As water is filling your dishwasher, a float rises along with it. When the float reaches a predetermined level, it shuts off the flow of water, thereby preventing a leak.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking | Will not fill with water
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Kenmore, Jenn-Air, Maytag.
Part# WPW10077871 replaces these:
W10077871
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
A leak in the bottom of the dishwasher
I turned off the power at the fusebox,then removed the front lower cover using a screwdriver. I then removed the complete assembly and reversed the procedure. Quite simple, and the info on Partselect saved me 85 bucks! I put Partselect in my "favorites" for future use.
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carson
February 10, 2018
Checked continuity on float switch...ok, replaced float itself, but water level is too high, float raises up but too late and dishwasher filling up with too much water and leaking
For model number KUDC03FVSS0
Hello Carson, Thank you for your inquiry. Since you've already tested the float/water level switch, the other part to test would be the water inlet valve. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Doug
November 20, 2019
Hi i recently asked about a leak with the float switch, and you replied.Thank you for the quick reply.
you provided me with the gasket part number, but the video provided was for replacing the electrical switch in the float switch. i need a video on replacing this gasket:
gasket part number ps11746142
ps, i may have voted no to "was this helpfull" i was hoping to get a chance to reply.
For model number 665.7796* or 665.7797*
Hello Doug, thank you for writing back. Sorry about that. This video for replacing a Float Assembly shows the process for the Gasket as well: https://www.youtube.com/watch?v=xZY_PIp1YRw. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Doug
November 20, 2019
Recently, we have started to leak around the float switch shaft. Part number found on the bottom part: W10175382. Can you provide instructions on how to remove the float switch? And can we just purchase a seal? Or do we need an assembly?
For model number 665.7796* or 665.7797*
Hello Doug, thank you for inquiring. For your model dishwasher, you will need the Gasket part number PS11746142. We have an installation video that will assist you with the Float Switch at the following link: https://www.youtube.com/watch?v=eIrrv0jxGi0&. Good luck with your repair!
Was this helpful?
Thank you for voting!
Daniel
March 4, 2022
The round plastic (grey) float seams to rise and fall easily. I noticed a small leak directly under it. I have determined that the float works and the plunger attached to it seams to be touchable from underneath. I am unable to remove the float. I don't want to break it. Is there a video showing how to do this. Thanks in advance.
For model number 665.77962K701
Hi Daniel,
Thank you for your question. We have included a link to one of our YouTube videos that you may reference on how to install the float. The dishwasher in the video may appear different from yours, but it will give you a general idea on how to install the part. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Steve
April 11, 2018
This dishwasher was removed and stored for a few months and reinstalled at different house and upon testing there is a slow drip from the overfill float and switch. What is the most likely problem? What part or parts should be replaced? Thanks.
For model number KUDS30IVWH4
Hi Steve,
Thank you for your question. If you are experiencing a leak coming from the float and switch, you will need to check these parts to see if they are working correctly. You should also check the water inlet valve. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Steve
February 21, 2019
Does the float assembly come with the nut and gasket, or do I need to buy those separately?
Hello Steve, Thank you for the question. This is just the float, the nut and gasket are sold sepratley. Hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
