We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
10 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Felipe Campos
February 21, 2018
Will w10408179 water inlet valve work for my refridgerator?
For model number WRS325FDAM01
Hello Felipe, thank you for your question. Yes, the correct valve for your appliance is Water Inlet Valve WPW10179146. Good luck with your repair!
10 people found this helpful.
Was this helpful?
Thank you for voting!
G.
January 17, 2022
Will this part (water flow valve) resolve a water flow issue, present only when filter is installed? Meaning, water flows fine, when no filter is installed. Thanks.
For model number 106.51129210
Hi G,
Thank you for your question. If it has been more than 6 months since the water filter was changed, it may be clogged and it will need to be replaced. If you have recently replaced the water filter and you did not flush it, this may be a reason, why you are unable to dispense water from the refrigerator. If the water filter is on good working order, then you should check the water filter housing, the water inlet valve and the water tubing to see which part is causing the issue. We hope this helps! If you have any questions, please let us know.
What is the correct part number for the water inlet valve for the wrs325fdaw04
For model number WRS325FDAW04
Hello and thank you for writing.
The water inlet valve PS11749668 is in the list of compatible parts for your model. We hope this helps. Please contact us anytime if you require further assistance.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Dan
April 11, 2022
Refrigerator is dispensing water but not making ice. Will replacement of this valve solve
For model number 10651335710
Hello Dan, Thank you for your inquiry. You can test the water inlet valve with a multimeter to see if it is causing the issue. We have included a link to our video on testing a water inlet valve and how to run a test on the ice maker. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Catherine
July 17, 2022
HOW DO YOU TELL IF THE WATER INLET VALVE IS BROKEN?
For model number WRS555SIHZOO
Hello Catherine, Thank you for your inquiry. Check the valve for any visible damage, and then you can also test it with a multimeter. Set your multimeter to the R X 1 ohms setting to test for continuity. Place each of the multimeter's leads on a terminal. Your multimeter should display a reading between 200 and 500 ohms. Closely examine your water inlet valve. The exact ohm resistance rating you should test for may be marked on the valve. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nolan
July 23, 2021
My ice maker tray is frozen as a single sheet of ice instead of cubes. I have defrosted the ice maker which solved the issue a few times. However, it makes one or two batches of ice and then freezes in a single sheet again. This time, it has stopped dispensing water all together. Water does come out of the fridge and pressure is good. I do have a water filter that was just replaced and the freezer temperature is not too cold. I also have an additional water filter that filters water going into the fridge from the main water line. I am trying to figure out whether i need a new inlet valve or ice maker all together. Thank you
Hi Nolan,
Thank you for your question. When you replaced the water filter, did you flush the filter? It is important to flush the filter before using it. If the dispenser is not dispensing water and the ice maker is freezing over, depending on the type of refrigerator you have, you will need to check the water inlet valve, the ice maker, the dispenser control board, the main electronic control board, the defrost timer, the defrost thermostat, the defrost heater and the evaporator and condenser fan motors. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Felipe
February 21, 2018
I need water inlet valve, the correct part number is WPW10179146, will a W10408179 work for my model? Or does it have to be WPW10179146?
For model number WRS325FDAM01
Hi Felipe,
Thank you for your question. We can only guarantee that this part: WPW10179146, will work with your appliance. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Paul
January 3, 2023
Does water inlet valve number WPW10179146 fit refrigerator model number WRS555S1HZ (Whirlpool) and is there a tutorial on changing the valve?
For model number WRS555S1HZ
Hello Paul, thank you for writing. Yes the valve PS11749668 you had chosen is compatible with your model. We have a video for a similar model that should be of some help for you. We hope this helps.
Was this helpful?
Thank you for voting!
Ron
January 5, 2022
water inlet valve model WRS315SDHM00
For model number WRS315SDHM00
Hi Ron,
Thank you for your question. The part number listed under your model number for the water inlet valve is PS11749668. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Was this helpful?
Thank you for voting!
Burch
December 11, 2022
What inlet water value # to fit this model of refrigerator have water to frig ear water pump go on in ice maker but no water coming in to it?
For model number WRS322FDAM04
Hello Burch, thank you for contacting us. The water inlet valve, part number PS11749668, will work on your model and is the likely solution to the problem. We would also recommend checking the water line, part number PS993036. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Average Repair Rating: 3.3 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice maker removal
Once the screws were removed from the bottom of the ice maker, the unit had to be removed forcefully because of the limited clearance and the support tray under it. The next difficulty was to disconnect the old wiring harness so that the new unit could be installed. Having completed this, the install was fairly easy and the job was completed successfully. By changing the supply valve, filter and ice maker all the problems were removed and the unit is working properly.
