Maytag/Maytag_Thumb/11776.gif
See part 31 in the diagram
Replacing your Amana Refrigerator Light Bulb - 120V 25W play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Light Bulb - 120V 25W

★★★★★
★★★★★
10 Reviews

Rated by 8 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your C20AALWH!
 Fits your C20AALWH!
PartSelect Number PS11747806
Manufacturer Part Number WPA3073101
Manufactured by Whirlpool
Product Description

Light Bulb - 120V 25W Specifications

This light bulb is a 120 volt, 25 watt incandescent appliance light bulb with a small base screw-in that fits in a variety of appliances such as microwaves, refrigerators, freezers, cooktops, or stoves. Its purpose is to light up the appliance when the door is open. This is a genuine OEM part. You may need to replace the light bulb if the existing bulb is burnt out or broken. This light bulb is sold individually and is a common wear part, it is recommended to order a spare.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Refrigerator, Freezer, Microwave, Wall Oven.
This part works with the following products:
Amana, KitchenAid, Whirlpool, Maytag.
Part# WPA3073101 replaces these:
AP6014564, 0044462, 0056371, 040672-01, 040672-04, 040672-05, 045606-01, 05200256, 09100073, 14200025, 14205551, 14206369, 14218316, 14218317, 14218659, 14218667, 20174-1, 20174-2, 20174-3, 20174-4 ... Show more , 20174-5, 2223678, 2309101, 2326255, 24836P01, 4164470, 4174873, 4312826, 4358971, 4713-001172, 4713-001197, 52001003, 53001359, 53001773, 54001046, 56001350, 58001043, 58001101, 58001310, 60001060, 61003236, 61004862, 6521, 67006179, 68001062, 8190269, 90051, A3073101, A3079001, A3079001Q, A3079002, A3079003, A3079007, A307901, A3709001, M9D29, R0213161, R0662001, R0812001, R0812005, R0862001, R9900292, W10904371, W10904373, WP2326255, WP61003236, Y0044462, Y0056371, Y04067201, Y04067204, Y09100073 Show less
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

11 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dale
September 18, 2017
I am looking for a two stage light bulb, a high, low for underneath a microwave.
For model number MMV5156AAS
Hi Dale, Thank you for your question. That would be this part. Good luck with your repair.

7 people found this helpful.

Was this helpful?
Thank you for voting!
Ken
November 18, 2021
I'm looking for the replacement light bulbs for this refrigerator. Your site shows a 25 watt bulb, mine should be 40w, and the same shape as the 25w bulb you show. Mine should also be tinted blue. Do you have this bulb?
For model number WRS526SIAH00
Hello Ken, thank you for writing. Yes, we do carry the 40 watt blue tinted bulb. It is part PS11754344. We hope this helps.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Bill
January 8, 2018
I have a light that is out in the top level of the cabinet. Your web site says it should be part number ps11747806, or control # 19, 25w. However, that bulb does not work. The burned out bulb I took out is 40 watt medium. The 25 w bulb does not fit. Traditional 40 w bulbs from local stores did not work. Or could it be a blown fuse. Everything else inside the refrigerator is functioning normally.
For model number KSCS25FSBT00
Hi Bill, Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS884734 for the 40 W bulb. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Darlene
August 13, 2019
Trying to replace top inside light bulb ,there are 2 but don't know how to get the bulb out . I tried to turn it but does not turn. Need help
For model number WSF26C3EXF01
Hello Darlene, Thank you for the question. Here is a link for a video on installing the bulb. Hope this helps! https://www.youtube.com/watch?v=EHiY1H9fKHE

3 people found this helpful.

Was this helpful?
Thank you for voting!
Pete
November 24, 2019
Replacing one of the two bulbs that is on the bottom of this microwave which is attached to the cabinet above. This bulb lights up my electric oven range which sits below the microwave and is burned out. What is the part number for the bulb? Does the bulb have two levels of brightness? What is the volts and wattage of the bulb ?Thank you
Hello Pete, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11747806 for the 120V 25W Bulb with a Hi Low setting. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Don
March 18, 2020
One of two lamps in refrigerator is burned out. The bulb is marked 120v40w. The replacement bulb offered is 120v25w. Is this the only bulb available?
For model number wsf26c3exf01
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Light Bulb - 40W - Part# PS884734.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Sandra
October 5, 2021
I need a bulb for refrigerator top ceiling part of two. Is there a 40W tubular shaped bulb or do I need a 25W tubular?
For model number GsF26C4ExYoo
Hi Sandra, Thank you for your question. The light bulb that you will need in the upper portion of the refrigerator section is a tubular shaped light bulb. The part number listed under your model number for the light bulb is PS11747806. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ed
October 4, 2022
My KitchenAid refrigerator's top bulb needs replacing its a 120V40W blue tinted bulb. Not sure what the part # is, also when facing the refrigerator its the one of the top left if that matters. Thanks.
For model number KSCS23FTSS02 bulb
Hello Ed, thank you for contacting us. We have researched the model you have provided and have found that the part you are looking for is part number PS884734. If you would like assistance placing an order, please contact customer service. Good luck with your repair!

