Quick Question!

Have you ever purchased from PartSelect.com before?

11748908-1-S-Whirlpool-WPW10137519-Elbow, Fill Tube
11748908-1-S-Whirlpool-WPW10137519-Elbow, Fill Tube 11748908-2-S-Whirlpool-WPW10137519-Elbow, Fill Tube 11748908-3-S-Whirlpool-WPW10137519-Elbow, Fill Tube https://partselectcom.azureedge.net/Schematics/Maytag/55931.gif

Elbow, Fill Tube

Your Price

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11748908
Manufacturer Part Number WPW10137519
Manufactured by Whirlpool

Also known as icemaker fill tube. This part is used to supply water to the icemaker from the water line.

This part works with the following brands: Amana, Maytag, Whirlpool, Kenmore, KitchenAid, Jenn-Air, Dacor, Crosley, Hardwick, Gaggenau, Gibson, General Electric, International.

This part works with the following products: Refrigerator, Ice Maker.

This part fixes the following symptoms:

  • Leaking.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful


Does the fill tube replacement part come with the tiny tube insert?

Lily for model number GB2SHTXTS02

Hi Lily, Thank you for your question. This is just your fill tube. The image that we have of the part up above there is how the part comes to you when it is ordered. I hope that helps! Good luck with your repair.

1 person found this helpful.

Most Recent


Ice maker fill tube.....what is the proper entry into the ice maker? What should it look like? I had previous trouble after installing a new ice maker, 1st water sprayed all over the freezer, then I cut the hose a little thinking it was too long. The spray stopped but now the water leaks into the bottom of the freezer, ice tray does not fill completely, small cubes produced. How should the filler tube entry into the ice maker look?

Clem for model number GB2SHDXPB01

Hi Clem, Thank you for the question. When looking at the ice maker when it is installed you should be able to see the water line coning in the back of the appliance and into the water fill cup on the back of the ice maker. Hope this helps!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 3 reviews What's this?
1-3 of 3

54 of 68 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: Richard from Yarmouth, ME

Leak at fill tube

Removed two screws that held cover plate. remove cover plate. Remove water hose, and clamp, by compressing clamp with pliers. Remove fill tube by pulling HARD, from back.

Replace fill tube, check to be sure that it entered ice maker properly. Replace hose and clamp.
Replace cover and screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

26 of 35 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Dave from dunwoody, GA

No ice in ice maker

Turn water and refrigerator off, use hair to thaw the ice maker filler tube, then remove the filler tube inside the freezer. Next remove the water supply line cover plate in back of the refrigerator. Now remove the speed clip at the white pvc elbow and pull out the supply line. Next, grasp the pvc elbow with pliers and pull hard to remove. The new filler tube is a 1 piece design (filler tube and elbow combined) and needs to be cut to the proper length. Mark it inside the freezer, remove it and cut to length. Now coat the outside flange with caulk or PU glue and snap into the opening. Put the speed clip on the elbow first and center it. Ensure that the spreader insert is in place in the plastic tube, then slide the supply line into the elbow untill completely engaged. Replace cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Elbow, Fill Tube
Level of Difficulty: Very Easy
Time to do repair: 15 - 30 mins
Tools: Pliers
Customer: David from VESTAL, NY

Old fill tube was blocked

Cut old fill tube into pieces, removed and replaced with new tube. Extremely easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11748908
Manufacturer Part Number: WPW10137519
Brand Model Number Description
Kenmore10672002011Refrigerator - REFRIGERATOR
Kenmore10672002013Refrigerator - REFRIGERATOR
Kenmore10672003010Refrigerator - REFRIGERATOR
Kenmore10672003011Refrigerator - REFRIGERATOR
Kenmore10672003012Refrigerator - REFRIGERATOR
Kenmore10672003013Refrigerator - REFRIGERATOR
Kenmore10672003014Refrigerator - REFRIGERATOR
Kenmore10672003016Refrigerator - REFRIGERATOR
Kenmore10672003017Refrigerator - REFRIGERATOR
Kenmore10672003018Refrigerator - REFRIGERATOR
Kenmore10672009010Refrigerator - REFRIGERATOR
Kenmore10672009011Refrigerator - REFRIGERATOR
Kenmore10672009013Refrigerator - REFRIGERATOR
Kenmore10672009015Refrigerator - REFRIGERATOR
Kenmore10672013017Refrigerator - REFRIGERATOR