Ceramic Fuse - 20 amp WPM0805101 | Official Whirlpool Part | Fast Shipping | PartSelect
Ceramic Fuse - 20 amp – Part Number: WPM0805101
Ceramic Fuse - 20 amp – Part Number: WPM0805101 https://partselectcom.azureedge.net/Schematics/Maytag/1976.gif

Ceramic Fuse - 20 amp

Product Description

Ceramic Fuse - 20 amp Specifications

This microwave fuse is just over an inch in length. It has a white ceramic center, and metal on either end. This is a twenty amp 250-volt fuse, and is used to power your microwave. If your microwave will not heat properly, will not turn on, or the touch pad becomes unresponsive, there could be a faulty fuse which should be replaced. Remember, since this part contains an electrical charge, before you replace the fuse from your microwave, make sure that the power is disconnected from the unit. This part is sold individually. NOTE: Make sure your microwave is unplugged, and your capacitor is discharged before you begin this repair. A capacitor stores large amounts of electricity even after your microwave is unplugged.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Won’t turn on.

This part works with the following products:

Microwave, Microwave Oven Combo, Wall Oven, Range.

This part works with the following brands:

Amana, Litton, Samsung, Maytag, Whirlpool, Jenn-Air, Magic Chef, Crosley, Kenmore, Menumaster, Caloric.

Part # WPM0805101 replaces these:

14204182, 14204376, 14207948, 14208889, 14210231, 14212018, 14225047, 14QBP0239, 3601-001198, 4158060, 4158161, 4158378, 4158636, 4329243, 4339350, 4339351, 4358177, 4358263, 4358704, 4375073... Show More
Questions and Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 7 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Jay from Edwardsville, IL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPM0805101, D8547912
Blows main fuse when the microwave generator start, (cooking function).
Remove microwave from oven cabinet. remove cover and check main fuse with ohm meter.
Tried fuse, it does not blow untill cooking starts.
Check capacitor with ohm meter, after properly performing capacitor dischagre procedure.
Order new capacitor, simple installation. another new fuse and all is good and cooking again.
38 of 47 people found this instruction helpful.
Was this instruction helpful to you?
tad from tamarack, MN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPM0805101
microwave oven blew fuse
First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With the help of a bladed screwdriver, I pushed new fuse into holder, then replaced panel, screw and grill. This took less than 15 minutes even as one of the wires on control panel pulled out of connection and took some time to locate where to reconnect, otherwise was an easy fix
.
22 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Denice from Montgomery, AL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
WPM0805101
microve stopped working
Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise
11 of 17 people found this instruction helpful.
Was this instruction helpful to you?
connie from madison, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WPM0805101
Died while heating lasagna
Removed 4 small star head screws from back of microwave, lifted body off, removed blown fuse and replaced with new one (found where cord enters). This model is stainless inside and out and I like it a lot. It is also sold by Daewoo and a few other manufacturers.
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Deborah from STRUM, WI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
WPM0805101
Microwave went pop and nothing would work.
I mistakenly thought I had to remove the microwave to get to the back, not so. I would have had access to what I needed to unscrew; but I have to admit the hassle of taking it down and putting it back equals having to work on it attached to the shelf-your call on how you do this. I unscrewed the front top to remove the vent piece that is across the top front of the microwave. This will reveal the control panel screw. (While you have the vent removed you might want to clean the vent and the exposed filter.) carefully lift and pull out control panel. I unplugged a piece as the wires were tied tight. It will not completely detach, so carefully tip it back from exposed insides. The fuse is not clear but white with silver ends so look in upper right for it. I popped it out and replaced it. Replugged the wired part to cover and carefully fit tabs in and slide down to secre. Replace screw, replace vent piece and secure screws on top of microwave. I plugged it in to test before putting it back above my stove.
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Tommy from FORT VALLEY, GA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
WPR9800486, WPM0805101
Microwave not heating
Replaced diode works great. your website said 92% diode was problem and it worked. Order fuse in case old was blown did not have to use it.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Richard from CALIFORNIA, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WPM0805101
No power to any microwave functions
Access is via RT. SIDE Panel as you face microwave. There are three screws on the bottom right edge to loosen. After that the side panel slips down and off. the fuse is located in the rear near where the power cord comes in. It is the white ceramic tube 1/4" in dia. and 1-1/2" long. Pull it out like any fuse and replace with new one. Reassemble and you are done!
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
3 Reviews
4
out of 5
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11747931
Manufacturer Part Number: WPM0805101
Brand
Model Number
Description
Litton
1008000
Microwave - Table Top
Litton
1009.000
Microwave - Litton Microwave Model 1009.000 (1009000, 1009 000) Parts
Litton
1010000
Maytag
1011000
Litton
1015000
Microwave - Table Top
Litton
1018000
Whirlpool
10200
Maytag
102000
Litton
1020000
Litton
102001
Microwave - Table Top
Litton
102002
Litton
1021000
Microwave - Table Top
Maytag
1022000
Litton
1035000
Litton
1041000
Litton
1050000
Litton
1051000
Litton
120000
Litton
120001
Whirlpool
1285000
Whirlpool
1285A
Whirlpool
1290000
Litton
1304001
Maytag
1304002
Litton
1305000
Litton
1305001
Whirlpool
1305002
Litton
1305004
Whirlpool
1315000
Litton
1315001