This part goes at the end of the rail to stop the dishrack from falling out.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, Whirlpool, Amana, KitchenAid.
Part# WPW10082861 replaces these:
AP6014921, 8270106, W10082861, WPW10082861VP
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barry
April 19, 2018
This part (#15 rail stop) is for one in the front not the one at the back, right ? Just want to make sure i order the right thing! Thanks
For model number 665.13269k111
Hi Barry, Thank you for the question. The PartSelect Number: PS11748191 is for the front of the rail. Hope this helps!
21 people found this helpful.
Was this helpful?
Thank you for voting!
Jeremy
July 23, 2019
Does this fit the left or right side rail end?
For model number WDT720PADM
Hello Jeremy, thank you for your question. This Rail Stop Clip for your model is used for both the left and right rails.
17 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
February 5, 2019
Is this also the clip that goes on the back upper left rail (as you’re facing the dishwasher)? It looks the same, but a previous answer indicates it’s for the front. Thanks!
For model number 1399K802
Hello Susan, thank you for your question. The back rail stop is different. This part number is Part Number: PS11746591. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Patricia
February 19, 2018
How do I install the dish rack stop clip #1446951?
For model number wdf540padw1
Hi Patricia, Thank you for the question. This part goes at the end of the rail and just snaps in place. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Marjorie
August 21, 2019
I do not understand how to put the clip on the front of the upper rail. It keeps falling off. Do you have a better picture of how to put it on and how it looks when installed.
For model number WDT72OPADW1
Hello Marjorie, Thank you for the question. The clip should just snap in place. If it is not staying in place, check the end of the rail for damage and wear or the clip its self. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Vernon
February 18, 2020
Part#wpw10082861
Is this item for just one stop, or for the pair of front of rack stops?
For model number WDTA50SAHZ0
Hello Vernon,
Thank you for your question. The rail stop clip is sold individually on our site. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
September 16, 2021
How do i put the front upper dishrack stop on the rail. I cannot seem to get it to fit. Is there a video or a good picture to show how it is to fit in place. I am now frustrated.
For model number WDF330PAHB2
Hello Bob, thank you for writing. Please see a video that should help with the installation. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Marjean
July 13, 2021
How do I get my dinner plates to fit in the bottom rack properly? They will not stand upright in the rack they fall forward causing them to fall forward. The tine adjuster doesn't make a difference when moved. They are large bowl style plates. I just had the dishwasher installed and I am very disappointed and contemplating returning it.
For model number KDTM404EBL0
Hello Marjean, Thank you for contacting PartSelect.com. We think she is a question for KitchenAid. We just have parts lists and diagrams. For more specialized assistance or to speak with someone about this, we would suggest calling KitchenAid directly. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Part Videos
Replacing your Kenmore Dishwasher Rail Stop Clip
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 5 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
These 3 parts were broken or missing.
I had to watch a You Tube Video and the Repair was basically snapping these parts on the rack and glide. No tools needed!
The circulation pump is a super easy fix and the installation video parts select has on its website is accurate. I felt the most difficult part of the repair was removing the dishwasher from the kitchen counter to make the repairs. After you get the dishwasher out, you pretty much just pop the old pump out with your hands and a flat head screwdriver. (The supplied video is spot on ) Installing the new pump will require a pinch plier or a hose clamp. I chose a new hose clamp as it is cheaper and I would never use the pinch pliers after this job.
Tipped over washer, removed attachment bolts, installed new pump by clamping water hoses. Be sure to use proper crimping pliers, not the generic slip joint pliers. Replacement pump included required new clamps.
al from Fuquay Varina, NC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I can not get the part to fit and stay in place.
It is a small plastic piece which serves as a stop on the right side of the upper rack. It is the correct part because it is identical to the left one of the same type. I tried clamping down with a pair of pliers but I am afraid of breaking it. With shipping this two inch piece of plastic cost $20, so I do not want to crack it. I am at a loss as to how to sit in in place.
Marilyn from TRINIDAD, CO
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken lower rack wheels, tine pivot, and rail stop clip
Easy, 5 minute repair. Snap off old, snap on new. I looked up on the manufacturer's website and got the replacement part numbers, then ordered on partselect for half the price.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kenneth S - July 25, 2023
Verified Purchase
Replacing rail stop clip
Received the rail stop clip in a timely fashion and it was in perfect shape. The instructional video was very helpful.. Next time I need a part PartsSelect will be my first choice,
★★★★★
★★★★★
Wendy V - December 26, 2022
Verified Purchase
Part was a perfect fit
This was the piece that keeps the top rack from sliding out of the track. Fit perfectly with my make and model.
★★★★★
★★★★★
Deborah P - October 22, 2022
Verified Purchase
Rail Stop Clip replacement
The part arrived very quickly. It was very easy to install the part. The top rack of the dishwasher now operates as it should.
★★★★★
★★★★★
Tami G - January 30, 2022
Verified Purchase
Easy Repair. Took 15 seconds
The part came quickly & worked well. Wish the shipping had been less!
★★★★★
★★★★★
Donald F - January 28, 2022
Verified Purchase
Dishwasher rail stop clip
Part fit well, was easy to install, and was delivered quickly.
★★★★★
★★★★★
Sally C - November 10, 2021
Verified Purchase
Not as easy as we thought
The part is the exact part that we needed but it wasn't that easy to put in. We were afraid to break it but eventually we did get in on.
★★★★★
★★★★★
Camille C - June 22, 2021
Verified Purchase
Easy repair
Easy repair and was the exact part needed to be a physical stop for the upper rack.
★★★★★
★★★★★
Kristine V - May 10, 2021
Verified Purchase
Easy repair
This part came fast. Super easy to clip on.
★★★★★
★★★★★
Bob S - January 13, 2021
Verified Purchase
Just what the doctor ordered!!!
What we needed and fit perfect.
★★★★★
★★★★★
James B - November 25, 2020
Verified Purchase
Worked Perfectly
Fast delivery and replaced the original part exactly
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748191
Manufacturer Part Number: WPW10082861
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
Your Subscriptions
Same-day Shipping
Ships from USA
1 Year Warranty
365 Day Returns
