Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Paul V - February 15, 2023
Verified Purchase
A straight forward fix
I read a couple people's instructions on how to replace the handle and the jog was easy.
★★★★★
★★★★★
John R - May 12, 2021
Verified Purchase
Microwave Door Handle Replacement
We initially repaired rather than replace our microwave door handle when it first broke because vendors wanted $75 for an 8”piece of plastic! The epoxy repair was virtually invisible and outlasted the other original end of the handle, but the break this time on the other end was not going to work with the epoxy repair. Partselect had the part and shipped it out within a couple of days.
The repair was easy and took 5 minutes. Some instructions indicated that I needed to remove the door, but that was unnecessary. I simply used a putty knife to pry loose one end of the inside trim piece to expose the screws for the door handle. I then removed the screws and saved them for the new handle. The new handle fit perfectly and once the original screws were installed, I snapped back in the inside trim and was done.
I’ll give PartSelect a 5 for service, but I wasn’t happy about the price for a plastic handle.
★★★★★
★★★★★
Suzan W - January 22, 2020
Verified Purchase
Perfect
My handle broke months ago and I was able to glue it back on. Then a few weeks ago it broke again so knew I had to replace it. Thank you partselect for having exactly what I needed, shipped quickly and provided instructions on how to install it!
★★★★★
★★★★★
Andrew D - November 2, 2018
Verified Purchase
Broken microwave handle.
The part was exactly what I needed and the advice for replacing it was spot on! Thank you
★★★★★
★★★★★
Mary C - October 4, 2018
Verified Purchase
Installing was easy.
Received part in good condition. Part was on back order so it took some time before delivery. Appliance back in working condition.
★★★★★
★★★★★
Jeff M - April 20, 2018
Verified Purchase
Replacement handle
Received as described, an exact factory replacement that fit perfectly.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Just very easy to do it
Open the door of the microwave and remove the plastic at the door and take the screws off ,and take off the old handle in put your new one screwed back that's it,do you see how Easy it is,like you say hello
juvens from N MIAMI BEACH, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken handle
Remove the door by lifting up the hinge side so that the two hinge pins disengage from the steel hinge brackets.This can be a bit fiddly so just keep wiggling the door until one of them pops off. Remove the plastic cover trim piece that surrrounds the window, exposing the phillips head screws that secure the door to the handle.
... Read moreRemove the screws to un-install the old handle, they are deep set so if they fall out of the door you will need needle nose pliers to pout them back into the door. Set teh new handle in place and tighten the screws down snuggly. Retrace your steps... snap the plastic trim back in place and reset teh door on it's hinges (once again this can be a bit fiddly so take your time.
Eat a Burrito!
Read less
Raymond from Bishop, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
44 of 53 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Craig
November 11, 2021
Does this microwave door handle come with parts 6,7, & 8 as shown in the schematic or only part 6?
For model number MMV5207BAS
Hello Craig, Thank you for the question. This part included #6, #7 and #8 from the diagram. We hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Andrew Hendrickson
December 28, 2019
I need to order a new microwave door handle for a Maytag model #mmv5165bas microwave.I found two references for what looks like the part i need. one is part number mmv5165bas15 the other says mmv5165bas14. my microwave does not show a 14 or 15 after the model number. which one do i need to order?
please advise.
thanks
For model number MMV5165BAS
Hi Andrew, the correct part is PS11749865. Thank you for your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Fran
March 4, 2019
Do you have any other colors on this handle???
Hello Fran, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Donald
October 16, 2022
I need to replace the handle on my Amana Micro wave Serial #16252981NN
For model number MMV5207BAS
Hello Donald, thank you for contacting us. The door handle (stainless), part number PS11749865, will fit your model. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
