Part Location Diagram of WPW10128551 Whirlpool Freezer Evaporator Fan Motor - 115V 60Hz
See part 18 in the diagram
Replacing your Amana Refrigerator Freezer Evaporator Fan Motor - 115V 60Hz
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Freezer Evaporator Fan Motor - 115V 60Hz WPW10128551

★★★★★
★★★★★
8 Reviews

Rated by 8 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 75.22
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS11748697
Manufacturer Part Number WPW10128551
Manufactured by Whirlpool for Amana, Maytag, Whirlpool, Kenmore
Product Description

Freezer Evaporator Fan Motor - 115V 60Hz Specifications

This is an evaporator fan motor, it is 115 volts and 60 hertz and it is for your refrigerator/freezer. You will need to replace this part if your appliance is too warm or getting noisy. This evaporator fan motor is located in the back of the freezer. This part circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated throughout your appliance. To replace this part you will need a 1/4-inch nut driver and a pair of needle nose pliers.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Amana Refrigerator Freezer Evaporator Fan Motor - 115V 60Hz

Replacing your Amana Refrigerator Freezer Evaporator Fan Motor - 115V 60Hz
Troubleshooting
This part fixes the following symptoms:
Fridge too warm | Freezer section too warm | Noisy | Fridge and Freezer are too warm
This part works with the following products:
Refrigerator.
Part# WPW10128551 replaces these:
AP6015419, 10449508, 10449515, 67001087, 67001509, 67002056, 67003635, 67003636, 8170894, W10128551, WPW10128551VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
4.6
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    1
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 8 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Refrigerator was warm,freezer was cold
Unplugged refrigerator,cleaned out freezer.Removed shelves in freezer compartment(that took some figuring to unlock sliding sheves)Our freezer is on the bottom.Removed four screws from back cover to expose fan,removed screws and attached wires.Carefully opened plastic clips after pulling fan off shaft.Replaced old motor after reattaching rubber seals.Closed clips to hold motor and placed fan back on shaft.Reattach wires and screws. Put cover back and replaced shelves.Plugged in refrigerator and wallah refrigerator part was cold again!
  • Henning from RHINELANDER, WI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Thought motor was bad freezer cold fridge hot
Ordered new fan motor
Got part took fridge apart
Result was the motor was running
The fan blade had come off the motor
Replaced the motor anyway and reinstalled the fan, working well
  • Wayne from PENNINGTON, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fan motor noise
Followed the demo film on line.
Good instructions
Other Parts Used:
Freezer Evaporator Fan Motor - 115V 60Hz Evaporator Fan Blade
  • PAUL J from LANCASTER, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator wouldn't get cold enough.
Freezer would get cold at bottom and some of the refrigerator. Took of freezer back panel and located freezer fan. Took a meter and saw power was getting to it, but not working. Removed fan and replaced with new on, working like a charm. Cold air was not circulating enough throughout the unit because fan was not working. It was not the thermostat or adapter control.
  • Ty from Wentzville, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
20 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
refrigerator not cold but freezer was cold
removed ice maker and wire shelf. removed back panel screws and tilted forward. removed 2 screws holding motor bracket. swapped fan blade and reassembled
  • jarrett from PALM DESERT, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
65 of 79 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator wouldn't cool
First I removed the six screws from the cover. I then disconnected the two wires and pulled the small motor out with its base and removed two screws that hold it in place. I then changed the old one for the new one and set it back in its place. I then set the cover back and turned it on. I was happy again.
  • Fidel from Forest, MS
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The evap motor failed (no air movement inside of refrierater
Removed screws from cover tested for power to motor found power was on to motor but motor did not work. I went to your web site was able to locate part in about 5 minutes . Even with over night shipping the part came to about $50,00, far cheaper tha a service call would have been.

