11747931-1-M-Whirlpool-WPM0805101-Ceramic Fuse - 20 amp
Part Location Diagram of WPM0805101 Whirlpool Ceramic Fuse - 20 amp
See part 47 in the diagram
( Grid squares measure 1x1 inch )
11747931-1-S-Whirlpool-WPM0805101-Ceramic Fuse - 20 amp 11747931-2-S-Whirlpool-WPM0805101-Ceramic Fuse - 20 amp Part Location Diagram of WPM0805101 Whirlpool Ceramic Fuse - 20 amp
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Ceramic Fuse - 20 amp WPM0805101

 Fits your MC1015UBB!
★★★★★
★★★★★
3 Reviews

Rated by 7 customers 

Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 10.18
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your MC1015UBB!
PartSelect Number PS11747931
Manufacturer Part Number WPM0805101
Manufactured by Whirlpool for Amana, Litton, Samsung, Maytag
Product Description

Ceramic Fuse - 20 amp Specifications

This microwave fuse is just over an inch in length. It has a white ceramic center, and metal on either end. This is a twenty amp 250-volt fuse, and is used to power your microwave. If your microwave will not heat properly, will not turn on, or the touch pad becomes unresponsive, there could be a faulty fuse which should be replaced. Remember, since this part contains an electrical charge, before you replace the fuse from your microwave, make sure that the power is disconnected from the unit. This part is sold individually. NOTE: Make sure your microwave is unplugged, and your capacitor is discharged before you begin this repair. A capacitor stores large amounts of electricity even after your microwave is unplugged.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Won’t turn on
This part works with the following products:
Microwave, Microwave Oven Combo, Wall Oven, Range.
Part# WPM0805101 replaces these:
AP6014669, 0044420, 0054121, 0057191, 0087050, 0312794, 14204182, 14204376, 14207948, 14208889, 14210231, 14212018, 14225047, 14QBP0239, 32669P01, 3601-001198, 4158060, 4158161, 4158378, 4158636 , 4329243, 4339350, 4339351, 4358177, 4358263, 4358704, 4375073, 51001230, 51001303, 54001099, 57001067, 58001220, 7-88133, 7-88559, 788133, 788559, A3194304, M0805101, M4D24, M4D34, M4D47, M4D74, M8051-1, M8051-2, R0713554, R0806001, R0859502, R8060-1, R9800424, WPM0805101VP, Y0044420, Y0054121, Y0057191, Y0087050, Y0312794 Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Abdul M - September 5, 2019
  Verified Purchase
easy way of repair
Microwave working fine.
★★★★★
★★★★★
Jeanne C - December 14, 2018
  Verified Purchase
It works
This ceramic fuse fixed my Mom Amana microwave which is from the 1980.
★★★★★
★★★★★
Lloyd S - July 24, 2018
  Verified Purchase
It wasn't the fuze
I ordered the part based on the schematics and recommendations for the symptoms I had experienced. Two major issues with this order. (1) I have a wall oven/microwave combination. The combination is not shown, only the microwave when I entered the part number. The microwave schematic indeed showed the fuse that I ordered. BUT, the fuse had not failed, it was a thermal circuit breaker between the oven power source and the microwave that was not shown. Reset the breaker and all is well. (2) I order this part and paid for second day FedEx delivery. It did not arrive. I went online with Parts Select Customer Service and chatted with Gordon. He determined that the part was lost by FedEx in transit from Fresno, CA through Bakersfield, CA to Onyx, CA, about 100 miles. Incredible! He said he would reorder, and I asked that instead of FedEx he have it sent via USPS in a simple envelope which would probably arrive overnight the way mail is distributed between the two locations. Gordon did not listen and simply reordered the parts and the same delivery method. The second order did arrive on the second day via FedEx. The first order arrive today 14 days later via FedEx Ground. So much for the completeness of the schematics. So much for expedited delivery. So much for trying to explain something to customer service via internet chat. This was all very disappointing since I have had excellent service from Parts Select in the past.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.9 / 5.0, 7 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Microwave not heating
Replaced diode works great. your website said 92% diode was problem and it worked. Order fuse in case old was blown did not have to use it.
Other Parts Used:
Black Sleeve Diode Ceramic Fuse - 20 amp
  • Tommy from FORT VALLEY, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No power to any microwave functions
Access is via RT. SIDE Panel as you face microwave. There are three screws on the bottom right edge to loosen. After that the side panel slips down and off. the fuse is located in the rear near where the power cord comes in. It is the white ceramic tube 1/4" in dia. and 1-1/2" long. Pull it out like any fuse and replace with new one. Reassemble and you are done!
Read less
  • Richard from CALIFORNIA, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave went pop and nothing would work.
I mistakenly thought I had to remove the microwave to get to the back, not so. I would have had access to what I needed to unscrew; but I have to admit the hassle of taking it down and putting it back equals having to work on it attached to the shelf-your call on how you do this. I unscrewed the front top to remove the vent piece that is across the top front of the microwave. This will reveal the control panel screw. (While you have the vent removed you might want to clean the vent and the exposed filter.) carefully lift and pull out control panel. I unplugged a piece as the wires were tied tight. It will not completely detach, so carefully tip it back from exposed insides. The fuse is not clear but white with silver ends so look in upper right for it. I popped it out and replaced it. Replugged the wired part to cover and carefully fit tabs in and slide down to secre. Replace screw, replace vent piece and secure screws on top of microwave. I plugged it in to test before putting it back above my stove.
Read less
  • Deborah from STRUM, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microve stopped working
Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise
  • Denice from Montgomery, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
14 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microwave oven blew fuse
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
.
Read less
  • tad from tamarack, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
26 of 41 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blows main fuse when the microwave generator start, (cooking function).
Remove microwave from oven cabinet. remove cover and check main fuse with ohm meter.
Tried fuse, it does not blow untill cooking starts.
Check capacitor with ohm meter, after properly performing capacitor dischagre procedure.
Order new capacitor, simple installation. another new fuse and all is good and cooking again.
Other Parts Used:
Ceramic Fuse - 20 amp USE ACP D8547912
  • Jay from Edwardsville, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
39 of 48 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Died while heating lasagna
Removed 4 small star head screws from back of microwave, lifted body off, removed blown fuse and replaced with new one (found where cord enters). This model is stainless inside and out and I like it a lot. It is also sold by Daewoo and a few other manufacturers.
  • connie from madison, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

