The temperature sensor measures the temperature inside the oven. If your oven is too hot, not heating evenly, is not heating enough when baking, or simply will not start, you could have a faulty temperature sensor. A faulty temperature sensor can be a fire risk. If your sensor is not working properly, you should look to replace it straight away. A failed oven sensor is most often responsible for F3 or F4 error messages on electronically-controlled ovens. Make sure you disconnect the power to your range before you start your repair.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your KitchenAid Wall Oven Temperature Sensor
Troubleshooting
This part fixes the following symptoms:
Oven is too hot | Little to no heat when baking | Oven not heating evenly | Will Not Start
This part works with the following products:
Wall Oven, Range, Microwave Oven Combo, Cooktop.
Part# WPW10131825 replaces these:
AP6015486, 4455636, W10131825, WPW10131825VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.7
Filter By Rating:
5 Stars
5
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Donald W - January 2, 2023
Verified Purchase
Easy repair
Came quick
★★★★★
★★★★★
Kenneth D - April 22, 2022
Verified Purchase
Built in Oven working great now
Built in Oven would not come up to temp and would drift lower during cook time. Ordered temp sensor for make and model, easy replacement oven works great now. Part listed and ordered based on manufacturer and model number--PartSelect made finding part easy
★★★★★
★★★★★
Howard H - January 6, 2022
Verified Purchase
Heat Sensor for oven
The part did not fix the oven. The service tech said it was either the heat sensor or the control system and we decided to take a chance on the heat sensor. I think the end result will be a new oven. It wasn't the fault of the part.
★★★★★
★★★★★
Matthew C - November 26, 2020
Verified Purchase
Fixed
Perfect match, went in easy and my oven is fixed!
★★★★★
★★★★★
Nick R - January 29, 2019
Verified Purchase
Often Sensor
Replacing the oven sensor was very simple process and solved the problem with oven locking up.
★★★★★
★★★★★
Rick S - August 29, 2018
Verified Purchase
Great Customer Service
I ordered the temp sensor and received it about 5 days later, when I went to install i opened the package and saw that the flange or piece where the screws go in was bent somehow in transit. I could see on the bubble wrap where it cut into it from the inner package. Something was put on top of this package that was pretty heavy. When I called and spoke to I think Ryan I explained the situation and he didn't hesitate to ask if he could send out a replacement unit which he did. I was surprised to see arrive in 3 days this time and was able to get it installed and get our oven working once more. Great Customer Service!!! Was very well pleased with how he handled the issue. the only thing was he didn't know if I should return the damaged unit, so I am just going to hold on to it for now unless you want to send a return package label to me. Thank you, Rick
★★★★★
★★★★★
Debbie R - February 16, 2018
Verified Purchase
Temperature Sensor
Everything went great. The ppl I spoke with were VERY helpful. However it didn’t fix the problem. So we are back to square one trying to figure what is the problem. I’ll call for the part when we figure this out. THANKS EVER SO MUCH!!!!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven will not maintain set temp
Remove rear panel - remove sensor from inside - unplug from rear - reverse to install - did not fix problem
Sam from TINLEY PARK, IL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bUILT IN OVEN NOT COMING UP TO TEMPERATURE
Replaced oven temp sensor, removed oven door and interior racks for easy access to oven upper rear sensor access. Used philips head screw driver to remove both screws, gently pulled old senor out of reat oven wall until electrical connector clear of rear wall, disconnected connector, connected new sensor and gently pushed wiring and conne
... Read morector back into opening, reinstalled door and racks. Ran open thru cycle and used oven thermometer to check temp. fast easy install
Read less
Kenneth from BUFFALO, NY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The oven was over heating because it wasn’t reading the temperature
Pulled the stove out, unscrewed the back and plugged the new thermostat in. Screwed the back back on
LAURIE from BILTMORE LAKE, NC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broil element burned out/temp sensor questonable
I followed instructions from the videos provided on the Part Select site. As with many such appliances, parts are interchangeable between brands. this unit is a KitchenAid but Whirpool,Kenmore parts interchange...Access from the front is all that's needed however and the only tool required was a phllips head screw driver...the only nega
... Read moretive surprise (which the video warned about but I ignored) was the risk of the element leads drawing back through the holes, which 2 did. Save yourself that trouble by securing the wires to the back oven wall with a small strip of duct tape until you're ready to re-attach them to the new element. This necessitated removing the oven entirely for access to the back; the most time consuming aspect being removing/replacing what seemed like 20 odd screws holding the back cover in place! If not for that mistake, entire job would have been under 30 minutes. Well worth the effort and would do it again!
Over heating oven and uneven baking. Oven thought it was in self cleaning mode.