Thanks John Paulsell
  • John from Flagstaff, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
28 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
fridge side was not getting cold
first I removed the panels to see if the coils were getting frosty . Then I noticed that the fan was not spinning. I tested voltage to the fan and it was hot. I ordered the new fan put it in placve and, voila!.
Fixed my fride for under 50 bucks
Other Parts Used:
Freezer Evaporator Fan Motor - 115V 60Hz Crisper Frame Support
  • neil from murfreesboro, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
14 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

18 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank Mcmurry
October 28, 2019
The freeze is cold but the refrigerator is warm. Evaporator fan blows for a short time and then goes off.
For model number WRB322DMBW00
PartSelect logo
Hello Frank, thank you for your question. If the motor is turning on but not running long enough there could be an isuse with the sensor or the main board. We would recommend testing the thermistor, Thermistor Part Number: 12002355, first. As this is the sensor for the temp in the fridge and sends the information on the inner temp to the board to turn on or off the evaporator motor. If the sensor is fine, the main control board could be the issue. I hope this helps.

9 people found this helpful.

Was this helpful?
Thank you for voting!
Mike
February 4, 2020
Both refrigerator and freezer sections are warm (approx. 48>50 degrees) condenser fan is working and compressor runs as well. Have yet to check evaporations fan. Condenser is clean. There is air flow but the air temp is 48>50. Evaporations fan or thermostat?
For model number MBF1956HEW
PartSelect logo
Hello Mike, Thank you for the question. If the Fan at the back of the freezer is running then it is fine. You can test the Defrost Thermostat. The best way to do this is to remove the thermostat from the refrigerator so you can control the temperature of the sensor. You can let the sensor warm up to room temperature. With the sensor warmed up to room temperature the sensor should read approximately 6.2K Ohms at 68°F. With the thermistor submerged is a glass full of ice water, the sensor should be very close to 32°F which should read approximately 16.3K Ohms. If the values that you are getting are far off from these readings, then the sensor is bad and should be replaced. You can also Test the Thermister. At 70 degrees the resistance should be 9.3K ohms, 90 degrees would be 7.7K ohms. at 100 degrees would be 6.2K ohms, and 120 degrees would be 4.3K ohms. If the thermistor reads outside of range then it needs replaced. We hope this helps.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Ahmad
October 14, 2019
Hi i have Whirlpool freezer is in bottom and fridge is on top and fridge is too warm and freezer is cold but can is not circulating air, and there is ice on thermostat also. Is the fan have problem or anyother problem. Thanks
For model number Whirlpool Eb9fvbrws04
PartSelect logo
Hello Ahmad, thank you for your question. It sounds like the issue is with the fan motor. If the air isn't circulation and the motor is not turning the motor should be replaced. I hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Stephan
November 10, 2019
Hi there My Whirlpool refrigerator fridge section is warm but freezer is fine. I changed the thermistor in the fridge section and the problem still exist. A small amount of air is coming from the top intermittently but not enough to cool the fridge area. Can you please help. thanks
For model number GX5FHDXVY00
PartSelect logo
Hello Stephan, Thank you for the question. I suggest checking the Evaporator fan Motor to make sure it is running normally and circulating the air to the Fresh Food Section. Also check the Damper Control Assembly PartSelect Number PS11750106. Make sure it is opening and closing and allowing cold air through into the Fresh Food Section as well. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Wilmer
December 19, 2018
My fridge and freezer are too warm, i replaced the capacitor and the relay and it was working fine for 2 weeks but now the freezer works fine for couples days than everything melts, can it be the evapotor motor??? but i feel air floating
For model number Lsd2615heb
PartSelect logo
Hello Wilmer, thank you for your question. It sounds like the issue is with the control board itself. I would recommend testing the PartSelect Number: PS11743599 defrost thermostat as well as the heater PartSelect Number: PS11743581 just to be safe, but if the unit isn't cooling at all (fridge or freezer) and the compressor parts were replaced the board would most likely be the issue. I hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Paul
March 26, 2020
My condenser keeps freezing up ? The door seals look good but every month it freezes up ? Would the fan have anything to do with this issue ?
For model number ABB1924DEW
PartSelect logo
Hello Paul, thank you for your inquiry. The door gaskets would be the first parts to check over, if they are allowing warm air into the unit this can cause the coils to freeze over. The other parts that may be causing this symptom are the defrost heater, electronic control board, defrost thermostat, or the thermistor. You will have to test these parts with a multi-meter to determine which part has become faulty. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Roland
July 28, 2021
Refrigerator and freezer getting warm, evaporator fan not working did a continuity test and it shows good what would be my next step?
For model number ASD2626HES
PartSelect logo
Hello Roland, Thank you for the question. The Fan is controlled by the Electronic Control Board, PartSelect Number PS11755733. This issue could be caused by a defective Board. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Patti
April 23, 2023
Fridge is fine, freezer running about the same temp as the fridge. I vacuumed off the coils so I am thinking next step is the evaporative fan motor? Thanks.
For model number WRB329DMBM00
PartSelect logo
Hi Patti, thank you for your question. We have researched the model and would recommend checking the evaporator fan motor, part number PS11748697. The evaporator fan motor circulates air drawn from the freezer coils over the evaporator and throughout the freezer. If the evaporator fan motor is faulty, the freezer section might not perform proper cooling. Checking the evaporator motor for continuity using a multimeter might help. Good luck with the repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Crystal
August 14, 2019
My fridge part is not getting cold but my freezer is working. I can hear the fan running but i can not feel it blowing cool air. I have been told it could be the fan or the thermostat. These parts are confusing. What could it be?
For model number GB2SHDXTQ00
PartSelect logo
Hello Crystal, thank you for inquiring. You will want to consider either the Damper Control part number PS11743564 or the Condenser Fan Motor part number PS11750853 for your model. I hope this helps and good luck with your repair!

