This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not drying dishes properly | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, Whirlpool, Estate, Inglis.
Part# WPW10082896 replaces these:
3379487, 8519830, W10082896
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Tigh W - February 20, 2018
Verified Purchase
Might have been the problem, maybe not
I bought this and the high limit switch, pretty sure it was the high limit switch but I replaced both, just in case. Good news is the dishwasher is heating and drying again!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
August 23, 2017
Are heating elements easy to replace in dishwashers?
Hello Peter, thank you for contacting us. We have a how to video that shows you how to remove and replace the dishwasher heating element. You can click the link below, hope this helps!
https://www.youtube.com/watch?v=Co8dQ7rzTMQ
2 people found this helpful.
Was this helpful?
Thank you for voting!
Frank
November 27, 2019
My dishwasher fails on the sanitizing cycle. I measured the temperature of the water at one point during the wash cycle and it was only 119 degrees f. So i assumed that the heating element is not working. I measured the resistance of the heating element and got 15 ohms. Is this what it is supposed to be? The incoming water is at 124 degrees f. If the heating element was broke i would have thought the resistance would be very high. So i am not sure what is going on.
For model number 665 13442K901
Hello Frank, thank you for writing. When testing the resistance of the dishwasher's Heater Element, you should receive a reading somewhere in between infinity and zero for it to be functioning properly. So your Heater Element tested okay. You will want to consider replacing either the High Limit Thermostat, part number PS11743423, or the Vent Assembly, part number PS11741358 for your model dishwasher from what you are describing. You should receive a reading of 0 when testing the High Limit Thermostat at room temperature with a multimeter. I hope this helps!
Was this helpful?
Thank you for voting!
Ugo
December 22, 2019
Water supply valve
For model number w10082896
Hi Ego, We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
