The oven door gasket on your range functions as a seal between the warm interior of your oven, and the outside. It prevents heat from fleeing your oven when the door is closed. Before making any repairs to your oven you should make sure to wear work gloves to protect your hands, and give your oven time to cool. The only tool you will need to make this repair is a pair of needle nose pliers. This oven door gasket comes with built in retaining clips; if any retaining clips from your old gasket are left in the oven make sure to remove them before installing your new gasket.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Range Door Gasket
Troubleshooting
This part fixes the following symptoms:
Door won’t close | Oven not heating evenly | Little to no heat when baking | Touchpad does not respond
This part works with the following products:
Range, Wall Oven, Microwave Oven Combo.
Part# WPW10162384 replaces these:
AP6016005, 7201P046-60, W10162384
Customer Reviews
Average Rating:
★★★★★
★★★★★
15 Reviews
4.9
Filter By Rating:
5 Stars
13
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gloria J - February 10, 2022
Verified Purchase
Great part
The part was exactly what the stove needed. It arrived as expected and was easy to repair.
★★★★★
★★★★★
Yvonne G - January 5, 2021
Verified Purchase
easy to repair
very easy repair.
★★★★★
★★★★★
Stephen F - December 26, 2020
Verified Purchase
repair was as easy as the video explained.
Part was as discribed and fitted perfectly.
★★★★★
★★★★★
Jennifer H - January 19, 2020
Verified Purchase
Easy repair and great part
I was able to install this part in 5 minutes or less!
★★★★★
★★★★★
PAUL A. B - December 10, 2019
Verified Purchase
Perfect
This gasket was easy and fast to install. It was a perfect fit.
★★★★★
★★★★★
Lenora C - December 13, 2018
Verified Purchase
TwiO Minute Repair
I had my husband watch your video and when we received the part, he went into the kitchen and was out in about two minutes. One minute to take off the old part, and another minute to install the new one. I was shocked he changed it so quickly.
★★★★★
★★★★★
Neil M - November 26, 2018
Verified Purchase
door gasket
came fast / installed easy / correct part
★★★★★
★★★★★
Girard L - November 4, 2018
Verified Purchase
Easy to install and works great.
The oven door gasket was easy to install - it took about 10 minutes, and it works perfectly.
★★★★★
★★★★★
Deborah M - October 7, 2018
Verified Purchase
Stove gasket
The part was just what I needed and went in perfectly
★★★★★
★★★★★
Marvin W - September 1, 2018
Verified Purchase
Quick Delivery, Easy Installation, tremendously cooler around the door during baking.
It would have been nice to be a little cheaper, but it came in quickly, was easy to install, and appears to be working just fine. Just how long it will last is anybody's guess. Very pleased with the ease of installation and initial results.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 16 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Worn Burner Head Screws
Wanted to deep clean the range, but popped the worn screw heads on both the burner mounts and igniters embedded in the chassis. The way the range is designed, the bolts extend through the glass top and into the burner orifice. The bolts were unable to be extracted so replacement was the only option outside of a small third party machine s
... Read morehop. The double burner is discontinued and impossible to find, will replace this "High-End" POS when we remodel.
Removed Burner Heads Disconnected igniter Leads Extended range to remove glass top Removed glass top mounting screws CAREFULLY Removed Glass Top (REPLACEMENT = $800 Min) Removed affected burner orifices Tracked down parts list and maintenance manuals Tracked down similar issue: https://www.youtube.com/watch?v=YfCLJ1rXK6w&t=114s Replacement bolts : #8 24 X 0.5" Sheet Metal Screws Ordered Replacement parts and installed in reverse
The electric clock that controls many settings for the stove quit working.
Because there were " 11 " pins/clips on the clock/control unit, I just disconnected one clip, at a time, from the old clock and connected the wire to the new clock unit. Before I knew it, I was finished and the CLOCK and settings were back to working! GOOD NEWS, I did did have to buy a new $1,700.00 to fix the bad clock problem, like I
... Read morewas told that I would have to do by the repairman. I found the part on YOUR website, when the repairman could not find one for me on his 'go to' websites and suppliers. THANK YOU FOR HAVING THE PART.
The entire "project" took me less than 3 minutes, and required no tools at all! First, the saleswoman over the phone pointed me to the correct product for my problem ($30 less than what I thought I needed), and it arrived at my home within 4 days. Then, it was just a matter of pulling off the old gasket, and snapping the new one in plac
... Read moree! Simple!
Read less
Stephen from Chapell Hill, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Filter was coming apart, door gasket was dirty and fraying
Opened the range grid, popped in the new filter, seconds after that I pulled out the old door gasket, put in the new with its little poppers and that's it. Both jobs took me less that 3,minutes. Great.Easy install for both products.
Door gasket was hard and brittle from baked-on grease - heat leaking around door
Waited for my husband to do it, but when he didn't, I tried it. Very simple! Just pulled the old gasket out of the pinch pin holes in the door, then replaced it. Tuck the one end into the hole at the bottom of the door, then match up the little pinch pins on the gasket with the holes in the door - matches up perfectly! Be sure to tuck in
... Read moreeach of pinch pins till they sort of "snap" into each hole. Took me 5 minutes, tops. Works great now, no more lost heat around the edge of the door.