Was this helpful?
Thank you for voting!
Michel
August 15, 2019
No cold air blowing in the top (fridge). The freezer on the bottom is fine and has cold air blowing in at the rear grill. Replaced the control board and thermistor. How does the cold air flow to the top fridge part.
For model number WRB329DFBW Whirlpool Refrigerator
PartSelect logo
Good Day Michael. Thank you for your question in regards to your Model Number WRB329DFBW. Unfortunately we were not able to locate the information you were looking for. We would recommend reaching out to the manufacturer at 800-807-6777 for further assistance. Their hours of operation are are Monday to Friday; from 8:00am to 8:00pm Eastern Time. Best Regards.

Was this helpful?
Thank you for voting!
  • 1
  • 2
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748697
Manufacturer Part Number: WPW10128551
Brand
Model Number
Description
Kenmore
10669312310
Refrigerator - REFRIGERATOR
Kenmore
10672013017
Refrigerator - REFRIGERATOR
Kenmore
59650002100
Refrigerator
Kenmore
59650003100
Refrigerator
Kenmore
59650004100
Refrigerator
Kenmore
59650009100
Refrigerator
Kenmore
59650012100
Refrigerator
Kenmore
59650013100
Refrigerator
Kenmore
59650014100
Refrigerator
Kenmore
59650019100
Refrigerator
Kenmore
59651672100
Refrigerator
Kenmore
59651673100
Refrigerator
Kenmore
59651674100
Refrigerator
Kenmore
59651679100
Refrigerator
Kenmore
59652672200
Refrigerator
Kenmore
59652672201
Refrigerator
Kenmore
59652672202
Refrigerator
Kenmore
59652673200
Refrigerator
Kenmore
59652673201
Refrigerator
Kenmore
59652673202
Refrigerator
Kenmore
59652674200
Refrigerator
Kenmore
59652674201
Refrigerator
Kenmore
59652674202
Refrigerator
Kenmore
59652679200
Refrigerator
Kenmore
59652679201
Refrigerator
Kenmore
59652679202
Refrigerator
Kenmore
59653462301
Refrigerator
Kenmore
59653462302
Refrigerator
Kenmore
59653463301
Refrigerator
Kenmore
59653463302
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service