6 questions answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Garrett
June 13, 2019
Where is the fuse located?The microwave lights up but no power
For model number rrl-8x
PartSelect logo
Hello Garrett, Thank you for the question. The fuse is located next to the Capacitor behind the control panel. Make sure your microwave is unplugged, and your capacitor is discharged before you begin this repair. A capacitor stores large amounts of electricity even after your microwave is unplugged. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Edward
February 26, 2020
I had engaged the cleaning cycle on the oven which is part of this combo unit and sits below the microwave. My wife decided to heat a up of water while the cleaning cycle was in progress. She claims the microwave started for a few seconds when the controls went blank and the microwave stopped working. The oven continued with the cleaning cycle which completed normally. No circuit breakers were tripped in the breaker box. I reset the circuit breaker for the appliance after the cleaning cycle had finished but the microwave continues to be unresponsive. The display on just the microwave is blank. The oven seems to work fine. Since the heat from the cleaning cycle vents through the microwave vents i am wondering if the fuse got too hot when the microwave was turned on a just blew. I am assuming the microwave and oven have separate fuses. If you believe it is a fuse how do i get to it to replace it. If not any suggestions.
For model number JMC8130DDS
PartSelect logo
Hello Edward, Thank you for the question. I would agree the fuse may have blown thinking the Microwave was over heating. We suggest replacing the fuse. Good luck with the repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Earl
March 19, 2023
WILL THIS FUSE REPLACE THE BLOWN ONE I REPLACED. I WANT A SPARE.
For model number SMH8165W (SAMSUNG)
PartSelect logo
Hello Earl, thank you for your question. The fuse is located on the Noise Filter PS4239678. Thank you and have a great day.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Noise Filter Assembly
$130.75