Sensor replacement was removing 2 screws and gently pulling on old sensor until the clip comes out. Secured the other end of the wires so that it did not fall back inside. Then connected the new sensor clip to the oven wire, then gently returning wire into oven, and then screwing the sensor into place. The baking eleme
... Read morent was easier than the sensor. Removed the 2 screws holding the element into the back bottom of the oven, and pulled the element forward to disconnect from clamps. Inserted new element into clamps and screwed it in. ***NOTE that there will be a smell from the new element. This smell is normal. If the smell continues after a couple minutes stop the oven and wait an hour before reattempting.
Ask our experts a question about this part and we'll get back to you as soon as possible!
28 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sean
October 17, 2017
When I turn on my top oven after about 5 minutes of preheating the door lock engages and i get the error code f3 e2. Do you know what can cause this? Thank you
For model number RBD245PDQ15
Hi Sean, Thank you for the question. The error indicates an issue with the Temperature Sensor. You can try to disconnect power or unplug the appliance. Check the temperature sensor wire to see if it is loose. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC). Hope this helps!
23 people found this helpful.
Was this helpful?
Thank you for voting!
Ellen
November 29, 2018
Whirlpool built in oven model #rbs305pd016. When the oven reaches the "set" temp. It doesn't shut off and just keeps getting hotter. Do i need a new heat sensor? Do you know the part number?
For model number RBS305PD016
Hello Ellen, thank you for your question. Yes, it sounds like a temperature sensor issue. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC). Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Rick Szymanski
January 30, 2018
Oven will only heat up to 300 degrees no matter what i set the temperature at ,also will stop the heating process after it reaches the set temp. Act like its working fine ,just wont restart,to maintain set temp
For model number kgrk806pss00
Hello Rick, Thank you for your inquiry. We would recommend checking the following parts to fix your issue: temperature sensor, high limit thermostat, thermal protector thermostat, fixed thermostat, and control board. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Dale
September 5, 2017
Can you provided directions for installing the oven temperature sensor. My oven does not heat; it does not even begin to heat. Yet the indicator shows that the oven is on. I please.
For model number KDR 463LSSO
Hi Dale,
Thank you for your inquiry. For information on how to install the temperature sensor, there is a video listed under the photo of the part that you may reference on how to install the part. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Amanda
August 8, 2019
My oven will sometimes heat fine, but other times will not heat to set temp. It used to be mostly after i had been using the oven, then turned off, then back on after a brief rest. It seems to be more frequent and unpredictable now.Thanks for you help
For model number KDRP467KSS0
Hello Amanda, thank you for your question. It sounds like you have a bad oven sensor. We would recommend testing/replacing this part. PartSelect Number: PS11748765. I suggest testing the sensor. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC). Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Carole
March 18, 2018
Do you have a video for installation of temperature sensor for my slide-in stove?
For model number Kgrs807sss01
Hello Carole, Thank you for your inquiry. We do have an installation video for this part and I have included the link below. Hope this helps!
https://www.partselect.com/PS11748765-Whirlpool-WPW10131825-Temperature-Sensor.htm?SourceCode=4&SearchTerm=KGRS807SSS01&ModelNum=KGRS807SSS01#RepairVideo
2 people found this helpful.
Was this helpful?
Thank you for voting!
Temeka
February 18, 2020
Hello, we are getting a error message when turning the oven on.Error code f3 eo it says oven sensor - upper.
what is the part i need for this?
or how can i correct this error because sometime it works and other nothing.
For model number KDSS907XSP01
Hello Temeka, thank you for your question. The oven temperature sensor for this unit is PartSelect Number: PS11748765. Yes, that error code is in relation to the sensor and replacing this part should fix the issue. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
August 31, 2017
My upper oven does not always heat up, wonder what my problem may be? Thanks.
For model number G80309PVS02
Hi Michael,
Thank you for your inquiry. If your upper oven is not heating up, the majority of the time it is the temperature probe, part number PS11748765, that will fix the issue. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dean
December 18, 2019
The element on this oven fried and needed to be replaced, so i ordered a new one from partselect and installed it. The oven would not come up to baking temperature as the preheating element shut off prior to getting up to temp. I surmised that the temperature sensor was likely damaged when the element was melting down, so i ordered that and replaced it. The oven still does not come up to temperature. What else could be the issue?
For model number KEMS308SSS05
Hello Dean and thanks for writing.
You might have to calibrate the oven. Check the manual for instructions. We hope this helps. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tina
November 14, 2023
Where is this part located on my stove I can not find it please thank you
For model number Wfg231lvbo
Hi Tina, thank you for reaching out. The part that you mentioned is not compatible with your model. The compatible oven sensor for your model is part number PS11749737. We have attached the relevant video to access the oven temperature sensor. This may not be of the same model but will help you to locate it. We hope this information helps!
