Light Bulb - 120v 25w WPA3167501 | Official Whirlpool Part | Fast Shipping | PartSelect
Light Bulb - 120v 25w – Part Number: WPA3167501
Light Bulb - 120v 25w – Part Number: WPA3167501 https://partselectcom.azureedge.net/Schematics/Maytag/47406.gif

Light Bulb - 120v 25w

Product Description

Light Bulb - 120v 25w Specifications

This is a 120 volt, 25-watt light bulb that fits a variety of medium to large kitchen appliances. It functions by illuminating when the appliance door is open. It has a small base with a twist lock. This part is sold individually. This is a common wear part, so it is recommended order a spare and to check other appliance light bulbs in your home. This is an authentic OEM part that is sourced directly from the genuine manufacturer. Be careful when handling the light bulb; use a pair of needle nose pliers to remove the base if the glass bulb is broken.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part works with the following products:

Dryer, Microwave, Microwave Oven Combo, Vacuum, Washer, Range, Washer Dryer Combo.

This part works with the following brands:

Amana, Magic Chef, Norge, Kenmore, Maytag, Crosley, Admiral, Speed Queen, Jenn-Air, Whirlpool, Hardwick, Roper, Caloric.

Part # WPA3167501 replaces these:

0068901, 0087273, 0090395, 01060008, 01060018, 01060024, 01060028, 14202454, 202479, 21608, 25T8DC, 30283-A, 3387683, 3392120, 520224, 53-0177, 53-0570, 661555, 701247, 790170... Show More
Questions and Answers
Ask our experts a question on this part and we'll respond as soon as we can.
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 6 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Thomas from Oneonta, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
LA-1008, 12002126, WPA3167501, 341241
Dryer made a loud noise and vibrated badly
First I made sure the unit was unplugged. I popped the top of the unit with a slotted screw driver, lifted the top up and rested it against the wall behind the dryer. I removed the two screws - one on each side in front on top of the dryer cabinet. Then I tipped back the front panel of the dryer slightly with the door of the dryer closed. I unclipped the door switch with a slotted screw driver and then lifted the entire front panel including the door off of the the two floor clips on bottom. I set the front panel aside. Next I lifted the large drum slightly to dislodge the rollers in back and slid the drum back slowly while sliding the thin belt back on the drum until the drum was out of the unit and the belt was detached and loose. Then I cleaned the unit thoroughly, vacuumed all lint and dirt and wiped down the outside of the large drum with mineral spirits to make sure it was totally clean and smooth. Then I removed the two rollers and the roller shafts at the back of the unit following the directions enclosed. My slip-ring pliers came in handy to remove the retaining rings on the roller shafts. I replaced the rollers and roller shafts and the supplied washers and spacers as per the instructions. I sprayed a little WD-40 on the surface of the rollers and it stopped all squeaking and vibration of the drum. Next I replaced the front drum pads and runners as per the instructions. I then slid the drum back in place taking care to slide the new belt back around the drum in the same position as the old belt. Now came the difficult part - laying on the floor and reaching under the drum I positioned the belt around the motor shaft and tension pulley. This must be done by "feel" and must be done correctly!! Follow the instructions on the positioning of the belt very carefully and make sure it is in the correct position on the drum, motor shaft, and tension pulley! Next, get up and rock the drum up and down slightly to make sure it has engaged the two rear rollers properly. Rotate the drum manually one or two turns to make sure the belt is in the correct position. Then replace the front door panel by dropping it onto the two clips at the base of the unit and taking care to replace the door switch in reverse order of taking it out. Then replace the two screws at the top front on each side of the unit to secure the front panel. Lower the top of the unit back in place, plug in the dryer, turn it on and enjoy the lack of noise you have created.
48 of 56 people found this instruction helpful.
Was this instruction helpful to you?
Terri from Kingsland, TX
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPA3167501
Light Bulb
Using a flat-head screw driver, I removed the 1 screw from the small "door" on the back, upper right corner. Once the screw was removed, it allowed the door plate to "pop" open; exposing the old bulb. I removed the old bulb; replaced it with the new one. DONE!
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Kathtleen from Bristol, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPA3167501
burnt out lightbulb for over 20 years
Unscrewed back plate, and replaced bulb
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Deidre from Brownsville, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPA3167501
Microwave oven bulb had burned out
My Dearest One removed the screws that held the part that covers the bulb; removed the old bulb, put in the new bulb and replaced the cover.
The whole operation took less than 5 mins.
Thank you.
1 person found this instruction helpful.
Was this instruction helpful to you?
James from Owings, MD
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
LA-1053, WPA3167501
Dryer would not run.
First you need to raise the top in order to get to the parts. Then the door is removed, I did this in order to thouroughly clean the lint build up in the duct work. Then the high limit thermostat is removed in the back top part of the dryer, just above the heater. Then the heating element is removed by removing one long screw that holds the heater and the fused thermostat. Once all these parts are removed and the wires disconnected you simply reverse the process with the new parts. Put it all back together and everything works fine. Part Select.com also was helpful in diagnosing the cause of the problem. Thanks.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Mark from Howard Lake, MN
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
WP31001470, WP31001469, WP31001356, WPA3167501
Light Noise
Its good to clean all the lint out the the dryer and vents on a yearly bases as to many years of lint build up can catch on fire and make a mess . Replacing the glides was easy . Make sure you clean all the old glue , so the pads stay in place as there need to compensate for minor frame to drum differences .
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
2 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11747808
Manufacturer Part Number: WPA3167501
Brand
Model Number
Description
Kenmore
10687884100
Dryer
Kenmore
10687884300
Dryer
Kenmore
10687884600
Dryer
Kenmore
110.96802110
Dryer - Kenmore Dryer Model 110.96802110 (11096802110, 110 96802110) Parts
Kenmore
11086884100
Washer Dryer Combo
Kenmore
11086884300
Washer Dryer Combo
Kenmore
11086884600
Washer Dryer Combo
Kenmore
11086884700
Washer Dryer Combo
Kenmore
11086884800
Washer Dryer Combo
Kenmore
11086894100
Dryer
Kenmore
11086894300
Dryer
Kenmore
11086894500
Dryer
Kenmore
11086894700
Dryer
Kenmore
11086894800
Dryer
Kenmore
11086982100
Dryer
Kenmore
11086982110
Dryer
Kenmore
11086982300
Dryer
Kenmore
11086982310
Dryer
Kenmore
11086982700
Dryer
Kenmore
11086982710
Dryer
Kenmore
11086982800
Dryer
Kenmore
11086982810
Dryer
Kenmore
11086983100
Dryer
Kenmore
11086983110
Dryer
Kenmore
11086983130
Dryer
Kenmore
11086983300
Dryer
Kenmore
11086983310
Dryer
Kenmore
11086983700
Dryer
Kenmore
11086983710
Dryer
Kenmore
11086983800
Dryer