  In Stock
Edward
February 26, 2020
How do i get to the fuse - my microwave is attached to the over and installed as one piece into the wall -jmc8130dds. Are there any diagrams available that shows where the fuse is and how to get it in a combo unit? I assume i am going to have to pull the whole unit out of the cabinet.
For model number JMC8130DDS
PartSelect logo
Hello and thank you for writing. Yes, you are right, you would have to take the unit out, then take off the cabinet. You will see the fuse close to where the power cord comes in from the back of the unit, there should be a small board onto which the fuse is clipped on. We hope this information helps. Please contact us anytime if you require further assistance.

Was this helpful?
Thank you for voting!
John
October 10, 2022
This is a built-in wall unit above an oven. While the oven was being self-cleaned (hot!), the microwave was activated but went completely blank after a few seconds. I purchased the replacement ceramic breaker from you but don’t know where/how to look for the circuit breaker location in the microwave?
For model number Maytag UMC5200BAS microwave
PartSelect logo
Hello John, thank you for the question. Remove the microwave from the oven cabinet and remove the cover. The fuse is next to the capacitor behind the control panel. Always unplug your appliance before you begin any repair. We hope this helps!

Was this helpful?
Thank you for voting!
Beth
February 17, 2020
After 1-2 minutes of operating unit powers off. Have pulled out from wall and push reset switch on back of unit. Will power back on, but will shut off again after approx. 1 minute. Any suggestions on what may be causing this and if it can be fixed?
For model number JMC8130DDB
PartSelect logo
Hello and thank you for writing. It certainly sounds like it could be a faulty capacitor PS11743000 and/or possibly faulty door switches PS373050 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.

Was this helpful?
Thank you for voting!
Related Parts:
Door Interlock Switch Kit
$85.70

  In Stock
Capacitor
$122.53

  In Stock
  • 1
Back to Top
You May Also Need ?
Affresh Washing Machine Cleaner - 3 pack
$12.58
  In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
  In Stock
Produce Preserver Filter
$21.50
  In Stock
Affresh Cleaner
$19.09
  In Stock
Cooktop Cleaner
$17.74
  In Stock
Affresh Washing Machine Cleaner Tablets – 6 Count
$21.14
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747931
Manufacturer Part Number: WPM0805101
Brand
Model Number
Description
Amana
0500
Microwave - Amana Microwave 70 05.00
Amana
05000
Microwave - Amana Microwave 80 05.000
Amana
0501
Microwave - Amana Microwave 70 05.01
Amana
0502
Microwave - Amana Microwave 70 05.02
Amana
05030
Microwave - Amana Microwave 70 05.030
Amana
05501
Microwave - Amana Microwave 80 05.501
Amana
0552SS
Microwave - Amana Microwave 70 05.52ss
Amana
05530SS
Microwave - Amana Microwave 70 05.530ss
Amana
05540SS
Microwave - Amana Microwave 70 05.540ss
Amana
0572
Microwave - Amana Microwave 70 05.72
Amana
05730
Microwave - Amana Microwave 70 05.730
Amana
08000
Microwave - Amana Microwave 80 08.000
Amana
08001
Microwave - Amana Microwave 80 08.001
Amana
08500
Microwave - Amana Microwave 80 08.500
Amana
08501
Microwave - Amana Microwave 80 08.501
Litton
1008000
Microwave - Table Top
Litton
1009000
Microwave - Litton Microwave Model 1009.000 (1009000, 1009 000) Parts
Litton
1010000
Maytag
1011000
Litton
1015000
Microwave - Table Top
Litton
1018000
Whirlpool
10200
Maytag
102000
Litton
1020000
Litton
102001
Microwave - Table Top
Litton
102002
Litton
1021000
Microwave - Table Top
Maytag
1022000
Litton
1035000
Litton
1041000
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service
Ceramic Fuse - 20 amp
$ 10.18
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.