Read less
Harlen from Spring Creek, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven would not come up to temp. that was set
Replacing the sensor kit and door gasket was no problem at all, however the baking element was A different story. The problem was not the fault of the replacement part, but the removal of the element to be replaced. The phillips head screws stripped out very easy and getting them out without damage to the interior finish of the
... Read more oven was time consuming and challenging, but patients, and perservrance win and so did I. Oven now works great
Removed door from oven by pulling up at the first stop point after opening the door. Removed the outer shell by removing 5 screws. Disassembled the inner door by removing 6 screws. Be careful with the insulation blanket (fits in a molded portion of the inner door). Glass windows can be removed (for cleaning) via a couple screws. Old
... Read moregasket/seal is held in-place via spring-clips; just squeezed each clip, pushed each thru their respective holes, and pulled off the worn-out gasket. New gasket snapped in-place by pushing the clips thru the respective holes. Reverse the process to reassemble the door. You can do this job in 15-20 minutes. Took us longer because it took some elbow-grease (and patience) to clean the crud off the glass windows.
Read less
Daniel from Katy, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven door hinges broken
With the back removed, replacing the lamp receptacle is straight-forward. Likewise, the door gasket is very easy. However, in order to replace the hinges, you have to remove the burner glass top (screws underneath the front lip), and inner and outer side panels. Also the supplied hinges mounting holes were not threaded so I had to use my
... Read moreown bolts, lock-washers and nuts in order to attach them. Total time, including a bit of cleaning, was 5 hours.
My wife destroyed the oven door seal with oven cleaner...
I ordered the part one afternoon. It arrived before noon the next day. Then I simply removed the old seal (with about 2 dozen spring clips). Inserted the new part by carefully inserting the new seal into its corresponding hole at each end and then worked my way around the seal while inserting each attached spring clip into its correspon
... Read moreding hole.
Read less
David from Bexley, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
14 of 16 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
19 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Fred
January 17, 2018
Will my Jenn-Air range model #jes9800aab and serial #16024832an be compatible with the door gasket part #ps11749287.
For model number JES9800AAB
Hi Fred, Thank you for the question.Yes, the PS11749287 is the correct switch for the model number provided. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
May 6, 2018
Is part # wpw10162384 the correct replacement door gasket for my oven door? Thanks for this assistance.
For model number Maytag MGS5870ADC
Hello Joe, Thank you for your inquiry. We show that this is the correct door gasket for your model. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Fred
January 17, 2018
Does this door gasket work on my model?
For model number JES9800AAB
Hi Fred,
Thank you for your question. Yes, this part works with your model. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Stacey
October 14, 2017
I am replacing the old gasket with a new one. The old gasket is fitted between two other door parts making it difficult to pull part loose without removing several screws in the door. Are there instructions on how to replace an old original oven door gasket that came without tension clips? How difficult is this diy project?
For model number Roper model 2390L00
Hi Stacey,
Thank you for your question. This is generally a very easy DIY project. We do have an installation video underneath this part that may help you. Here is the link: https://youtu.be/dog7d1nWgaQ . Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Charles
December 27, 2019
Does this oven gasket work on this Kenmore electric range
For model number 970C653730
Good Day Charles. Thank you for your question in regards to your unit (Model Number 970C653730). Based on our research the PartSelect Number for the part that is compatible with your unit is PS977704. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Cindy Ponce
January 12, 2018
Does this gasket has 25 hooks for 25 holes for the oven door?
For model number MGR5752BDB
Hello Cindy, Thank you for your inquiry. Yes, we are showing that this gasket has 25 hooks. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Somchai
October 4, 2022
Does this gasket fit for my Jenair Range Oven Door?
For model number JES8850ACS
Hello Somchai, thank you for contacting us. Yes, the door gasket, part number PS11749287, is compatible with your appliance, model number JES8850ACS. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lily
March 1, 2023
I need a replacement oven door gasket for this old model W10432689A. Which seal part number should I use? Thanks!
For model number W10432689A
Hi Lily, thank you for contacting us. The part you are looking for is the oven door seal, part number PS11743839. We hope this helps!
I am looking for a oven gasket for this model Serial 3 Z0370576ER
For model number JES8850ACB
Hi Margaret, Thank you for asking. The Oven Door Gasket for this model is PartSelect Number PS11749287. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Frank
February 12, 2019
See my response to your question below.I did as you suggested; checked the following part ps1570174 with a multimeter and it was good. i also replaced part number ps11745985, electronic oven control and the oven still does not turn on. the left hand side of the touchpad; buttons labeled; bake, broil, favorites on/off do not beep. the setup on/off beeps but you can set the time. the remaining all seem to all work i.e. fan, timer 1&2 work all the number buttons work. can you offer me some thoughts as to what parts i need to order?
answer:
hi frank, thank you for your question. before we can assist you further, is your stove displaying any error messages? was there a power failure prior to the oven not working properly? thank you and have a great day!
response: no there are no error messages displayed and yes from time to time we do have power outages. i do have a whole house surge protection system.
For model number JES9860CAS02
Hello Frank, Thank you for your follow up. At this point in time if you have not replaced the touch pad itself then you I suggests doing that. The sensors on the touch pad could be worn out so it cannot communicate with the board.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/Range-Seals-and-Gaskets.htm"},{"position":3,"name":"WPW10162384","title":"WPW10162384","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