First off you need to shut off the water supply valve that goes to the icemaker. Next pull the refrigerator from the wall , thats the fun part. I did not unplug my refrigerator when I did this . You can to be extra safe. At the bottom on the back side remove the cardboard cover on the bottom like four or five screws and set this aside. The water valve is on the bottom on the right side. There are 3 water lines attached to it. Having a towel handy might be helpfull. 1 line supplys the water, 1 is for the water dispenser and 1 is for the ice maker. These are push in connections no wrench needed. Remove the 2 screws that attach water valve to frame. Arrange it to make removing the 2 wire connections and water lines easier to remove. Wire connections just pull off. Mark them as to what valve they go to. Next remove the water lines. you need to remove a plastic lock that insures that the water lines do not pop off, very simple. Next push down on the nylon connector push down on the top of connector and pull on the plastic water line at the same time and it will come out. Do this to all 3 water lines. Remove old water valve and install new one in the reverse order. The water lines just push in no need to mess with connector when line is in reinsert the plastic lock. Reconnect the power connections. Align the water valve bracket with screw holes in frame and reattach the 2 screws holding it in place. Now would be a good time to turn on the water and check for leaks. You can check water dipenser but ice maker has a mind of its own. If all is good reinstall the cardboard cover on the back bottom and push refrigerator back where it was. Make sure the water line is not kinked. Aftre a couple of hours the ice maker should start making ice.
Robert from STRONGSVILLE, OH
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water and ice dispenser's were not working
Checked the water line from the wall to the supply port of the inlet valve and it was suppling water but no water beyond the water inlet valve, So I ordered a new inlet valve and installed, and it fixed the problem. Inlet valve supplies water to the ice maker and water dispenser filter housing. Partselect videos and you tube installation videos very helpful. Partselect troubleshooting guide also very helpful. Great company
Enrique from CASA GRANDE, AZ
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
There was no water in the icemaker tray to freeze into ice cubes
Took off the rear cardboard cover, unscrewed the old valve, checked to see if there was enough tubing to fit if I cut the tubing. removed the 2 electric connectors, Cut the tubing 3, installed the 2 electric plugs, inserted the 3 tubes, mounted the new valve, replaced the cardboard cover. I checked for leaks, and very soon heard the valve filling the icemaker tray, and soon, Ice cubes again.
Thomas from GRANT, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inlet valve was broken at the water line connection
Changed inlet valve
James from VANCEBURG, KY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
9 Reviews
4.6
Filter By Rating:
5 Stars
6
4 Stars
2
3 Stars
1
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Enrique V - May 5, 2022
Verified Purchase
water inlet valve and water filter housing
original factory parts, delivered on time, gret customer service.
★★★★★
★★★★★
Gary S - March 11, 2022
Verified Purchase
Easy repair, part was an exact fit
I received the exact part I needed, as described. It installed with no problem and fixed my problem.
★★★★★
★★★★★
Phyllis V - May 7, 2021
Verified Purchase
You can do this!
Part was perfect form and function. It did arrive with one of the quick connect push fittings broken in the box, but I was able to rob one from the valve that was to be replaced. Item looks intimidating, since there are 3 water connections and two electrical connections. But with a little attention, anyone with average handyman skills can do this replacement. Making sure the water connections are sound (give them a tug) before closing up the back panel of the fridge can save you some grief.
★★★★★
★★★★★
Ivan R - April 6, 2021
Verified Purchase
Easy repair
Part arrived quickly and it was an easy repair, just watch YouTube video. Now I have water from the fridge again.
★★★★★
★★★★★
Tom R - May 2, 2020
Verified Purchase
Easy repair!
The part looked new, and a friend installed it, and our icemaker in frig is up and running again!
★★★★★
★★★★★
Larry K - April 24, 2020
Verified Purchase
Perfect part. Solved my problem
My fridge is making ice again. Thanks
★★★★★
★★★★★
Dan S - February 14, 2019
Verified Purchase
Part was exactly what I ordered
Although part was exactly what I ordered and received it quickly, it didn’t fix my issue but that is 100% on me. I started with the cheapest fix first. The 2nd part is already on its way. Partselect is an awesome site and has never failed me.
★★★★★
★★★★★
Russell C - September 17, 2018
Verified Purchase
Part delivery
Part came without delay and was in good condition
★★★★★
★★★★★
Brian B - July 21, 2018
Verified Purchase
The part took less than five minutes to install.
The metal mounting bracket was slightly bent but easy to bend back. There was no damage to the box so it seems it was put in box in this condition. The valve was very easy to install because I took pictures when removing. It had no instructions with the part. I would purchase more parts from this place if needed. My main complaint is it took over a week to get the part, there was some kind of error with shipping label so the parts went no where for days.
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11749668
Manufacturer Part Number: WPW10179146
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff