Part Location Diagram of WPW10074580 Whirlpool Agitator Cap Barrier with Seal
See part 2 in the diagram
Replacing your Whirlpool Washer Agitator Cap Barrier with Seal
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Agitator Cap Barrier with Seal WPW10074580

 Fits your KAWS700LQ0!
★★★★★
★★★★★
11 Reviews

Rated by 30 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 11.10
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your KAWS700LQ0!
PartSelect Number PS11748113
Manufacturer Part Number WPW10074580
Manufactured by Whirlpool
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Check if this fits your product and find model diagrams

Need help finding your model number?
Product Description

Agitator Cap Barrier with Seal Specifications

The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not agitate | Leaking | Does not dispense fabric softener or detergent | Marks left on clothes
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Whirlpool, KitchenAid, Maytag, Kenmore.
Part# WPW10074580 replaces these:
AP6014843, 285551, 3347290, 3354733, W10074580
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Danny
January 18, 2018
No the washer tub went washing some time get's unbalance and start beating&banging and now some water leak's out
For model number wtw4800XQ2 washer
PartSelect logo
Hi Danny, Thank you for your question. If the tub is shaking and banging, there are some parts that you will need to check to see which one is causing the issue. You will need to check the agitator directional cogs, the suspension rods, the suspension rod supports, the springs, the drive block, the inner seal cap, the rod supports, the agitator, the levelling legs and the clutch assembly. I hope this helps. Thank you and have a great day!

4 people found this helpful.

Was this helpful?
Thank you for voting!
George
January 8, 2022
#1 I watched your video on removing the Agitator Cap Barrier with Seal and it looked extremely easy but it will not come off for me. I don't want break the plastic. Do you have any suggestions on how to remove it? #2 the other thing is the softener dispenser. The one I have is not as long as the one in your video. Mine actually looks like the one in the parts diagram that you show on your website. It comes as an assembly. What I need to know is the part inside the assembly is shaped like a cone. Does the suppose point upward or down ward, in the assembly? Thank you for your time. George
For model number 11029822800
PartSelect logo
Hello George, Thank you for your inquiry. You can try using a flat head screw driver or putty knife to gently pry up the sides of the cap or alternatively use a little bit of soap or oil to loosen the cap. The videos are made for multiple models and are designed to give you a general idea of the repair. The top part of the dispenser should say liquid fabric softener dispenser, and the tapered part should point downward. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Randy
July 6, 2023
Is there a lint filter on this model washing machine? We are getting marks, I assume lint, on our synthetic clothing. I have looked through the diagrams but haven't been able to find one listed. Thanks
For model number la8800xsw1
PartSelect logo
Hello Randy, thank you for contacting us. According to our research, your model does not have a lint filter. If you have hard water and use powdered detergent, you may notice stains on your dark clothes. That is because powdered detergents do not always dissolve in hard water, which can leave streaks. To avoid this issue, be sure to completely dissolve powdered detergents in washing machine wash water before adding clothes. The best course of action is to switch to a hardworking liquid detergent if you are currently using a powder formula. We hope this sorts out your problem!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Robert
July 22, 2019
What's wrong when the machine is on spin the whole machine move across the floor banging
For model number WTW4800XQ4
PartSelect logo
Hello Robert, Thank you for the question. I suggest checking the Suspension Rod Kit, PartSelect Number PS11703290. The rods keep the tub balanced and from banging around. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Part Videos

