together and it appears that a small amount of water is leaking into the ice bucket as the cubes are all frozen to the bottom of the bucket. How do I correct this?
    For model number 111.7302
    Hello Catherine, Thank you for the question. Insufficient cooling can cause ice to melt and clump together. In order for us to locate the correct parts and repair information we will require the full model number of the unit. 111.7302 is showing to be incomplete. Once you have located the full model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Mark
    March 18, 2020
    Icemaker rotates but does not fill with water
    For model number 10655384400
    Hello, Thank you for your question. I would recommend looking into the water inlet valve. If you are not getting any water it could be an issue with that. We hope that helps.

    Was this helpful?
    Thank you for voting!
    Jesse
    July 31, 2019
    Ice maker quit working. It dispenses water but the ice can’t make it out of the mold. Heating element maybe?
    For model number 106.45423801
    Hello Jesse, we are not technicians however we would recommend checking the ice door kit part number PS11723180. Thank you for your question and have a great day!

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Kenmore Refrigerator Ice Mold

      Replacing your Kenmore Refrigerator Ice Mold play video
      Customer Repair Stories
       Average Repair Rating: 3.4 / 5.0, 25 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      No Ice
      Heating element broke and fried the rest of the parts had to take out the bad parts and put in the new ones and it worked. i have fixed this problem three times now.
      Other Parts Used:
      Cycling thermostat Motor Housing Ice Maker Wiring Harness
      • ian from estero, FL
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers, Wrench set
      30 of 72 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      The black plastic or teflon coating on the ice mold was coming off in flakes and freezing in the ice cubes
      I took out the ice collection box and auger to get access to the three screws holding the ice maker assembly against the left wall of the freezer. You can use a screwdriver or a nut driver. I then unpluged the assembly and wiggled it loose from the water fill tube. I assumed that unplugging the unit would disable the water valve but I put a plastic tub under the fill tube just in case. I studied the assembly on the kitchen table for a few minutes before I disasembled it. After removing a snapon plastick cover I removed three or four screws on the gearbox and was able to pull and wiggle the parts apart. The heater contacts have rubber O rings so you have to be firm pulling the mould out of and into the gearbox mount. Make sure it is fully seated. On reassembly note that the ice kicking arm is notched so it fits into the gearbox only one way and it helps to have it in position when you screw the gearbox back on. I also found the plastic ice guide that fits on top of the mold a little awkward in snaping back together. Make sure its fingers space evenly with the ice kicking arms.
      • Roger from Sunnyvale, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver, Screw drivers
      29 of 39 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Ice maker mold was cracked and leaking water into the bin which then froze all the cubes together.
      I removed the ice maker assembly from the freezer compartment (four nuts/ nut driver) and unplugged the wire harness. I discovered the nature of the problem and I went on the Internet to look for replacement parts expecting I'd have to buy the entire ice maker. When I found PartSelect.com I looked through the pictures of the parts available for my ice maker. I found the correct part quickly and easily. And having an acurate photo on the site, I was able to match all the key features of the mold I had with the one on the screen. I ordered the part, and installed it the day it arrived with just a Phillips screwdriver and a nut driver. It functions perfectly.
      • George from Cottage Grove, MN
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver, Screw drivers
      26 of 28 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Heater on Ice Maker stopped working.
      Repair was easy and producing ice within five hours.
      Other Parts Used:
      Icemaker Motor Kit
      • Andy from Lorena, TX
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers, Socket set
      16 of 20 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Ice stuck in mold. mold coating was peeling off.
      Turn off water supply too ice maker and unplug the fridge power. using a nut driver remove one bottom screw from the bottom, near the front. The other two from the side atop the ice mold. (loosen screws and ice maker will lift up and off.)
      I set the ice maker on the counter, snapped of the front cover by hand. using a phillips driver, remove two screws near the bottom corners.(they go through the circuit board into the ice mold)
      circuit board in one hand, other end of ice mold in the other, slowly pull apart about 1 inch. remove the silver colored "on, off" bar at the end by snapping the retainer out of the ice mold. (the silver bar stays with the circuit board end)
      Watch how the ice guide(white fingers stationary on side of ice mold) hooks too the ice mold on each end. swap ice guide to new ice mold, insert three guide pins on end into holes on the circuit board, while holding ice guide onto ice mold, watch rotation bar while inserting into motor.(it only splines one way.) when each piece is lined up, simply push together and reinstall two screws. snap circuit board cover into place. reinstall ice maker into freezer in reverse order.
      • Martin from Shakopee, MN
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Screw drivers
      14 of 16 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Ice maker leaked into ice reservoir
      The ice mold has a coating on it. Over time the coating deteriorates. If your ice maker leaks water into the ice reservoir inspect the mold to see if the coating is compromised. If so, replace with new.

