See part 4 in the diagram
( Grid squares measure 1x1 inch )
LED Display Board
$
144.22
On Order
On Order
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS11748663
Manufacturer Part Number WPW10124269
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Microwave.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WPW10124269 replaces these:
8205663, W10124269
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Del
December 13, 2017
I purchased the display module and want to know how to remove the front panel to access the repair area. Help please! Thanks, Del
For model number kbms1454sss1
Hi Del, Thank you for the question. Unplug microwave oven from the power source. Next if the appliance is mounted remove it from its mounting location. Remove the eleven screws from the top cover of the appliance. Lift up on the back of the cover, and slide the spring tab out of the control panel slot and remove the cover.Discharge the high voltage capacitor by touching the blade of the screwdriver to one of the capacitor terminals and hold it there for a few seconds, do this for each terminal and make sure the screw driver has a insulated handle. Disconnect the ribbon cables from the user interface board . Remove the user interface board from the holder and the unit. Remove the two screws from the user interface board holder and remove the holder from the panel. Remove the four screws from the control panel assembly and remove the assembly. To remove the LED display, press out on the four holder clips, and pull the display out of the holder. Reinstall in reverse order. Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Paula
September 18, 2019
The display panel does not properly display. Is the led display panel what i need?
For model number KBMS1454sss-1
Hello Paula, thank you for inquiring. Yes, replacing this LED Display Board part number PS11748663 for your model should fix the problem. You may also want to consider the Electric Control, part number PS11750242. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Nigel
May 10, 2019
I want to replace the digital display on the microwave. You gave a description on how to do this in an answer to a previous previous question and it sounds fairly easy. You say to discharge the capacitor by touching the terminals with an insulated screwdriver. To do this do you just touch the terminal or do you have to touch the driver between the terminal and the frame of the cooker. Is it safe to do this without damaging any other pasts of the electronics. Some people say you have to discharge through a resistor. Want to make sure i know what i am doing before i order the new digital display.Thanks
For model number KBMS1454SSS-1
Hello Nigel, thank you for asking. The previous answer was correct, discharge the high voltage capacitor by touching the blade of the screwdriver to one of the capacitor terminals and hold it there for a few seconds. We hope this answers your question.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Customer Reviews
Filter By Rating:
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
EJ W - January 9, 2019
Replace display in microwave
Easy to install and works just like it was new! Very happy. We had 6-7 segments out. Wish we had done it sooner.
Randall C - June 13, 2018
Easy repair with a part that fit.
Job took literally 20 minutes from start to finish and the part worked perfectly. Will definitely go to part select in the future.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748663
Manufacturer Part Number: WPW10124269
Manufacturer Part Number: WPW10124269
Brand
Model Number
Description