Quick Question!

Have you ever purchased from PartSelect.com before?

11749893-1-S-Whirlpool-WPW10189966-Electronic Machine and Motor Control Board
11749893-1-S-Whirlpool-WPW10189966-Electronic Machine and Motor Control Board 11749893-2-S-Whirlpool-WPW10189966-Electronic Machine and Motor Control Board https://partselectcom.azureedge.net/Schematics/Maytag/CVXDE1WF.gif

Electronic Machine and Motor Control Board

Your Price

$363.17
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11749893
Manufacturer Part Number WPW10189966
Manufactured by Whirlpool

This part is also used as a water pressure transducer.

This part works with the following brands: Kenmore, Whirlpool, Maytag.

This part works with the following products: Washer.

This part fixes the following symptoms:

  • Will Not Start.
  • Timer will not advance.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Recent

Question:

Washer is set for spin cycle but the "cancel/lid lock" light comes on and there is a loud buzz. Nothing happens at that point other than the buzzing. I've tried unplugging it and then plugging it back in. Also, when the "cancel/lid lock" light comes on, the lid is locked. We have not noticed any codes showing up.

John for model number WTW6600SW2
Answer:

Hi John, Thank you for the question. The first thing I suggest trying is to press and hold the “end of cycle signal” button for 20 seconds and this should reset the washer and clear the flashing light. If the lid unlocks, be sure lid lock and lid striker are clean from lint or detergent buildup, It can block the switch and cause the flashing light.Also check the lid lock and lid striker are aligned and not loose, they can become loose from years of vibration or slamming the washer lid shut. Check the wire harness connections from the lid switch to the main control assembly as it may have become loose or the wire harness may be damaged.If all checks out,the lid switch may need to be replaced. Hope this helps!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 4 reviews What's this?
1-4 of 4
 

145 of 165 people found this instruction helpful

Parts Used:
  • Electronic Machine and Motor Control Board
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: James from Turnersville, NJ

Washer always stopped at the 47th and 24th minute of each load and display f1 error code. I would have to press "cancel" and then "start" a few times for it to continue.

Removed the dial control top covering by unscrewing the 3 screws in the back of the cover. Once the cover was off, the control module was exposed and all I had to do was:

1. Disconnect the wires that were plugged into the control module

2. Remove the old module. There was 1 screw holding it in place.

3. Replace with the new module. Put back the screw back.

4. Reconnect the wires. There was about a 8 different plugs that needed to reconnected. So I took a few pictures of how the wires were connected/plugged in, with my compact camera (just in case I forgot where each went). I didn't need to use the pictures, but it was just a safety net in case I forgot where each went.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

50 of 57 people found this instruction helpful

Parts Used:
  • Electronic Machine and Motor Control Board
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Arthur from Linden, NJ

Within 10 minutes of starting the washer, it would stop. Grreen flashing lights and f1 error code appeared.

Someone on Google suggested holding the stop button and the start button at the same time for 60 seconds as a way of by passing the problem. This did work but soon became a pain each time we used the washer.Installing the new part was super easy. Three screws hold the cover on, one screw holds the part in place and all the plug- ins are marked by color as to where they go. Pretty hard to mess it up.I did take a few digital pictures before just in case.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

30 of 40 people found this instruction helpful

Parts Used:
  • Electronic Machine and Motor Control Board
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Richard from Cartersville, GA

Control panel

Google seach and search on Parts Select. Easy repair

Help other customers find the most helpful instructions.

Were these instructions helpful?   

26 of 34 people found this instruction helpful

Parts Used:
  • Electronic Machine and Motor Control Board
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Jenny from Stone Mountain, GA

Replaced main control due to f1 error code.

Followed the directions given in other client reviews. It was easy and works perfectly now.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11749893
Manufacturer Part Number: WPW10189966
Brand Model Number Description
Kenmore11027032600Washer
Kenmore11027032601Washer
Kenmore11027032602Washer
Kenmore11027032603Washer
Kenmore11027042600Washer
Kenmore11027042601Washer
Kenmore11027042602Washer
Kenmore11027042603Washer
Kenmore11027052600Washer
Kenmore11027052601Washer
Kenmore11027052602Washer
Kenmore11027062600Washer
Kenmore11027062601Washer
Kenmore11027062602Washer
Kenmore11027062603Washer
Kenmore11027062604Washer
Kenmore11027072600Washer
Kenmore11027072601Washer
Kenmore11027072602Washer
Kenmore11027072603Washer
Kenmore11027072604Washer
Kenmore11027082600Washer
Kenmore11027082601Washer
Kenmore11027082602Washer
Kenmore11027082603Washer
Kenmore11027082604Washer
Kenmore11027082605Washer
Kenmore11027086601Washer
Kenmore11027086602Washer
Kenmore11027086603Washer