Washer Water Inlet Valve with Thermistor WPW10144820 | Official Whirlpool Part | Fast Shipping | PartSelect
Washer Water Inlet Valve with Thermistor – Part Number: WPW10144820
Washer Water Inlet Valve with Thermistor – Part Number: WPW10144820 Washer Water Inlet Valve with Thermistor – Part Number: WPW10144820 https://partselectcom.azureedge.net/Schematics/Whirlpool/91JH3SCB.gif

Washer Water Inlet Valve with Thermistor

PartSelect Number PS11749042

Manufacturer Part Number WPW10144820

Manufactured by Whirlpool

Product Description

Washer Water Inlet Valve with Thermistor Specifications

This part is used to help control and balance the water temperature flowing in to the washer tub.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Will not stop filling with water | No hot or cold water | Leaking | Will not fill with water

This part works with the following products:

Washer.

This part works with the following brands:

Kenmore, Whirlpool, Maytag, Amana, Roper, Crosley, Inglis, Admiral, Estate.

Part # WPW10144820 replaces these:

AP6015761, W10144820, W10311458, WPW10144820VP.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
25 questions answered by our experts.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Part Videos

Replacing your Kenmore Washer Washer Water Inlet Valve with Thermistor

Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 15 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Barb from Blackriver Falls, WI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WPW10144820
fill valve bad
took back off then removed valve replaced with new one works good
117 of 177 people found this instruction helpful.
Was this instruction helpful to you?
Melanie from Farmersville, OH
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
Parts Used:
WPW10144820
water would not shut off from running in to washer
contacted "just answer" on web. they diagnosed problem and suggested repair part. Ordered part from "part select". Great service and fast shipping from part select. Replaced part in 15 minutes and up and running! :)
65 of 75 people found this instruction helpful.
Was this instruction helpful to you?
Patricia from Rose, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPW10144820
water would not stop filling and would overflow flooding floor
replace part, which we received within one and half days and it works great. very satisfied
32 of 49 people found this instruction helpful.
Was this instruction helpful to you?
Kathleen from Live Oak, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
WPW10144820
PLASTIC intake froze causing a cracked in the hose thread input connection
Removed the back washer panel,unscrew the control/dial panel section from main washer body, remove part. Insert new part and put everything back in place. Really quite simple. DONE.
29 of 54 people found this instruction helpful.
Was this instruction helpful to you?
Lee from STATE COLLEGE, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPW10144820
No hot water
Easy, used youtube video for repair info.
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
James from SPRING HILL, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WPW10144820
Water would not shut off.
Followed the online video.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Steven from LEWISTOWN, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WPW10144820
No Cold Water
Be careful to make it a point to remember how you take things apart and in what order. If you have a cell phone take pictures as you go so you can refer back if you forget how something was. From the back of your washer, you will find two Phillip head screws, one on the left and one on the right, which hold the top controls panel in place, back these two screws out until the panel becomes disconnected. Remove the four nut driver screws from the back panel, two at the top, two at the bottom. At the top of the washer under the loosened control panel you will see two brass finished snap brackets. Pop these loose with a screw driver, lift up the back panel slightly, note how it is held in place at the bottom so you can get it back in place correctly when reassembling. Now you are in! Unplug the old unit and pop it off the panel. Plug in the new one and reverse the way you took it all apart. Hope this was helpful!
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
christine from ONEONTA, NY
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
Parts Used:
WPW10144820
Water stopped coming in and stopped filling
Took back off washer, changed part, plugged back in and turned on, works like new
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
kathy from SANTA MARIA, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench (Adjustable)
Parts Used:
WPW10144820
leaking water on floor
Unplug the washer and shut off water supply and disconnect hoses from machine.Unscrew and lift the instrument panel on the top of the washer back, and pull the front of the washer forward,,unplug the inlet valve and plug the new one in . Put it all back together like it was, and it worked perfect .Not bad for a grandma!!
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
JUAN from HARLINGEN, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPW10144820
Tub would not stop filling with water.
Remove the front cover. Remove the old. water inletvalve and replace with the new valve. took me about thirty minutes.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
23 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    22
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11749042
Manufacturer Part Number: WPW10144820
Brand
Model Number
Description
Kenmore
11018812701
Washer
Kenmore
11020522900
Washer
Kenmore
11028222701
Washer
Kenmore
11029422801
Washer
Kenmore
11029432801
Washer
Kenmore
11029442801
Washer
Kenmore
11029522801
Washer
Kenmore
11029532801
Washer
Kenmore
11029592801
Washer
Kenmore
11029622801
Washer
Kenmore
11029632801
Washer
Kenmore
11029672801
Washer
Kenmore
11029682801
Washer
Kenmore
11029692801
Washer
Kenmore
11029722801
Washer
Kenmore
11029727801
Washer
Kenmore
11029732801
Washer
Kenmore
11029737801
Washer
Kenmore
1105062110
Washer
Whirlpool
1CWTW5200VQ1
Washer - Residential
Whirlpool
1CWTW5300VW1
Washer - Residential
Whirlpool
1CWTW5505VQ1
Washer - Residential
Whirlpool
1CWTW5590VQ1
Washer - Residential
Whirlpool
1CWTW5790VQ1
Washer - Residential
Maytag
7MMMS0560WW0
Washer - AUTOMATIC WASHER
Maytag
7MMTS0520WW0
Washer - AUTOMATIC WASHER
Admiral
ATW4475VQ0
Washer - RESIDENTIAL WASHER
Admiral
ATW4475VQ1
Washer - AUTOMATIC WASHER
Admiral
ATW4475XQ0
Washer - AUTOMATIC WASHER
Crosley
CAWS14234VQ0
Washer - Residential