Was this helpful?
Thank you for voting!
Related Parts:
Martin
April 16, 2018
The light under the microwave / above stove is not working , i tried to change the bulb but that did not fix it , it seems that there is power to the socket but it wont light up the bulb
For model number MMV4205AAB
Hi Martin, Thank you for your question. If the socket is checking out find, you will need to check the wiring connected to the socket to see if it is fine. You can check it with a multimeter. You should also check the control that allows you to turn the light on to see if there is an issue with that as well. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Moonsamy
May 30, 2019
I am looking for a 120v 20w bulb for my KitchenAid freezer. Model is kffs20eyms00
For model number KFFS20EYMS00
Hello Moonsamy, thank you for writing. This 120v, 25w Light Bulb part PS11747806 is the only replacement listed for your model. It will function as what was in there already.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Amana Refrigerator Light Bulb - 120V 25W

Replacing your Amana Refrigerator Light Bulb - 120V 25W play video
Customer Repair Stories
 Average Repair Rating: 4.5 / 5.0, 8 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The door was crocked and wouldn't shut properly
Everything was easy. I read one of your other reviews and it gave me the confidence to try it myself. First i toke off the cap at the top of the door then the three screws. I lifted the door off so i could be sure the cam was my only problem then put the door back on. That took 5 mins. Then I got on the computer and ordered the parts i needed. Two days later the parts arrived and and i took the door off again. Then put the new cam on, applied a litle vasiline, put the door back on and forgot that i ever had a problem. Thanks for the help. Doug Arau
Other Parts Used:
Door Closure Cam Kit Light Bulb - 40W
  • Arau from Haverhill, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers, Wrench (Adjustable)
44 of 51 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
There was a chattering Noise from Adeptive Defrost Assy
I first dropped the Cover Assy, which covers lites and controls, this was done by pulling it forward and it drops down, did not remove top shelf so It was a bit difficult to tilt cover assy. for removal. There is a srew located close to filter assy. in back use nut driver 1/4"located to remove this screw, there are then 2 screws located to the rear and side of light holders, both phillips head, the one on the left side is a bit tricky to remove but I use a thin bladed scredriver, Next there are 2 screws located on both ends od the slides that control temp, both again removed witn1/4 " nut driver, the whole upper assy drops down and forward the Adeptive Defrost assy is located in the back right corner of this assy, unplug the wires and unit snaps out, I foud it easier to pop off top cover of new unit so I could see connector assy when I reattached the wires, then replaced the top assy and snapped new unit it place, Reassymbly was reverse of removal, before placing cover assy back in place I replaced both lamps as 1 was out .
Other Parts Used:
Adaptive Defrost Board
  • Herman from Hughesville, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
27 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burnt out bulb
took cover off, installed bulb.
lost the owners manual,
part select's schematics were very helpful
thanks
  • THOMAS from STOW, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
26 of 60 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker not making ice, also needed drumwheel for the front of the ice bucket, wouldn't crush ice , and ice would get stuck
Took the rear bottom panel loose , the ice maker and water dipenser valve is in the right corner. Turn off water line to the refrigerator , and also unplug the electric from the outlet. It is easier to take the ground wire loose from the valve bracket now , before taking valve out of the bracket. take the two water lines that run to the door and the ice maker loose, then remove the main inlet line. Once you have the water lines off, then you can remove both electrical plugs from the electric coils. The water lines that run to the door and the ice maker cant be confused , because they are two different sizes , so they will only fit the correct side. The electrical plugs are pretty simple as well as, the wires are the same color as the coils, so its fairly easy to see which one goes where. The replacement process is pretty self-explanitary , just reverse the order. Just as a hint of advice , have a sponge or mop ready to clean up the water that comes out of the lines when you remove them. I also changed the drum wheel in the front of the ice bin, this process is not easy if you let the blades and spacers fall apart , as they have to pretty much have to be in correct order , or your ice bin will not crush ice , and you could possibly bust the bin into pieces. The process is not really hard , just pay close attention to what is coming off from where!!! There are two bolt on the bottom of the front cover , take them loose and pull the cover forward from the bottom, then lift a little , should come off. Then the metal front cover should be exposed, ther are two bolts in it as well , remove them , and the front should be loose , this is when you hold the auger and keep an eye on the blades. There is also a nut , right in the center of the wheel you have to take loose , hold the auger then take the nut loose with a 1/2 in. wrench. Once you remove the nut the drum pulls right off the auger. When going back together , make sure the ice crusher blades all line up correctly , as the blades wont work at all . They have to slide back into the blade pivot bracket (slot made into the plastic bucket front). As I said before , be sure and pay close attention , and this process will go easily. The drum is marked front side , or this side out, be sure its installed correctly , as the ice will not feed right. The first cycle of the ice maker making ice will probably be only 1 or 2 cubes , but the second time around you will have a full set of 8 , the water lines get air in them while they are unhooked so you wont get a full cycle the first time.
Other Parts Used:
Ice Maker Water Inlet Valve Crushed Ice Wheel Light Bulb - 7W
  • Andy from Somerset, KY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light blew out
change light bulbs
  • KELVIN from SOUTHFIELD, MI
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer cold, refrigerator not cooling
First I removed the top shelf and its contents to allow for more room. Then I removed the plastic temperature control housing by tugging housing forward and releasing it from the two clips located at the upper rear corners of the fridge. Then pull down. Then I removed the three screws holding the entire temperature control assembly and dropped it down to access and remove defrost assy. Installed new defrost assy. and re-assemble in reverse. Change light bulbs before replacing final housing. Also, a good time to clean housing interior before re-installing.
Other Parts Used:
Water Filter Adaptive Defrost Board Door Handle - White
  • Michael from Chesterfield, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker stopped working-Fridge failed to defrost and stopped cooling in both compartments.
I popped out the side panel to the right of the ice maker and removed the ice tray-then used a nutdrive to remove the screw under the ice maker. Lifted up on the unit , dropped it down and used a flat head screwdriver to press the tab in on the electrical connector at the rear-then removed the unit from the Freezer. The end cap that covers the controls on the old unit snapped off easily as did the small metal tab (both needed to be placed on the new one) and I re-installed the new ice maker doing the reverse of the removal. Watch to make sure that the white rubber water line goes back into place as you remount the ice maker in the Freezer.

