The O-Ring is included with this cap. It can be purchased separately as Part #WPW10072840.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer Agitator Cap Barrier with Seal
Troubleshooting
This part fixes the following symptoms:
Will not agitate | Leaking | Does not dispense fabric softener or detergent | Marks left on clothes
This part works with the following products:
Washer, Washer Dryer Combo.
Part# WPW10074580 replaces these:
AP6014843, 285551, 3347290, 3354733, W10074580
Customer Reviews
Average Rating:
★★★★★
★★★★★
11 Reviews
5.0
Filter By Rating:
5 Stars
11
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William K - January 4, 2023
Verified Purchase
Exact part ,very easy to install great service
Exact same part ,got it quickly, installed it in 2 mins,lol great service, probably going to need more parts she is knocking a little while washing, didn't take it apart yet for inspection, I'm a certified auto technician I love working on any kind of mechanical machine, thank you!
★★★★★
★★★★★
Ralph D - January 14, 2021
Verified Purchase
Simple, no nonsense
Installed easily.
★★★★★
★★★★★
Judd K - July 12, 2020
Verified Purchase
Keener repair
repair parts arrived quickly and were awesome. Thanks
★★★★★
★★★★★
Walter B - November 5, 2019
Verified Purchase
Fit perfectly
Easy to install.
★★★★★
★★★★★
Kimberly S - June 27, 2019
Verified Purchase
Just what I ordered
The part was exactly what I ordered. I love the detailed, measured pictures that are on the website. Makes it easy to see if you have the right thing!
★★★★★
★★★★★
DORISFLYNN - February 25, 2019
Verified Purchase
agitator cap was great
My washer is running a lot better now after I replaced the agitator cap and fabric softener parts.
★★★★★
★★★★★
Daniel R - December 27, 2018
Verified Purchase
Perfect
Exactly what I was looking for, and we are back up and running. Turnaround was very quick.
★★★★★
★★★★★
Gayle C - December 17, 2018
Verified Purchase
Easy to order correct part in
The part was delivered in a timely manner. The only complaint I have is the postage was $7.95, the part was only $5.00.
★★★★★
★★★★★
Lewis H - December 10, 2018
Verified Purchase
Easy Repair, Right part in good time fair price!
Easy Repair, Right part in good time fair price!
★★★★★
★★★★★
Linda C - September 11, 2018
Verified Purchase
Leaking softener dispenser
Part received worked perfect. And loved that I did not have to spend a lot to bring my washer back to great working order
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 30 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer came without fabric softener dispenser or barrier cap.
I watched the videos on YouTube and just swapped out the parts.
Begin by removing the fabric softener dispenser then the barrier cap can be pulled from the agitator this will allow access to the agitator retainer bolt use an 11mm socket and extension to remove it once the bolt is out the agitator assembly can be pulled straight up out of the machine. To separate the upper agitator from the lower placi
... Read moreng the agitator on the floor and placing your feet on the lower half and pulling up on the upper half will separate the two parts, however before performing this operation the agitator cam assembly may be heat set in place, looking down into the upper agitator there are four lugs that hold the cam in place if you use a sharp knife and cut thru the areas that have been heated and welded together separation of the two half's will be made easier. Once all the old cam parts are out reassemble the new parts the same way as the old ones were removed, the cam kit and the thrust washer kit come with a diagram in case you forget how to reassemble the parts. The agitator assembly simply slips back onto the drive splines, the attachment bolt has a seal under it that can be crushed if the attachment bolt is tightened too tight, I could not find a torque specification for this bolt so what I did was tighten the bolt until it contacted the seal completely and then applied just enough torque to turn the bolt until the agitator began to turn along with the bolt, then just install the barrier cap and seal and replace the fabric softener dispenser and the job is done, if you're washer is like mine I spent more time cleaning parts than actually performing this repair.
I just ordered the complete agitator kit since I didn't know for sure what I all needed, and it made my repair so easy replacing since it was all complete. I followed video which was a great help. Got it all done in 25 minutes. Very easy. Thank you...
Removed agitator found the agitator dogs were broke, identified all parts needed ordered from PartSelect, recieved all parts , repair was very simple 10 min job , works great! Saved lots of money !
Removed the agitator and seperated the top unit notice the cam arm were worn, order the parts on line Sunday After noon and recieved the parts the next week! Great service very easy I did call customer Service checking on delivery spoke Steve who was very helpful.
Just wanted to say that I was impressed with the service and speed of shipping.
I order one day in the afternoon, and I received it the next day in the morning. Parts worked fine and I was able to fix my washer in 15 minutes following the video explanation in your site. I'm very happy, thanks!
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Danny
January 18, 2018
No the washer tub went washing some time get's unbalance and start beating&banging and now some water leak's out
For model number wtw4800XQ2 washer
Hi Danny,
Thank you for your question. If the tub is shaking and banging, there are some parts that you will need to check to see which one is causing the issue. You will need to check the agitator directional cogs, the suspension rods, the suspension rod supports, the springs, the drive block, the inner seal cap, the rod supports, the agitator, the levelling legs and the clutch assembly. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Randy
July 6, 2023
Is there a lint filter on this model washing machine? We are getting marks, I assume lint, on our synthetic clothing. I have looked through the diagrams but haven't been able to find one listed.
Thanks
For model number la8800xsw1
Hello Randy, thank you for contacting us. According to our research, your model does not have a lint filter. If you have hard water and use powdered detergent, you may notice stains on your dark clothes. That is because powdered detergents do not always dissolve in hard water, which can leave streaks. To avoid this issue, be sure to completely dissolve powdered detergents in washing machine wash water before adding clothes. The best course of action is to switch to a hardworking liquid detergent if you are currently using a powder formula. We hope this sorts out your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
July 22, 2019
What's wrong when the machine is on spin the whole machine move across the floor banging
For model number WTW4800XQ4
Hello Robert, Thank you for the question. I suggest checking the Suspension Rod Kit, PartSelect Number PS11703290. The rods keep the tub balanced and from banging around. Hope this helps!