This part continually measures the amount of water entering the tub. It will make adjustments if too much or too little water is present.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Washer Flowmeter
Troubleshooting
This part fixes the following symptoms:
Leaking | Will not drain | Will Not Start | No hot or cold water
This part works with the following products:
Washer.
Part# WPW10110225 replaces these:
AP6015043, 8181696, W10110225
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.7
Filter By Rating:
5 Stars
8
4 Stars
1
3 Stars
1
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
John F - May 5, 2022
Verified Purchase
Very Happy
Part fit and worked well. Great part identification and ordering process. I really appreciated the instructional videos
★★★★★
★★★★★
David A - November 14, 2020
Verified Purchase
Correct, and fixed the issue
Part was shipped quickly, was as described. Repair was made with no issues
★★★★★
★★★★★
Robert4246 M - September 6, 2020
Verified Purchase
Great part
This part fixed my machine...thank you!
★★★★★
★★★★★
Ken L - August 18, 2020
Verified Purchase
FLOWMETER REPLACEMENT
Replacement parts arrived and followed the on line instruction video and the installation went flawlessly.......THANK YOU !!!
★★★★★
★★★★★
Barbara P - August 16, 2020
Verified Purchase
Right fit for washer, wrong part ordered
The flowmeter is correct but missing the wire that connects to computer control. I’ll find the serial number and order right one. This one I’ll give to my brother. It’s not your fault but mine
★★★★★
★★★★★
Mary L - May 20, 2019
Verified Purchase
Easy fix, works great.
The part arrived on time and had us up and running. Very easy install. Very easy fix. Interestingly, our wash cycles are quicker. I think the old part had been going out for some time now. I'll look to PartSelect for all my appliance repair pats.
THANK YOU!!!!
★★★★★
★★★★★
Clara C - November 1, 2018
Verified Purchase
Good quality!
It’s very well made it looked a little different than my original but I figured it only got a new design same purpose, thanks so much for including an email with a video instrucción my husband installed it very easily ,apréciate the fast service.
★★★★★
★★★★★
Ben D - August 21, 2018
Verified Purchase
Amazing!
This site saved me a $1,000. I thought for sure I would have to buy a new washing machine. I tried 4 to 5 YouTube videos and they no help. This site told me 51% of the time this will solve your issue. $50 later and my washing machine is working like new! I could not ask for more from the site.
★★★★★
★★★★★
Darrel W - February 16, 2018
Verified Purchase
worked perfect
read some reviews and watched your videos and things worked great, easy to do!
★★★★★
★★★★★
Ronald Z - February 1, 2018
Verified Purchase
Replace flometer
Excellent service and instructional video put my washer back into working order quickly, Thanks.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 12 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Inlet valve was stuck in open position allowing washer to fill with water when not in use.
Removed lid. Took old parts off and replaced with new parts. Also replaced hoses while washer was moved away from wall.
Water inlet valve - srew to hold in place did not line up (piece has been modified by at least 1/4 inch.
Need to elongate the hole in the frame to allow the screw that holds the valve in place to be inserted. You could not even start it as is. Also it put pressure on the valve so it would not seat properly. Need to include in the instructions you may need to elongate this opening in order to complete this repair. Other than that is was extre
... Read moremely easy. Parts fit well. Video instructions were great. Other than not knowing about the valve screw placement changing both pieces were extremely easy. Washing machine was repaired within minutes and is functioning properly again. Even the diagnosis tool was excellent as I have no experience with repairing washing machines but your site helped me trouble shoot the issue, order the parts (and receive in a couple of days) and replace the defective pieces in minutes. Changing these 2 items got me up and running an days and cost significantly less than what a repairmen would have charged just to show up at the door. Appreciate all your help!
