Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Replacing your Whirlpool Washer Washer Agitator Cap Barrier w/Seal
Troubleshooting
This part fixes the following symptoms:
Will not agitate
Leaking
Does not dispense fabric softener or detergent
Marks left on clothes
This part works with the following products:
Washer
Washer Dryer Combo
Part# WPW10074580 replaces these:
AP6014843, 285551, 3347290, 3354733, W10074580
Customer Reviews
Average Rating:
★★★★★
★★★★★
13 Reviews
4.7
Filter By Rating:
5 Stars
12
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
1
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Raymond N - June 19, 2025
Verified Purchase
Whirlpool Agitator cap and seal
Great company, didn’t know if I could find the right part for my 1992 Whirlpool Heavy Duty Washer, the app also has videos of how to change the part and advise on removing and replacing parts
★★★★★
★★★★★
Walter B - November 5, 2019
Verified Purchase
Fit perfectly
Easy to install.
★★★★★
★★★★★
William K - January 4, 2023
Verified Purchase
Exact part ,very easy to install great service
Exact same part ,got it quickly, installed it in 2 mins,lol great service, probably going to need more parts she is knocking a little while washing, didn't take it apart yet for inspection, I'm a certified auto technician I love working on any kind of mechanical machine, thank you!
★★★★★
★★★★★
Robert S - February 22, 2018
Verified Purchase
Parts fit perfectly.
The PS11748113 Agitator Cap Barrier & O Ring was a perfect fit. Recieved Fed Ex package in 2 days as promised. It was a pleasure communicating with your sales representative who knew what I needed and promply place my order. Will recomnend and use PartSelect again when needed.
★★★★★
★★★★★
Kimberly S - June 27, 2019
Verified Purchase
Just what I ordered
The part was exactly what I ordered. I love the detailed, measured pictures that are on the website. Makes it easy to see if you have the right thing!
★★★★★
★★★★★
Lewis H - December 10, 2018
Verified Purchase
Easy Repair, Right part in good time fair price!
Easy Repair, Right part in good time fair price!
★★★★★
★★★★★
Ralph D - January 14, 2021
Verified Purchase
Simple, no nonsense
Installed easily.
★★★★★
★★★★★
Linda C - September 11, 2018
Verified Purchase
Leaking softener dispenser
Part received worked perfect. And loved that I did not have to spend a lot to bring my washer back to great working order
★★★★★
★★★★★
Judd K - July 12, 2020
Verified Purchase
Keener repair
repair parts arrived quickly and were awesome. Thanks
★★★★★
★★★★★
Gayle C - December 17, 2018
Verified Purchase
Easy to order correct part in
The part was delivered in a timely manner. The only complaint I have is the postage was $7.95, the part was only $5.00.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 30 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer came without fabric softener dispenser or barrier cap.
I watched the videos on YouTube and just swapped out the parts.
Begin by removing the fabric softener dispenser then the barrier cap can be pulled from the agitator this will allow access to the agitator retainer bolt use an 11mm socket and extension to remove it once the bolt is out the agitator assembly can be pulled straight up out of the machine. To separate the upper agitator from the lower placi
... Read moreng the agitator on the floor and placing your feet on the lower half and pulling up on the upper half will separate the two parts, however before performing this operation the agitator cam assembly may be heat set in place, looking down into the upper agitator there are four lugs that hold the cam in place if you use a sharp knife and cut thru the areas that have been heated and welded together separation of the two half's will be made easier. Once all the old cam parts are out reassemble the new parts the same way as the old ones were removed, the cam kit and the thrust washer kit come with a diagram in case you forget how to reassemble the parts. The agitator assembly simply slips back onto the drive splines, the attachment bolt has a seal under it that can be crushed if the attachment bolt is tightened too tight, I could not find a torque specification for this bolt so what I did was tighten the bolt until it contacted the seal completely and then applied just enough torque to turn the bolt until the agitator began to turn along with the bolt, then just install the barrier cap and seal and replace the fabric softener dispenser and the job is done, if you're washer is like mine I spent more time cleaning parts than actually performing this repair.
I just ordered the complete agitator kit since I didn't know for sure what I all needed, and it made my repair so easy replacing since it was all complete. I followed video which was a great help. Got it all done in 25 minutes. Very easy. Thank you...
Removed agitator found the agitator dogs were broke, identified all parts needed ordered from PartSelect, recieved all parts , repair was very simple 10 min job , works great! Saved lots of money !
Removed the agitator and seperated the top unit notice the cam arm were worn, order the parts on line Sunday After noon and recieved the parts the next week! Great service very easy I did call customer Service checking on delivery spoke Steve who was very helpful.
Just wanted to say that I was impressed with the service and speed of shipping.
I order one day in the afternoon, and I received it the next day in the morning. Parts worked fine and I was able to fix my washer in 15 minutes following the video explanation in your site. I'm very happy, thanks!
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Danny
January 18, 2018
No the washer tub went washing some time get's unbalance and start beating&banging and now some water leak's out
For model number wtw4800XQ2 washer
Hi Danny,
Thank you for your question. If the tub is shaking and banging, there are some parts that you will need to check to see which one is causing the issue. You will need to check the agitator directional cogs, the suspension rods, the suspension rod supports, the springs, the drive block, the inner seal cap, the rod supports, the agitator, the levelling legs and the clutch assembly. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Randy
July 6, 2023
Is there a lint filter on this model washing machine? We are getting marks, I assume lint, on our synthetic clothing. I have looked through the diagrams but haven't been able to find one listed.
Thanks
For model number la8800xsw1
Hello Randy, thank you for contacting us. According to our research, your model does not have a lint filter. If you have hard water and use powdered detergent, you may notice stains on your dark clothes. That is because powdered detergents do not always dissolve in hard water, which can leave streaks. To avoid this issue, be sure to completely dissolve powdered detergents in washing machine wash water before adding clothes. The best course of action is to switch to a hardworking liquid detergent if you are currently using a powder formula. We hope this sorts out your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
July 22, 2019
What's wrong when the machine is on spin the whole machine move across the floor banging
For model number WTW4800XQ4
Hello Robert, Thank you for the question. I suggest checking the Suspension Rod Kit, PartSelect Number PS11703290. The rods keep the tub balanced and from banging around. Hope this helps!
Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Washer","title":"Washer","url":"/Washer-Parts.htm"},{"position":2,"name":"Cap or Lid","title":"Cap or Lid","url":"/Washer-Caps-and-Lids.htm"},{"position":3,"name":"WPW10074580","title":"WPW10074580","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