As for the thermostat, I loosened the temperature control cover in the top of the refrigerator by pulling down on it, needed to pull out a bit to clear the control levers-easier if they're centered on the 5. I removed the retaining screw in the center of the rear of the cover using a nutdriver, and that lowered the cover enough to remove the screws that held the thermostat assembly in the upper right (also using the same nutdriver that worked on everything else). I removed the electrical connector from the old thermostat and attached it to the new one. The old thermostat didn't have a cover on it like the new one, and it was easier to make sure that the electrical connector was attached by popping the cover apart-attaching the connector, and then snapping it back together. The new unit snapped into place by pressing down firmly, then I re-assembled the cover plate doing the reverse of the removal.

If you don't count the two hours that I spent defrosting the freezer coils with a hair dryer-these were FAST repairs, and the refrigerator is running like new again
Other Parts Used:
Adaptive Defrost Board Replacement Ice Maker
  • Bradley from Cosmopolis, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light over range burned out
Philips screwdriver
Removed screw (1)
Removed light bulb
Put in new light bulb
Closed door to bulb compartment
Returned screw.

Pro tip! Check how many bulbs you need before ordering. Mine only needed two. I got two. I suspect I’ll buy a new microwave before new bulb burns out again. Ordering/delivery was fast. No need to have spare on hand.
  • Vincent from CHICAGO, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
10 Reviews
4.1
Filter By Rating:
  • 5 Stars
    7
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    2
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747806
Manufacturer Part Number: WPA3073101
Brand
Model Number
Description
Kenmore
10641522500
Refrigerator
Kenmore
10641523500
Refrigerator
Kenmore
10641524500
Refrigerator
Kenmore
10641529500
Refrigerator
Kenmore
10644022600
Refrigerator
Kenmore
10644022601
Refrigerator
Kenmore
10644022602
Refrigerator
Kenmore
10644022603
Refrigerator
Kenmore
10644023600
Refrigerator
Kenmore
10644023601
Refrigerator
Kenmore
10644023602
Refrigerator
Kenmore
10644023603
Refrigerator
Kenmore
10644024600
Refrigerator
Kenmore
10644029600
Refrigerator
Kenmore
10644029601
Refrigerator
Kenmore
10644029602
Refrigerator
Kenmore
10644029603
Refrigerator
Kenmore
10644032600
Refrigerator
Kenmore
10644032601
Refrigerator
Kenmore
10644032602
Refrigerator
Kenmore
10644032603
Refrigerator
Kenmore
10644033600
Refrigerator
Kenmore
10644033601
Refrigerator
Kenmore
10644033602
Refrigerator
Kenmore
10644033603
Refrigerator
Kenmore
10644034600
Refrigerator
Kenmore
10644039600
Refrigerator
Kenmore
10644039601
Refrigerator
Kenmore
10644039602
Refrigerator
Kenmore
10644039603
Refrigerator

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service