Replacing your Whirlpool Washer Agitator Cap Barrier with Seal

Replacing your Whirlpool Washer Agitator Cap Barrier with Seal
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 30 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Washer came without fabric softener dispenser or barrier cap.
I watched the videos on YouTube and just swapped out the parts.
Other Parts Used:
Fabric Softener Dispenser
  • Rita from CARMEL, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator broken. Bolt missing.
Had to clean out area where bolt was to go as it was full of debris. Placed agitator on, bolted on , placed softener dispenser on. Done
Other Parts Used:
Washplate Bolt Fabric Softener Dispenser
  • Patrick from S BURLINGTON, VT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper agitator would not move
Begin by removing the fabric softener dispenser then the barrier cap can be pulled from the agitator this will allow access to the agitator retainer bolt use an 11mm socket and extension to remove it once the bolt is out the agitator assembly can be pulled straight up out of the machine. To separate the upper agitator from the lower placing the agitator on the floor and placing your feet on the lower half and pulling up on the upper half will separate the two parts, however before performing this operation the agitator cam assembly may be heat set in place, looking down into the upper agitator there are four lugs that hold the cam in place if you use a sharp knife and cut thru the areas that have been heated and welded together separation of the two half's will be made easier. Once all the old cam parts are out reassemble the new parts the same way as the old ones were removed, the cam kit and the thrust washer kit come with a diagram in case you forget how to reassemble the parts. The agitator assembly simply slips back onto the drive splines, the attachment bolt has a seal under it that can be crushed if the attachment bolt is tightened too tight, I could not find a torque specification for this bolt so what I did was tighten the bolt until it contacted the seal completely and then applied just enough torque to turn the bolt until the agitator began to turn along with the bolt, then just install the barrier cap and seal and replace the fabric softener dispenser and the job is done, if you're washer is like mine I spent more time cleaning parts than actually performing this repair.
Other Parts Used:
Spacer, Thrust Direct Drive Motor Coupling Agitator Cam Kit
  • Nathan from OCEANSIDE, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Worn out agitator directional clogs.
I just ordered the complete agitator kit since I didn't know for sure what I all needed, and it made my repair so easy replacing since it was all complete. I followed video which was a great help. Got it all done in 25 minutes. Very easy. Thank you...
Other Parts Used:
Washer Agitator
  • Dee from SNOHOMISH, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no agitation
Removed agitator found the agitator dogs were broke, identified all parts needed ordered from PartSelect, recieved all parts , repair was very simple 10 min job , works great! Saved lots of money !
Other Parts Used:
Agitator Directional Cogs Fabric Softener Dispenser Spacer, Thrust Washer Agitator Cam Kit
  • Samuel from Auburndale, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Machine would not agitate
Replaced worn parts with new ones ordered from your web site.
Other Parts Used:
Seal, Inner Cap Agitator Repair Kit Thrust Spacer
  • Michael from Chelsea, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
agitator cam teeth worn out
followed the repair video
Other Parts Used:
Agitator Repair Kit
  • Charles from Griffin, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top agitator cam arms worm
Removed the agitator and seperated the top unit notice the cam arm were worn, order the parts on line Sunday After noon and recieved the parts the next week! Great service very easy I did call customer Service checking on delivery spoke Steve who was very helpful.
Other Parts Used:
Washer Upper Agitator Agitator Cam Kit
  • Marvin from Lake City, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washing machine was making a loud noise
I unscrewed the agitator and pulled it out. Then took out the old agitator cam kit and put in the new one.
Other Parts Used:
Agitator Cam Kit
  • Duane from South Deerfield, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The agitator wasn't working.
Just wanted to say that I was impressed with the service and speed of shipping.

I order one day in the afternoon, and I received it the next day in the morning. Parts worked fine and I was able to fix my washer in 15 minutes following the video explanation in your site. I'm very happy, thanks!
Other Parts Used:
Agitator Repair Kit
  • FERNANDO from PALM BAY, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating:
★★★★★
★★★★★
11 Reviews
5.0
Filter By Rating:
  • 5 Stars
    11
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
You May Also Need?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11748113
Manufacturer Part Number: WPW10074580
Brand
Model Number
Description
Kenmore
11016922500
Washer
Kenmore
11016922501
Washer
Kenmore
11016922502
Washer
Kenmore
11016922503
Washer
Kenmore
11016922504
Washer
Kenmore
11016942500
Washer
Kenmore
11016942501
Washer
Kenmore
11016942502
Washer
Kenmore
11016942503
Washer
Kenmore
11016962500
Washer
Kenmore
11016962501
Washer
Kenmore
11016962502
Washer
Kenmore
11016962503
Washer
Kenmore
11016964500
Washer
Kenmore
11016964501
Washer
Kenmore
11016964502
Washer
Kenmore
11016964503
Washer
Kenmore
11016972500
Washer
Kenmore
11016982500
Washer
Kenmore
11016984500
Washer
Kenmore
11016986500
Washer
Kenmore
11020052990
Washer
Kenmore
11020052991
Washer
Kenmore
11020056991
Washer
Kenmore
11020072990
Washer
Kenmore
11020092990
Washer
Kenmore
11020096990
Washer
Kenmore
11020097990
Washer
Kenmore
11020112310
Washer - AUTOMATIC WASHER
Kenmore
11020112311
Washer - WASHER
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service