Brother who used to sell appliances opened the washer door and read the booklet inside the washer telling him the part necessary to repair the problem. $33/00 for the water flow meter Part and shipped in next morning and arrived overnight. Excellent service for only $7.00 shipping. Highly recommend this place for parts. This was after a
... Read morecouple of days searching the internet for those with the same problem and not receiving and exact part to fix the problem
Read less
LAVERNE from NIANTIC, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
10 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was giving F20 F35 and SUDS error messages
After replacing the Water Inlet Valve and Flowmeter the F20 error message stopped. However, after ordering and replacing the Water Pressure Sensor the F35 error message and the SUDS error message stopped and the washer is finally working.
remove 3 screws of top panel at rear. slide top to rear 1/2 inch and lift up. disconnect wire to flometer, remove clamps on hoses and remove, reverse to install. did not fix problem. ck'd screens at fill valves. ordered new fill valves--problem solved. solenoids must not have been opening up all the way.
robert from LITLE RIVER, SC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
17 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Constant washer Faulting with a FH fault code
This washer had been faulting since it was 1 year old but it only happened 1 to 2 times a year. As the fault problem became more often, I realized it was a hardware or computer malfunction. But what was the problem? Well the problem always was a faulty flow meter. I replace the valve and the flow meter. But I tested the flow meter several
... Read more times.-- I replaced the flow meter and the valve. And for once in 5 years it did not fault.
Serviceman had previously replaced the hot and cold inlet valves, but the low pressure error persisted. Rather than cough up another $130 for the serviceman to return, plus parts and time, I decided to order the replacement flowmeter from PartSelect.
Unplug power and turn off water. Top of machine comes off by removing three sc
... Read morerews at top rear; use socket, spanner or T20 driver. Unplug electric sensor from flowmeter. Old unit is removed, and new one connected to water line by squeezing spring-clips with a pair of flat nose pliers. Reconnect electric sensor.
Great move, easy, and saved myself the thick end of $200.
Read less
John from Rye Brook, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
13 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
error F28 in mid cycle
check error code : no water flow pulled hoses [hot& cold] to clean screen in line. pulled flow meter out from under top of hood to clean and check free wheel movement inside. still error code F28 in mid wash cycle. called in and talk with service: he explained that hot& cold water valve was opening to slow or not enough fo
... Read morer flow meter to read full presure. I replace water valve and flow meter. washer is doing fine. [I was getting readly to go in futher down the line and get new controler. talking to service stop me from spending a lot of money. THANK YOU
Take off top of washer and the flowmeter is in the back lefthand corner on the top of the washer. Replaced the water level switch on the top righthand of the machine also. Got about 150. 00 Total invested w/service call from local tech. F-20 has not came back yet. I hoped it fixed it washer is only 3 yrs. Old. -Gd
GARY from CLARKSVILLE, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
7 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washing machine giving f20 error code
removed washer top, checked supply hoses and inlet valve to make sure not clogged, replaced valve and while already there replaced flowmeter, reinstall top and hoses and checked machine operation, machine working fine and wife thinks i am her hero
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
17 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
August 9, 2017
I get the f20 on small cycle and big cycle.Its seems to be ok on the reg cycle.On the small load cycle it shuts off and i get the f20 code and water is still in the drum.Will the flow meter cause this problem as well? Thanks
Hi Ken,
Thank you for your inquiry. The F20 error code is no water detect error. It means you either have very little water coming into the washer or no water is coming into the washer. In this situation where there is water coming into the washer it may be a siphoning issue. You will need to check the following: You will need to see if the hoses have any obstructions preventing the proper flow of water.
You will need to check the drain pump to see if it is working correctly. You will also need to check the wiring connections to the electronic control board, the water inlet valve, the pump and the pressure switch. I hope this helps with the repair. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Ken
August 9, 2017
Why does the machine give me a f20 code and shuts off only in the small load and large loads and works great in the reg wash load.
Hi Ken,
Thank you for your inquiry. The F20 error code means that you have a water supply issue. Press pause/cancel 2 times and if that does not clear the error code from your appliance you should check your inlet hoses to see if they are bent or damaged in any way. If everything on the outside of your machine is fine. You should check your water inlet valve for any damage and also test it with a multi-meter to see if it is the problem. Good luck.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Matthew
April 12, 2018
Hi i have this Maytag and when i turn it on the water gushes out of the flowmeter wpw10110225 from the bottom of the unit i changed the flowmeter and installed a new one and i am still having the same problem what else could this be do you think the second flowmeter i got is bad as well.
