Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
Washer Water Inlet Valve with Thermistor Specifications
This part is used to help control and balance the water temperature flowing in to the washer tub.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Replacing your Kenmore Washer Washer Water Inlet Valve with Thermistor
Troubleshooting
This part fixes the following symptoms:
Leaking
No hot or cold water
Water Filling Issues
This part works with the following products:
Washer
Part# WPW10144820 replaces these:
AP6015761, W10144820, W10311458, WPW10144820VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
45 Reviews
4.9
Filter By Rating:
5 Stars
43
4 Stars
1
3 Stars
1
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mel F - January 15, 2023
Verified Purchase
No problems with replacing part.
The part was obviously an FSP and a perfect replacement for the original. Definitely not a Chinese knockoff.
★★★★★
★★★★★
Deveda L - February 20, 2018
Verified Purchase
Very easy repair
Got the parts sooner than expected now my washer is back up and running just fine
★★★★★
★★★★★
Michael I - March 1, 2018
Verified Purchase
Fixed it myself
Washer would stop before final rinse like it was done. Actually, the cold water valve stopped working, so no rinse. (We deduced this was the problem because this rinse in the cold water rinse and everything else was working.) Popped old part out, plugged this one in (with little work loosing the back to get to it) and it worked first try. DIY saved me bucks. Would do again.
★★★★★
★★★★★
Glenn M - March 6, 2018
Verified Purchase
Received and replaced valve
Now we have hot and warm wash water again.
★★★★★
★★★★★
Monica S - March 24, 2018
Verified Purchase
worked great
I'm glad to have my washing machine working again. The part works great! Shipping was a day later then stated, but I think that was the shipping carrier's problem.
★★★★★
★★★★★
Kyle L - June 20, 2018
Verified Purchase
Simple repair
The part worked like a charm! Easy fix.
★★★★★
★★★★★
Susy C - March 30, 2020
Verified Purchase
Very easy repair
This was a very easy repair using the video provided on the website. The part came in a very timely fashion and was just what we needed.
★★★★★
★★★★★
Kaye D - June 30, 2018
Verified Purchase
Fit perfectly and solved problem
Fairly easy repair with help from a video. Washer works fine now.
★★★★★
★★★★★
John K - April 11, 2018
Verified Purchase
Thanks for the video! Easy fix.
30 minute repair. Part was right. The video was great. Probably saved me at $100!
★★★★★
★★★★★
David R. G - April 18, 2018
Verified Purchase
Just what I needed.
The part was the exact one I needed and fit perfectly. Shipping was fast, it actually showed up a day earlier than expected, I’ll be using partselect again.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 20 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water inlet value was not working correctly
Followed your online video and it worked very well.
Cindy from HENRICO, VA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water inlet valve was leaking, Washer Water Inlet Valve with Thermistor
Replaced the Washer Water Inlet Valve with Thermistor
James from PORT ORCHARD, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bad inlet valve
Watched a video
Donald from YAKIMA, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking in tub
Removed top control panel. Removed outer skin, removed washer water inlet valve. Reversed steps to install.
Edward from ODESSA, TX
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was running out on the floor when hot water was filling the washer.
I watched the repair video and found it to be very informative. The repair took me about 45 minutes but only because I cleaned the entire washer, inside and out while it was apart.
Les from Shreve, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tub would not stop filling with water.
Remove the front cover. Remove the old. water inletvalve and replace with the new valve. took me about thirty minutes.
JUAN from HARLINGEN, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Very little hot water was the problem
I followed the video you guys sent me. You guys and woman are the best!
No cold water at all was going into machine. Husband checked hoses and everything was fine with those so he determined what the problem was. I searched the internet and to my surprise found the piece we needed! First one we received had a disconnected wire therefore we couldn’t use it. I called and
Husband dismantled the top, snapped the bad piece out and reconnected the good one. Reassembled everything afterwards.
MelanieKraemer from THIBODAUX, LA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking
Install new valve
Walter from CHIPLEY, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hot water was always leaking
Remove the 2 hex head at top left and right from back of control panel, and 2 Philips head screws resesed at bottom. Gently slid forward and lift and set in front. Pop all wire holders from back panel and unplug the old part, then pop the 2 spring clips, tape or hold onto when released. Pop the old part from back panel. And reverse operat
... Read moreion with the new part.