      Remove the ice maker assembly. 3 small hex screws. Unplug power cord. Disassemble ice maker assembly. Remove ice mold/heater. Replace with new. Reassemble.
      • joe from hilliard, OH
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver
      7 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Mold Ice Heating Element Broken
      Looking at the ice maker it is pretty cut & dried as to how to remove the unit. I took out the ice tray and just started removing all the mounting screws. The same for the mold ice tray & heating element. I was just sad that you did not have just the heating element separate from the mold ice tray.
      • timothy from indio, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Nutdriver, Screw drivers, Socket set
      7 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Black flecks in ice
      The lining of the ice mold (Whirlpool) started flecking off (black flecks in the ice cubes), so I decided to replace the mold.
      Loosen the two 1/4 inch upper nuts and remove the lower nut to remove the ice maker from the freezer. The hardest part was getting it unplugged. I used a small blade screwdriver to release the catch on the connector and pull it out.
      Remove the ice maker front cover. If you have a skinny enough phillips screw driver, there are two deep set screws through two holes on the lower portion of the control module (otherwise, remove the three screws on the controller, unlatch the shut-off arm from the control module, and separate the controller to access the mold screws). Unhook the shut-off wire from the end of the tray. Unscrew the two screws holding the mold and remove the mold.
      Remove the plastic hardware from the old mold and install on the new mold.
      Attach the new mold on to the control module.
      WARNING WARNING WARNING!!! The mold I bought already had the alumilastic on it for the contact point to the thermostat. When I installed it and tightened the screws, the alumilastic was dried out, didn't squash down, and dented the bi-metal thermostat on the controller, ruining it. I had to buy a new thermostat. Be sure to check that the alumilastic is pliable. If not, take it off and buy some fresh to put on there.
      Re-install the ice maker. It took a while to get the first batch of ice because the ice maker was at room temperature and I had the freezer door open for several minutes. So the freezer had to get cold and the ice maker had to chill down. Once everything got cold, it started making ice again.
      • Anthony from Billings, MT
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        More than 2 hours
      • Tools:
        Nutdriver, Screw drivers
      6 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      ice maker not operating
      Unlug refrig or turn off refrig from its control panel On/OFF switch.
      For ease of work remove freezer shelve directly below the ice maker. Remove four screws from the bottom of the ice maker assembly, three that secure the ice maker and the other that holds a plastice shroud in place over the ice maker's power plug.
      The ice maker is now ready to be removed; it will slide forward by pushing up on left and right side of the ice maker's mounting slide rails. Once the ice maker is moved forward it is easier to disconnect its power plug (depress a locking tab on the side of the connector and pull connector apart and remove ice maker assembly.
      Remove and replace motor module by removing three screws and and replace with new unit.
      Reverse ice maker removal proceure for installation. Once installation is completed turn on Power to Refrig, Ice making should begin after a few hours.
      Other Parts Used:
      Icemaker Motor Kit
      • Dennis from Sebastian, FL
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Nutdriver, Screw drivers
      6 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      coating (clear) on ice cube mold peeling off
      Removed ice maker from fridge. Removed motor assembly (3) screws on cover, and (2) screws inside. Removed mold (3 screws on bottom) and replaced everything in reverse order. Note: Turned ice maker off for several days while waiting for parts. The water line on this particular model will freeze inside the freezer if ice isn't made for several hours/days. You will have to defrost to begin making ice again.
      Other Parts Used:
      Icemaker Control Assembly
      • Matthew from Collegeville, PA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Screw drivers
      4 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      13 Reviews
      4.5
      Filter By Rating:
      • 5 Stars
        10
      • 4 Stars
        1
      • 3 Stars
        1
      • 2 Stars
        0
      • 1 Star
        1
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS11749915
      Manufacturer Part Number: WPW10190929
      Brand
      Model Number
      Description
      Kenmore
      1061118553
      Ice Maker
      Kenmore
      1061118555
      Ice Maker
      Kenmore
      1062155184
      Ice Maker
      Kenmore
      10641522500
      Refrigerator
      Kenmore
      10641523500
      Refrigerator
      Kenmore
      10641524500
      Refrigerator
      Kenmore
      10641529500
      Refrigerator
      Kenmore
      1064211173
      Ice Maker
      Kenmore
      1064317943
      Ice Maker
      Kenmore
      10644022600
      Refrigerator
      Kenmore
      10644022601
      Refrigerator
      Kenmore
      10644022602
      Refrigerator
      Kenmore
      10644022603
      Refrigerator
      Kenmore
      10644023600
      Refrigerator
      Kenmore
      10644023601
      Refrigerator
      Kenmore
      10644023602
      Refrigerator
      Kenmore
      10644023603
      Refrigerator
      Kenmore
      10644024600
      Refrigerator
      Kenmore
      10644029600
      Refrigerator
      Kenmore
      10644029601
      Refrigerator
      Kenmore
      10644029602
      Refrigerator
      Kenmore
      10644029603
      Refrigerator
      Kenmore
      10644032600
      Refrigerator
      Kenmore
      10644032601
      Refrigerator
      Kenmore
      10644032602
      Refrigerator
      Kenmore
      10644032603
      Refrigerator
      Kenmore
      10644033600
      Refrigerator
      Kenmore
      10644033601
      Refrigerator
      Kenmore
      10644033602
      Refrigerator
      Kenmore
      10644033603
      Refrigerator

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service