For model number mhw9000yw0
Hi Matthew,
Thank you for your question. If the washer is leaking when it is not in use, the issue is likely the water inlet valve and it will need to be replaced. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Matthew
April 13, 2018
Hi i have this Maytag and when i turn it on the water gushes out of the flowmeter wpw10110225 from the bottom of the unit i changed the flowmeter and installed a new one and i am still having the same problem what else could this be do you think the second flowmeter i got is bad as well. This part wpw10110225 gushes water out from the top when in use when it’s turned off no water comes out of it
For model number wpw10110225
Hi Matthew,
Thank you for your question. The flow meter could be at fault for this issue happening, you will need to inspect it and also check the water inlet valve. If a component in the water inlet valve is not working correctly, it may cause this to happen. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Hod
February 28, 2020
Water seeps into tub when it is turn off. Could this be the water inlet valve is not completely closing?
For model number MFW9600SQ0
Good Day Hod. Thank you for your question in regards to your unit (Model Number MFW9600SQ0). Based on our research, this may be the result of the Water Inlet Valve (PartSelect Number PS11745050) being faulty and needing to be replaced. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
When facing the washer from the front, I would notice that fabric softener was leaking from the bottom left-hand side of the washer. I proceeded to clean out my clogged drain filter, swapped out the hot and cold washing machine hoses and also for good measure replaced the outer drain hose and it seemed to have fixed my issues for a little while.
However, I recently ran a Clean Washer with affresh cycle and right before the machine started to drain, the tub was FULL of detergent and I noticed that the bottom left hand corner was leaking again and I also noticed that the top left hand side of the washer, where you see those multiple holes on the back metal plate, also started to leak soap from those holes.
Can my problem be this flow meter? I would like your expertise advice before proceeding with this repair.
Thank you for helping me with my diagnosis.
For model number WFW97HEXW0
Hi Steve, thank you for contacting us. Based on our understanding of the issue, we would suggest checking the flowmeter, part number PS11748313, to fix the issue. This part continually measures the amount of water entering the tub. It will make adjustments if too much or too little water is present. If this is faulty, the dispenser will fill with too much water, causing the softener or detergent to leak. We hope this sorts out your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Henry
March 17, 2020
I have a Whirlpool wfw96heaco washer and it will not flush the fabric softener into the tub? I have run ohms test on all components but this, could this possibly be the problem? Not enough water pressure to get it through the dispenser tub??? any help would be much appreciated!!
For model number wfw96heaco
Hello, Thank you for your question. That could be the issue. However usually a dispenser issue is caused from the dispenser. We hope this helps.
Was this helpful?
Thank you for voting!
Andrew
June 11, 2019
I'm getting the f20 error code and I checked the water inline and it have plenty of pressure. I turn the washer on and it starts to fill I even see water flowing into the drum. Do you think the flow meter would fix this issue?
For model number WFW9500TC01
Hello Andrew, Thank you for the question. F20 Error Code. Whirlpool error code F20 appears when no water is detected entering the machine or if the pressure switch trip is not detected. If you still have watyer you may need a new switch, PartSelect Number PS11754448. Hope this helps!
Hi, some how-to videos indicate to install the flow meter horizontally rather than vertically (as you depict in your video) does this matter?
For model number WFW9400SW01
Hello J-P, thank you for your question. If the Inlet Hose and Flowmeter Hose are horizontal on your washer, then the Flowmeter will need to be installed horizontally, as it goes between the two Hoses. Good luck with your repair!
Was this helpful?
Thank you for voting!
Mark
February 20, 2020
Control panel lights up, after you press the start button door locks but no water enters the machine the voltage at the water valves is only 10 volts does this sound like a main control board problem? While watching the voltage reading at the water valves it's cycles several times with the consistent reading of only 10 volts
For model number WFW95HEXW2
Good Day Mark Thank you for your question in regards to your unit (Model Number WFW95HEXW2). Based on our research, you may need to replace one or more of the following parts in order to solve the issue that you are having: 1) Temperature Sensor (PartSelect Number PS11755214). 2) Door Lock/Latch (PartSelect Number PS11745083). 3) Flowmeter (PartSelect Number PS11748313). 4) Motor Control Board (PartSelect Number PS11753928). 5) Dispenser Actuator Switch (PartSelect Number PS11753574). 6) Noise Filter - 275V and 50/60Hz (PartSelect Number PS11753813). You can order these parts either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
