This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Kenmore, Whirlpool.
Part# WPW10185976 replaces these:
AP6016539, W10185976, WPW10185976VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.8
Filter By Rating:
5 Stars
3
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jose G - April 9, 2020
Verified Purchase
Easy repair- Right part
The dryer timer was easy to install and solved my problem of no drying heat being produced
★★★★★
★★★★★
Janice T - December 3, 2018
Verified Purchase
Easy repair for my husband
Dryer back to work. Recommend your service.
★★★★★
★★★★★
Owen R - June 8, 2018
Verified Purchase
Timer installation
Works perfect.
★★★★★
★★★★★
Carol J O - March 9, 2018
Verified Purchase
Dryer timer
Received swiftly, great part that works wonderfully
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer not heating.
Checked all possible items with a multimeter. Of course the last item I checked was the one that did not show a closed circuit.. the timer. Ordered the part with one day shipping and it arrived the next day. Install took just a few minutes and it was fixed. Online videos are a great tool for diagnosing and repair. Do yourself a favor and
... Read moredo it yourself and save a lot of money.
Read less
James from CANTON, GA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Melissa
January 23, 2020
Our Kenmore dryer has been running past the cycle. It will finish drying but then it continues down to the 'air fluff' cycle and then stays running when the dial is on the off position. We just replaced the heating element and thermal fuse as we were having issues with it not drying everything.
For model number 11069422801
Hello, Thank you for your question. You will need to look into the timer itself that operates the cycle. It seems there is an issue with that, that is part# PS11749829. Please submit a new question if you have any follow ups. We are looking forward to hearing from you.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
February 8, 2022
Kenmore electric dryer: Initial problem of no heat @ normal setting, very low heat @ high setting. Removed back panel & exposed heating element-normal setting resulted in element "on"--switched to high & element went "off". Kept experimenting with switch & got no heat in any position. Both fans working & timer was moving with no heat. Timer or element problem?
For model number Switch w10185976 E
Hello Richard, Thank you for your inquiry. You can test both parts with a multimeter to see if either is causing the issue. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Anh
December 17, 2019
Hello, i've been having problems with my dryer. At first, we noticed that as soon as we started the timer, the heating element would go on even though the door would be opened. Then the dryer couldn't start so we replaced the thermal fuse and the cycling thermostat, and it worked again. But a couple of days later, it stopped working again. So we cleaned the vents, replaced the fuse and it now seems ok... but for how long? but when i put my ear close to the timer, i can hear it spinning on and on, it never stops. so when it turns by itself and goes into auto-dry or timed-dry, the heating element would go on by itself even if the door's opened and it doesn't tumble. so do you guys think the problem's related to the timer? or could it be something about the door? thanks
For model number Kenmore 110.C60102310
Hello Anh and thanks for writing.
It certainly sounds more like a faulty or loose belt PS346995 check for signs of damage and replace it if needed. We hope this helps. Please contact us anytime.
If I order this and it doesn’t fix my problem can it be returned
Hello Amanda, thank you for your question. Our return policy states: Parts must be in resalable condition “Resalable” means that the part must not have incurred damage, such as signs of installation by the customer, marks, or scuffing.
Part must also be in its original packaging to be considered resalable. Please inspect part before removing from its packaging, as this can cause return to be rejected.
Electrical parts are subject to additional scrutiny.
Rejected returns cannot be shipped back to customers. We hope this helps. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Raymond
July 20, 2021
Dryer won't start. Heating element working. Drum drive belt good. Had a problem of the timer dial not moving not counting down on the time. I rotated it back and forth multiple times and it worked. This time the dryer stopped about half way through the drying cycle.
For model number 11061402311
Hello Raymond, Thank you for the question. This is an indication the Timer Switch PartSelect Number PS11749829 will need to be replaced. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
