Feed Tube with 3rd Level Spinner

Hi Ray, Thank you for contacting us back. Sorry for the mix up there. Yes the tube comes with the gaskets that fit into the 2 holes on the tube that #9 slips into.Unfortunately the gaskets are not sold separately from the feed tube assembly. Hope this helps!

Hello Ann, thank you for inquiring. It is only included with this Feed Tube with 3rd Level Spinner replacement for your model.

Hi Benjamin, Thank you for your question. It does not come with part number 9 however it does come with your upper spinner. I hope that helps. Good luck with your repair.

Hi Lila. You will want to check the lower spray arm. Check to make sure nothing is clogged or gunked up and the seals are not damaged. Thank you for your question and good luck with your repair.

Hello Amber, Thank you for your inquiry. We would recommend checking first to make sure the spinner arm and feed tube are not clogged. If you are getting water to the middle tube but not the upper tube, there may be a clog or crack in the tube. We would also recommend checking the manifold and water inlet valve. Hope this helps!

Hi Mark, Thank you for your question. If the dishwasher has low water pressure, then water may not come out of the top spinner. Check both the water pressure and the water inlet valve. If the water inlet valve is not working correctly, then it may not provide water to the dishwasher. Look for any signs of damage, wear, or cracking, visually inspect the water inlet valve. If your valve shows signs of any of the symptoms described above, you will need a replacement water inlet valve. If the spinner or the spray arms are clogged, then water will not spray out of them. You will need to remove and inspect them. If they are clogged, give the a good cleaning and use a pin to clean the holes. We hope this helps! If you have any questions, please let us know.