This transport wheel is for dishwashers and attaches to the base of the dishwasher and allows you to roll the dishwasher into the cabinet during installation.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, KitchenAid, Kenmore, Maytag.
Part# WPW10190778 replaces these:
AP6016621, W10190778
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
2.0
Filter By Rating:
5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
1
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Douglas B - May 16, 2018
Verified Purchase
Identical to Original. Too Bad!
This is absolutely identical to the part that came on the dishwasher. It is actually clear plastic, not white as shown in the photo. However, the part is cheap, thin plastic and breaks easily. Thank you Whirlpool. This doesn't reflect on PartSelect, which is supplying the OEM part, but it's a part that should have been more substantial in its design.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Relocating dishwasher into the new kitchen layout
In this case the dishwasher had already been installed for a few years. After removing it, we inspected it and saw it needed a bit of TLC. The transport wheels on the back were missing, making it harder to move around without scratching the tile and some of the original hardware was rusted or broken off. I looked up the parts easily he
... Read morere on PartsSelect using their parts breakdown diagrams and was glad to see what I needed was still available. We had a licensed plumber relocate the hot water line and drain for us to make things a bit easier. A licensed electrician had also moved the power line over to the new location and left a wire sticking out of the bottom of the wall to hardwire the dishwasher in again. We decided to convert the dishwasher to be able to be plugged into a standard 20amp wall outlet instead. We had already purchased a kit with a nice long cord and strain-relief snap on plastic fitting that snapped onto the metal incoming power box on the bottom front of the dishwasher. Using the supplied wire nuts, etc., we connected the wires and ground wire to the proper wires from the dishwasher and ground lug. We put the dishwasher aside and then went to work on converting the power wire coming out of the bottom of the wall, to a conventional outlet. I am mentioning all this because in our first attempt we unfortunately put the receptacle a bit high off the floor and the new power cord plug end, stuck out and hit the back of the dishwasher so it would not go all the way in and was sticking out from under the counter top. I tried using one of those flat adapter cables, but even that still stuck out to far. So we ended up relocating the outlet box as low as we could on the wall and this allowed the plug to stick out into the opening area at the bottom rear area of the dishwasher so it could now be slid all the way in under the kitchen counter properly. I hope that bit of trial and error will save you some time if you ever decide to go the pluggable route too. The new installation required the use of the dishwasher side mount brackets, so we had to purchase a replacement set of those, complete with the hardware to screw them down.
This project took a bit longer than planned due to the power plug problem, one which we will remember for any other similar appliance relocation projects, as well as the time to get our new parts in that we had to order, but other than that the rest went smoothly and the dishwasher was relocated successfully.
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dorothy
November 8, 2017
I am looking for a wheel for my kitchen aid dishwasher.My wheels are dark gray, and does the wheel come with the button that goes in the middle?
For model number KDTE104ESS0
Hi Dorothy, Thank you for the question. The Lower Dishrack Roller with the 2 wheels and the bracket that holds them on the rack is PartSelect Number PS11750057. Good luck with the repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
James
February 27, 2018
Hi, the wheels on top rack broke. So the front half is kinda hanging down. Not sure witch part(s) to buy?? having a hard time figuring it out. on your diagram of top rack, it's #9. look forward to hearing from you! thanks
For model number WDT790SLYM2
Hello James, thank you for your question. The top rack wheels are a part of the adjuster assembly. The wheels are not sold separately, they must be ordered in the kit of parts. The part you will want to order is part number W10712395 Rack Adjuster Kit - White Wheels. This is a kit that includes all parts required to make up 2 rack adjusters (right and left) and 2 adjuster actuators (right and left). Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Charlotte
March 20, 2019
My lower right hand wheel broke on the lower rack of my dishwasher and i would like to replace it with the same wheel, but the replacement shown in the parts catalog is white or clear and not well reviewed. Does it come with a kit or another set of some sort? The original was dark grey and heavy plastic.
For model number KDTM354DSS3
Hello Charlotte, thank you for your question. The wheel set for the lower rack of this appliance is Part Number: PS11750057. This would be the set of two wheels on one wheel housing as pictured. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Art
September 12, 2019
The wheels on the lower rack keep falling off. I have them but have lost several hub caps. Frankly the hub caps don't do the job of holding the wheels on very well. Are they available?
For model number KDFE104DBL2
Hi Art, thank you for your question. Unfortunately no. This part does not work with your model. I have listed the correct lower wheel assembly for your appliance below. Good luck with your repair.
Does this part come with the pin that holds the wheel to the assembly? Thank you.
For model number WDF760SADW2
Hello Heinz and thank you for writing.
No, this is just the wheel. the pin is part # PS11753385. We hope this helps. Please contact us anytime if you require further assistance.