Read less
Todd from MESA, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
32 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
December 2, 2017
After final rinse cycle, there are drips of water entering the tub from somewhere in top portion of the back of the tub. If left for a long period of time, the tub will fill with water. Not good, if you’re gone for a length of time. Would probably have to turn off the hot and cold water at the shut off valves to be safe. I am assuming that the water inlet valve is bad. Would you agree with that assumption?
For model number XXRTW4440VQ
Hi Bill, Thank you for the question. Yes I would agree that you need to replace the valve. This is a common symptom with defective water inlet valves. Hope this helps!
32 people found this helpful.
Was this helpful?
Thank you for voting!
Mark
December 26, 2017
Hi when i turn the washer on and set it to cold it will not fill but set it to hot and it works started after i took the screens out to clean them.
For model number RTW4440VQ2
Hi Mark,
Thank you for your question. It sounds like you will have to replace your water inlet valve. The screens inside of the valve are actually not supposed to be removed. Because then you run the risk of debris getting inside the solenoid and jamming it up. I hope that helps. Good luck with your repair.
29 people found this helpful.
Was this helpful?
Thank you for voting!
Amanda
August 14, 2017
This problem didn't start until i cleaned the screens on the hose and removed the inlet strainers on the washer, now my washer won't stop filling with cold water
For model number WTW5200VQ2
Hi Amanda,
Thank you for your inquiry. Based on the information you have provided, it sounds like you may have to replace the water inlet valve with thermistor as there may be an issue with the screens. I hope this helps. Thank you and have a great day!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Wendi
April 15, 2018
Hi, i have a Roper wpw10144820. The water has a slow drip into the washer when it's not in operation. It looks like the inlet valve could be the issue, but i wanted to check with you first. Thanks in advance for your assistance!
For model number WPW10144820
Hi Wendi,
Thank you for your question. If the washer is leaking when it is not in use, then the issue is the water inlet valve and you will need to replace it. The reason this is happening is a part inside the water inlet valve has malfunctioned. I hope this helps. Thank you and have a great day!
9 people found this helpful.
Was this helpful?
Thank you for voting!
BILL
February 25, 2018
I have Admiral washing machine that is filling very slowly. I only have cold water for it, is there another inlet water valve for cold i can used? If yes can you give me part number?
For model number ATW4475XQ0
Hello Bill, thank you for your question. If the appliance is filling very slowly the Water Inlet Valve with Thermistor WPW10144820 would have to be replaced. Unfortunately, there is no way to replace just the cold valve portion of the valve. This is the only replacement valve that will function properly on your unit. I hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
January 30, 2018
Washer starts filling at normal speed but then fills extremely slowly. Changing water level or water temperature does not change the problem.
For model number WTW5200VQ2
Hi Richard,
Thank you for your question. If the water is filling slowly into the washing machine, the issue is likely with the water inlet valve. Check the screens on the valve to see if there are any debris on them. The screens are delicate and may be damaged if clean. So if there is debris, the valve may need to be replaced. Also check the hoses also as they may be clogged as well. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Becki
September 16, 2017
Hot water leaks in tub while machine is off
For model number wpw5200vq2
Hi Becki,
Thank you for your inquiry. If there is water leaking into your washer when it is off you will need to check and possibly replace the water inlet valve. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Omer
December 23, 2017
Water temperature does not go to hot. After turning it a few times it goes to hot?
For model number wtw5300vw
Hello Omer,
Thanks for your question. We would advise testing the water inlet valve with a multi-meter along with the temperature switch to see if they have continuity. Replace either of them if they do not show continuity. If those parts test correctly, consider examining the pump itself for any signs of damage and replace it if needed.
I hope this helps.
My washer will not fill with water. It first began during rinse cycle only, now will not fill at all. Once the washer has been filled with water (using buckets) it will run entire wash cycle. (filling again for rinse cycle using buckets) it will finish the washing cycle specified on dial knob. But i am not sure which part to get. My father replaced the lid switch but did not solve the problem. Is it the water inlet switch i need to replace or the cycle dial control knob.
For model number ETW440WQ0
Hello Jessica, Thank you for the question. This does sound like an issue with a defective water inlet valve and it would need to be replaced. Thank you for your inquiry, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Troy
October 24, 2017
Washer fills to correct water level in wash cycle, but only 1/3 in rinse. Drain has good air flow, no vacuum siphoning is occurring. I assume there is only one level sensor/pressure switch, so I'm at loss to understand the issue.
For model number RTW4440XQ0
Hi Troy, Thank you for the question. I suggest replacing the Timer,PartSelect Number PS11750181.The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
